|
| 1 | Providing,designing and Fixing of Chest Press Chair Double Code 9124 of size 1800x700x2000mm fabricated with main post of 114 mm dia and 3mm thick and other pipes of 40mm dia 3mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120mm micron thick using Akzo Nobel or equipment in desired shade and colour. all welding joints of pipes shall be robotic welded with joint scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of version LLDPE plastic by rotational moulding with minimum 4mm thickness UV resident and colour as approved by engineer in charge. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed compony douly sealed and self lubricated to be approved by engineer in charge. Equipment to be fitted with in built limiters. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set Fixing the equipment on to it and cover nuts and bolts. the equipment should be koxtan in quality including GST and Installation charges |
| 2 | Providing,designing and Fixing of SEE SAW fabricated with main post of 114 mm dia and 3mm thick and other pipes of 40mm dia 3mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120mm micron thick using Akzo Nobel or equipment in desired shade and colour. all welding joints of pipes shall be robotic welded with joint scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of version LLDPE plastic by rotational moulding with minimum 4mm thickness UV resident and colour as approved by engineer in charge. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed compony douly sealed and self lubricated to be approved by engineer in charge. Equipment to be fitted with in built limiters. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set Fixing the equipment on to it and cover nuts and bolts. th the equipment should be koxtan in quality |
| 3 | Supply and Erection of 1-HP Submersible Pump with Starter, copper wire (2.5 mm 3 core) including Bore and Pipes as per requirement of site to complete the work in all respect up to entire satisfaction of engineer-in- charge. (Make: - Crompton| Jindal| V-Guard |) |
| 4 | Pull and Power Push Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.. |
| 5 | Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.. |
| 6 | Dual Sky Stepper or Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc... |
| 7 | Providing and fixing of a Garden Hut- Octagonal One Side Length 9` Outer Side Hight 8` Center Hight 11` Complete with Bench..... |
| 8 | Chain Swing Jhulla- (Two sheater) (10’ height) x (8’ width) with Bearing along with 2” dia M.S. pipe length and top 48’ 1.25” pipe and support 7’ with Chain and hook etc. along with Bearing and bracket Top box of M.S. sheet and 4 Nos M.S. sheet of Patti seat for children with coat paint of Berger paint (painting charges) Bottom hole fast 4 Nos. 1” round axle for bearing 2 Nos...... |
| 9 | Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom.......... |
| 10 | EARTH FILLING LEAD UP TO 10 KM INCLUDING LOADING UNLOADING |
| 11 | OK PLAY SWING -ECONOMY |
| 12 | OK PLAY FUNSTATION ECONOMY MODEL-2 |
| 13 | OK PLAY ARM WHEEL (SKU: ed81751671dc) |
| 14 | OK PLAY LEG PRESS (SKU: 0cfa99db6ba4) |
| 15 | Earth filling with Good Earth lead up to 10 km (As per HSR 3.1.2) |
| 16 | Leg Press:- Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalentof 80-120 micron thick |
| 17 | Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber |
| 18 | Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micronthick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured byrotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. |
| 19 | Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding Joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. |
| 20 | Pull and Power Push Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 x 2000 mmfabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. |
| 21 | SEE SAW Providing and fixing Deluxe Playways Industries Blow moulding Indoor Fun See Saw complete in all respect as per satisfaction of engineer in charge. |
| 22 | Multistation with size 27*15*13ft with 1 Nos Climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 feet long Spiral Slider of 6mm thick, 10 ft Long Wave Slider of 6mm thick, Tunnel 5 Ft Long of 4mm thick Etc. with 3` sq.pipe, 1.6` sq.pipe, 3`*1` sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom. |
| 23 | Providing and fixing of a Garden Hut (Octaganal One Side Length 9` )Outer Side Hight 8` Center Hight 11` Complete |
| 24 | Supply and Erection of Decorative pole Lotus shall be made of Mild Steel 4mtr. height with die cast embellishments and double arms decorative bracket of predefined design to hold the street light of 60W each. Pole shall be made out of Mild Steel Pipe having 76mm x 3mm x 1000mm atTop, 90mm x 3.2mm x 2000mm mid and bottom base of decorative die cast with base plate of size 500mm x 500mm x 10mm. Queen light fixture shall be made of die cast aluminum base and top with crown shaped ring. The top of the fixture is combined with bottom through extruded aluminium hollow arms. The complete fixture gives a royal finish of the tradition era. Pole having Provision for inside termination box with 4way connector and 1 Nos 6 Amps MCB for local isolation as per direction of electrical standard. Entire pole. light and decorative brackets should be painted with proper zinc primer and Polyurethane powder coat/paint Pole is inclusive of 60-watt LED Post top with luminous flux 54001m luminaire efficacy 90lm/w, IP65, CCT:3000K/4000K/6000K as required by project, CRI)70, Maintenance of lumen 50,000hrs. @ L70, operating temp. 0 to plus 40°C, Input voltage 140 to 270VAC, 50Hz. The decorative pole is suitable for outdoor lighting application. Pole is complete in all aspects with all accessories without foundation bolts. (Make: -Vak, Vipin S.T. Pole, Glowmac) |
| 25 | Multiplay Station |
| 26 | Double Twister Machine-DT-110 |
| 27 | Providing and fixing of a Garden Hut (Octaganal One Side Length 9` ) Outer Side Hight 8` Center Hight 11` Complete.. |
| 28 | MERRY-GO-ADAPTMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer outdoor grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine, Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine... Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized powder coating Lead Capacity: Minimum 150 kg per platform. mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zine primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine, Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposedbolts. Surface Coating Primer: Epoxy zine-rich primer (40 microns) Top Coat: Ourdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 29 | ARM REVOLVE ASSISTMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088 3 mm thick Pipe and 025 mm round M.S bright bar in bending design. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade6305 `2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar Bearing bushes: 075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Closing caps: are of PP/NYLON/HDPE materia!. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.Rubber: Safety base pads. Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations Powders Coating. All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.Safety Instructions and Exercise chart on machine - start and finish position chart stick on |
| 30 | GONDOLA SWINGMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.. Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Min Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe.Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. stallation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 31 | XOXO PANELTEXTMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked 151239 Minimum 114 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. A.Play panel LLDPE (Linear Low-Density Polyethylene), roto-moulded Thickness: 6-8 mm wall thickness. Finish Seamless, anti-static, smooth surface UV Resistance. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation. Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 32 | PLAYFUL PANELMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 114 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.A.Play panel designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for engaging graphics through play. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional). Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 33 | WheelchairDescriptionAmount (in Rs)Providing and supplying standard manual wheelchair made of high-quality powder-coated/mild steel tubular frame with durable, corrosion-resistant finish. The wheelchair shall be foldable type for easy storage and portability.Technical Specifications:Frame: Mild Steel/Aluminum, powder-coated finishSeat Width: Approx. 18 inches (450 mm), made of durable, washable canvas or PVCupholsteryBackrest: Fixed/Foldable with reinforced supportA.Wheels: Rear wheels: 24` solid rubber with hand rims for self-propellingFront wheels: 8` PU/solid rubber caster wheelsBrakes: Manual parking brakes on both rear wheelsFootrests: Foldable/Detachable, height-adjustable with heel support strapArmrests: Fixed or flip-up cushioned armrestsLoad Capacity: Minimum 100 kgFoldable Design: For convenient storage and transportationWarranty: Minimum 1 year against manufacturing defect |
| 34 | DUETMain Structure Material: Stainless Steel 304 Grade, 1.5-2.5 mm thick pipe or tubeDimensions: Minimum 60-32 mm outer diameter (OD), 1.5-2.5 mm thicknessCap HDPE Heigh dencity polyetheline 20mm thickness.Fasteners Material: Stainless steel fasteners are specified to BS EN ISO 3506. Part 1 coversbolts, screws and studs.A.Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended |
| 35 | FISHY FUNNY SEE SAWMain Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring, High-carbon steel or alloy spring steel, 18 mm-20 mm wire thickness, Coil height: Approx. 300 mm.Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Shot Blasting surface treatment process using high velocity, steel abrasive Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 36 | CHEERFUL CHURNMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automaticPipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding HeighPower Machine Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar.Bearing bushes: 089mm OD seamless pipe.Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic.Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 37 | Sea-SawMain Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fullyA. automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring. High-carbon steel or alloy spring steel, 18 mm 20 mm wire thickness, Coil height: Approx. 300 mm. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.Surface Coating Primer: Shot Blasting surface treatment process using high velocity, steel abrasive Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional). Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 38 | SIT `N` SNICKER SWING -Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zine primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.. Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform.Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut.Pins: are made up of M.S bright bar.Bearing bushes: 089mm OD seamless pipe.Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 39 | EPDM Providing and laying 16mm thick EPDM rubber flooring, comprising of 10mm thick Rubber buffing and EPDM Granules of 6mm on cleaned Cement concrete base including binder, thinner and all required equipment, transportation of material etc. Complete in all respect and as per engineer in charge. |
| 40 | Street Light Controller 32 AMP.. |
| 41 | Digital Timer Street Light.. |
| 42 | Supply and Erection of PU Painted 3Mtr. Decorative Pole made out of GI Pipe with MS Base Plate Dia 340 x 12mm, Au. Casting on Joint, Inbuilt Control Box at the bottom of the pole for space for Housing MCB and Terminal Strip etc. 114.3mm x 1000mm (1 Section), 60.1mm x 2000mm (2nd Section), with foundation including nuts and bolts 16 x 450 x 4 Nos, without bracket, with polyurethane painted as per given color shade with electrical accessories like backlite sheet and MCB wire and Post Top LED light of 30 watts (of colour Green, Red, blue, White and Warm White) fixture made of pressure die cast/aluminium Spun housing with front opening PC diffuser having IP65 protection, PF)90, Lumen-110/W with high, Efficiency LED, THD-10%, potted driver with 6 KVA surge protection complete in all aspects with all accessories except foundation bolt. (Make: as per PWD approved) |
| 43 | Deduct - Recovery of Scrap Material (Grill Recovery) |
| 44 | Deduct -10% Brick Recovery1 cum in 500 brick |
| 45 | Deduct - Recovery For Main Gate Size 8` x 4` for market rate 1Kg@Rs 32/ |
| 46 | ESTIMATE FOR UP-GRADATION, REPAIR/ CONSTRUCTION AND MAINTENANCE OF GREEN BELTS, VARIOUS PARKS IN VARIOUS SECTORS, DEVELOPMENT OF NEW PARKS IN NEWLY APPROVED COLONIES and DEVELOPMENT OF PARKS FOR PERSONS WITH SPECIAL ABILITIES IN MC HISAR Please Enable Macros to View BoQ information |
