|
| 1 | Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres A. Prestressed / Reinforced cement concrete grade M-20 & above B. DIsmantling of Old Bridge |
| 2 | Milling of Bituminous Surface -Removing of asphalt courses by milling machind in layer including transporting the removed materials outside for disposal upto 5 km lead and above complete, sample must be approved from Engineer-in-charge prior to start the work, including cutting of Asphalt/ concrete surface of periphery by cutting machine etc. all complete as directed by Engineer-in-charge. (a) For milling depth upto 55 mm. including disposal & stacking of material up to all lead and lift etc. all complete as directed by Engineer-in-charge. |
| 3 | Tack Coat on Cement concrete pavement (Providing and applying tack coat with bitumenemulsion using emulsion pressure distributor at the rate of 0.30 to 0.35 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.) |
| 4 | Bituminous Concrete Grading -II (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects) |
| 5 | Mastic Asphalt (Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine-grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 1000C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516.) |
| 6 | Rebar of 16 mm,12mm dia to 10 mm dia Reinforcement (Without Steel) For Crash barrier , Kerb , Electric Pole, Etc. (Depth -100MM to 150mm) |
| 7 | Providing and laying 80mm thick faciory made cement concrete paver block M-35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over andcoarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge |
| 8 | Drainage Spouts complete as per drawing and Technical specification |
| 9 | Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) |
| 10 | Applying two coats of Birla or Asian acrylic ( putty) and manufacture on new concrete surface of constructed Bridge across the river to give an even shade including thoroughly brushing the surface free from and other foreign matter and sand papered smooth.including all Material, equipment , labour, transportation & all other temporary arrangments necessary to Complete the job. as diecided by Engineer inChange . |
| 11 | Plain/Reinforced Cement Concrete in Foundation complete as per Drawing and Technical Specifications. (A) PCC Grade M15 using batching plant transit mixer & Concrete pump |
| 12 | Plain/Reinforced Cement Concrete in Foundation complete as per Drawing and Technical Specifications. (A) RCC Grade M40 using batching plant transit mixer & Concrete pump, Including necessary Shuttering work etc… Crash Barriers, Kerbs and Approach slab |
| 13 | Providing and placing in position FE 500D bar reinforcement for following items including cutting bending hooking and tying complete as per detailed drawing.For well :- Crash Barrier , Kerb , Approach Slab |
| 14 | Providing and Laying 110 mm dia PVC Pipe 10 Kg footpath, etc completed |
| 15 | Providing and Laying 75 mm dia HDPE DWC pipe through Crash barrier etc completed |
| 16 | Single Arm Street Lighting (Supplying, erection,testing and commissioning of 9 Mtr height decorative chatsworth pole having cast iron decorative base and pipe dia of 165 mm & 3 mtr long with cast iron reduce joining with 101mm OD straight pipe. pole shall be mounted on square base plate.Decorative cascade bracket with 940m height mounted with PU paint in closed paint chamber with heating treatment in chamber Make kesciee schreder. Model : Chatworth pole with cascade Bracket, bajaj sultan, Surya or cromton makes as per drawing and directed by Engineer in Charge.& Supplying and erecting and testing & Commissing of decorate luminaires for urban lighting, body made of painting spun aluminium. the protector is make of polycarbonate grade UV resistant (IK08), permanently scaled optical compartment with IP66 Protection Luminaire offers tools free can be Installed as a suspended luminaire. the Luminaire is equipeed with the lenso flex2 (R) technology photometric system, PMMA lenses with wide photometry for increased pole spacing. fixtures having a surge protection of 10KV. for operating temperature (Ta) From 20 to 50 C. Driver can with atant 320 V AC for 48 Hours and 360 V Ac for 2 Hours Make -Keselec Scheder, Model : PORTO 75 W LED, Bajaj Borage 75 W led, Surya of Cromton, PT 75 W VEGA or LT Company Makes as Per Drawing and as Approved by the Engineer in Charge, including necessary requirement of electrical cables etc. complete as directed by Engineer-in-charge. |
| 17 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) |
| 18 | Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973) |
| 19 | New Metal Beam Crash Barrier:- Type - A, \\"W\\" : Metal Beam Crash Barrier (Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811) etc. complete, sample must be approved from Engineer-in-charge prior to start the work. |
| 20 | Painting over Metal Beam Crash Barrier, Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. Including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth etc. complete. On steel work, existing steel/GI railing. sample must be approved from Engineer-in-charge prior to start the work (Paint: Asain Apcolite Advanced, MRF Epidec and primer: Apcolite Advanced MRF Epidec or as approved by Engineer-in-charge) Please Enable Macros to View BoQ information |
