|
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 2 | Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 3 | Providing and laying Cast in situ /Ready Mix cement concrete in M20 of trap/granite/quartzite/gneiss metal for steps including steel centering, formwork, laying /pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.),with fully automatic microprocessor based PLC with SCADA enabled reversible DrumType mixer/concrete Batch mix plant(Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 4 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps,footings,foundations,slabs,beams columns, canopies,staircase,newels,chajjas,lintels pardis,copings,fins,arches etc. as per detailed designs,drawings and schedules.including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required complete. |
| 5 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 6 | Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 7 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. |
| 8 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. |
| 9 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 10 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 11 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 12 | Providing and fixing in position (as per 1868:1982) Aluminium sliding window of three tracks with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm. thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc. complete with power coating without box. |
| 13 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 14 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete |
| 15 | Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 16 | Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 17 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 18 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofingcompound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixedwith approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete |
| 19 | Removing wooden or A.C.partition including frame work and stack-ing the materials as with all leads, lifts etc. complete. |
| 20 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed / fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 mili metre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetregalvanizedgridshouldbefixedtoreinforcedcementconcreteslab.Thegypsumboardshouldbefixedtogalvanizedirongridwithnecessaryscrews.Theboardsshouldbetapedandfilledfromundersidetogivesmooth,seamlessceiling.Therateshouldincludenecessaryadditionalceilingsectionsandintermediatechannels.Additionalintermediatechannelsshouldbefixedtostraphangersforadditionalsupporttopreventstrappingatevery1200milimetreitemtobecompletedinallrespectincludingnecessarysleevesforductsfinishingofjointscutouts,paintingincludinglabour,material,liftsetc.all complete |
| 21 | Providing and Fixing in position Aluminium Frame work for Partitions, paneling, boxing, soffits with vertical members at not more than 600 mm centers & horizontal members not more than 600 mm centers.with L patti joint , Complete including necessary aditional supports, bracing runner etc. complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) A) Size 50 x 50 x 1.62mm |
| 22 | Providing and Fixing in position Aluminium Frame work for Partitions, paneling, boxing, soffits with vertical members at not more than 600 mm centers & horizontal members not more than 600 mm centers.with L patti joint , Complete including necessary aditional supports, bracing runner etc. complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) B) Size 50 x 25 x 1.62mm |
| 23 | Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) A) 6 mm thk Marine plywood |
| 24 | Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) B) 9mm thk Marine plywood |
| 25 | Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) C) 12 mm thk Marine plywood |
| 26 | Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) D) 19 mm thk Marine plywood |
| 27 | Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) E) 9 mm thk Decorative MDF panelling |
| 28 | Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .(Basic Rate for laminate: Rs.55 per sft.) (Rates excluding GST) |
| 29 | 35mm thk Flush Door both side Laminate - Providing & fixing 35mm thk. Phenol bonded Flush door or Partly Glazed finish with 1.5mm thk. Laminate on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. (Rates excluding GST) |
| 30 | Storages Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides, top, bottom shelves made out of 19mm marine plywood for all inside surfaces 2)6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick block board finish with material & 6mm thk teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces& be finished with melamine polish.4) Finish 1mm thk laminate inside & 1.5mm thk laminate out side, hardwares such as heavy duty hinges, brass body locks (Ebco make) with extra large group key of approved quality, magnetic ball catchers, handles, towerbolt etc. All exposed woodwork to be finished with 3 coats of melamine polish & all internal surface finished with 1 mm thk laminate. The exposed surfaces shall be finished with 1.5 mm thk. laminate of approved shade & colour. All as per detailed drgs and instructions of EIC / Architect (Rates excluding GST) |
| 31 | Assistant Table (size 1500 x 900 x 750 mm) side table (size 1100 x 450 x 750 mm) in Laminate... Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides & bottom in 6 mm thk. Plywood Internal surfaces to be Laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC / Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top & shall be finished with matching Laminate. (Rates excluding GST) |
| 32 | Modular workstations consist of low ht. partition screen, work tops, Pedastal unit ,filing stoarges( only in few cases), key board tray & CPU trolley as specification mentioned below.The profiles of the Aluminium partition frame should be as per the attached sheet and the as per the weight per Rmt mentioned on the sheet.. Work top - 25 mm hk. Pre laminated particle board cut to size & shape as per design & drawings. Edges to be fixed with 2mm thk PVC edge binding of approved make & matching to laminate. Key board tray & CPU Trolley - Each work station shall have PVC moulded key board tray & M. S. powder coated CPU Trolley with castors. Pedastal unit - 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made out of 18 / 16 mm prelaminated board for caracus & 12 mm prelaminated board for drawers. Top drawer to be on roller slides and two lower drawers to be of 3 extension ball bearing slides. Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board and white board. Screen in front of the table to have frosted glass panel above table top. (Rates excluding GST) |
| 33 | EXECUTIVE cabin table (size 2750 x 1200 x 750 mm) side table (size 1500 x 600 x 750 mm) in Veener.. Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides & bottom in 6 mm thk. Plywood Internal surfaces to be veneer with melamine polish. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC /Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposedwoodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top & shall be finished with matching veneer all molding shall be finish in 3 coats of melamine polish. All thetables shall have keyboard drawers to accommodate keyboards & mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock etc. drawings & also shall include CPU unit as shown in the drawings approved by Engineer-in-charge/Architect. No seperate payment shall be made for this. Tables all exposed surface finished with a approved veneer inapproved pattern as per drawings. All exposed surface of side unit to befinished with an approved veneer. Providing & fixing in position side unitmade out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc.as per drawings, finished with approved veneer from outside &French polish from inside. Item to be completed in all respects as perdrawing & instructions from EIC. The item shall include a set of drawer & openable shutters, as per the drawing & details. All shelves, openableshutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With veneer of approved shade & make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer-In-charge & Architect. (Rates excluding GST) |
| 34 | Providing & Arrangemnt of Executive High Back Chair, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery as per SSR. Page No. 359 , sr. no.-1865, Item No. / Ref. No.- 51.40 as per ssr. 2022- 2023 pdf. |
| 35 | Providing & Arrangemnt of Mid Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5- prong/Nylon Base with Leather Upholstery as per SSR. Page No. 359 , sr. no.-1867, Item No. / Ref. No.- 51.42 as per ssr. 2022-2023 pdf. |
| 36 | Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery as per SSR. Page No. 359 , sr. no.-1856, Item No. / Ref. No.- 51.43 as per ssr. 2022-2023 pdf. |
| 37 | Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (kgs): 66 (Kg) Seating Capacity: Five Seat as per SSR. Page No. 368 , sr. no.-1878, Item No. / Ref. No.- 51.53 as per ssr. 2022-2023 pdf. |
| 38 | Palmet / Jamblining (upto 250mm wide).. Providing & fixing in position jamb lining of 19mm thk. plywood & finished as below with wooden moulding, exposed surfaces polished with 3 coats of melamine polish. All complete as per drawing & instructions of Engineer-incharge (Rates excluding GST) |
| 39 | Providing and fixing in position 12mm thick Soft Board paneling on partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per detail drawing, as specified and as directed by Architect/Enginner In Charge.. (Rates excluding GST) |
| 40 | Roller Blinds..\\"Providing and fixing Collinear Window Sahdings from Livin in 3\\"\\"/2\\"\\" vane size having headrail and bottom rail made of aluminium alloy extruded profile, powder coated and provided in standard natural white color. The rolling tube should made up of aluminium alloy from extruded profile of Ø34 mm. The headrail dimensions should be in the range of: H 58mm x 72mm for the larger headrail. The cassette should conseal the working mechanisme rotary-- clutch that raises, lowers and tilts the shade contains and protects shading fabricwhen fully raised. All plastic parts are in white color. Operation options: endless cord loop. Installation to be done by quick release brackets (wall or ceiling). The fabric of this Silhouette Window Shadings should be anti static polyester vanes which have facings between 2 sheers layers (50mm wide) to reduce glare. Sheer layers made of white 100% knit polyester & the selection of colors, textures and opacities from the Livin collection as specified by the architect. The shading to be opeartedby Esayrise mechanism with acontinous cord loop operating option.The FABRIC shall be constructed fromspun - bonded 100% polyester fibre,having Greenguard certified andrecommended for sensitive areas likeclean room condition andlaboratories.all complete as perinstructions of Engineer - in -charge.\\" (Rates excluding GST) |
| 41 | Providing and applying plastic emulsion paint to approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface.(excludingprimercoat) etc. complete. |
| 42 | Providing & fixing glazed partition made out of 8 mm thk clear glass with designs pattern as shown in drawing. Glass should fixed with required size of wooden beading which finished with 3 coats of melamine polish. Rate including cost of glass edge machine polishing in between 2 glass edges touching together (if required) complete all as per the drawing, details & specification & to the satisfaction of Engineer-in-charge. (Rates excluding GST) |
| 43 | Providing and applying plaster/wall punning with plaster of paris (with plaster of parismaterial) in 10 to 13 millimeter thickness to previously plaster edsurface/oronnewlybricksurface(Excludingroughcastplaster)inallpositionincludingpreparingand Finishing the surface scaffolding etc.complete. |
| 44 | Forssted 3m film.. Providing & fixing in position approved make colour & shade frost film on glass complete as per direction of manufacturer & instruction of Engineer - in - Charge. (Rates excluding GST) |
| 45 | Providing and fixing Indian teak wood joists and girders in timber floors of single, double or framed type including scaffolding if necessary, and one coat of primer etc. complete. |
| 46 | Providing and fixing shutter to wall cupboard made from 19mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). |
| 47 | Providing & Fixing 3mm Thick Acrylic Sheet on All Walls. |
| 48 | BASIC TEST OF AGGREGATE. Sieve Analysis test. |
| 49 | BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test. |
| 50 | FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. |
| 51 | BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity,Impact Value Crushing Value test. |
| 52 | BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength and Soundness test. |
| 53 | STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) |
| 54 | STEEL BAR TESTING Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress). |
| 55 | BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength ( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) test. |
| 56 | MORTOR Compressive Strength( Set of 3 Cubes) test. |
| 57 | FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. |
| 58 | MORTOR Compressive Strength( Set of 3 Cubes) test. |
| 59 | FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. |
| 60 | MORTOR Compressive Strength( Set of 3 Cubes) test. |
| 61 | FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. |
| 62 | PAINT / THERMO-PLASTIC PAINT Reflectance & yellowness index Test. |
| 63 | PAINT / THERMO-PLASTIC PAINT Flowability (Percentage residue) Test. |
| 64 | PAINT / THERMO-PLASTIC PAINT Softening Point (Ring & ball method) Test. |
| 65 | PAINT / THERMO-PLASTIC PAINT Drying Time Test. |
| 66 | CERAMIC TILES / VITRIFIED TILES Water Absorption, Moduls of Rapture (Set of 6 Tiles) test. Please Enable Macros to View BoQ information |
