|
| 1 | Estimate No. 1 - 200 KWP |
| 2 | Supplying, installing, testing and commissioning of 100 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (550 Wp X 182 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.c. ACDB/ DCDB, MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG |
| 3 | Additional MSEDCL Charges for Net Metering System at proposed for PWS Scheme including Solar Net Meter, Panel Cables, Earthing etc complete |
| 4 | Supply and commissioning of IOT based self powered water tank level controller and monitoring with five year CMC |
| 5 | Design supply and commissioning of IOT/Commander as per specification compatible to Item no. 4 |
| 6 | Providing,installing testing and commissioning of in line battery operated ultrasonic bulk type water meters ISO 4064 with built in data logger and GSM/GPRS modem for transfer of data communication to remote central computer as per working on following conditions and specifications.The meter shall be suitable for 50oC and provided with IP 68 protection class with complete immersion of water.The meter shall have battery life of min.10 years should be able to detect the reverse flow volume and tampering. The accuracy of the meter shall be +/- 1 % of measured value including 36 months guarantee etc complete.( With Simcard and its charges,valid for 36 months) 300 mm |
| 7 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking andspreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259)Lift 0 to 1.5M |
| 8 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the areaand lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Lift 0 to 1.5M |
| 9 | Providing and laying in situ Cement Concrete M-15 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags/cum) M-150 |
| 10 | Providing and laying in situ Cement Concrete of trap/granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)a) In RCC M-200 |
| 11 | Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire), (Bd-F- 17/306)b) TorSteel |
| 12 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by Engineer- in charge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted/bolted/welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-8/278) |
| 13 | For structure Providing and applying material & labour for hot dip galv anizing of above structure including transport for galvanizing as per R.C |
| 14 | Providing and Fixing mild steel grill gate as per the detailed drawing including hinges locking arrangement and painting in three quotes of oil paint of approved colour and shade etc complete (Weight 18 kg to 20 kg per Sq.m.) Spec. No. As directed by Engineer incharge (PWD CIVIL DSR 2022-23 BDW 6A-23.09 Page Number-174) |
| 15 | Providing and erecting chain link fencing 1.6 mtr height with Gl chain link of size 50 X 50 mm 8 swg thick and fixed 75 mm above GL vertical MS angle of 40 X 40 x 6 mm size including excavating pits for foundation and embedded in co block 1:4:8 mix of half size 450 X 450 X 670 mm at 1.75m centre to centre with iron bar 16 mm dia as a hold fast including welding link with angle frame at 30 cm centre to centre with nuts and bolts and horizontal MS angle at top and bottom of 25 x 25 mm size and vertical MS flat (PWD DSR 2022- 23 BDW-46.39 Page No. 298) |
| 16 | Supplying and installation of Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 5 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area). |
| 17 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 18 | Site Cleaning Charges (Rent For JCB) |
| 19 | Miscellaneous Charges ( site cleaning charges, piping for panel cleaning , water sprinklers, and required motor , wire, switch,additional required accesories, etc complete.) |
| 20 | Item No 1 - Excavation for foundatio / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, manual dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete. (A) Soil |
| 21 | (B) H.M. |
| 22 | Item No 2 -Providing & laying in situ M-150 grade of CC of trap/ granite/quartzite/ gneiss metal for foundation & bedding including dewatering formwork compacting & curing finishing comp |
| 23 | Item No 3- Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (A) Foundation Footing RCC M-200 |
| 24 | (B) Column RCC M-200 |
| 25 | (C ) Beam & Lintel |
| 26 | (D) Roof Slab |
| 27 | (E) Chajja |
| 28 | Item No 4 - Providing and fixing in position steel bar reinforcement in position steel bar reinforcement of various diameters for R.C.C. Piles, caps, footings, foundatio-ns, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copints, fins, drawings, and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. |
| 29 | Item No-5 Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. |
| 30 | Item No.6 - Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Comp. For foundation and plinth |
| 31 | For Superstructure |
| 32 | Item No 7-Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steelfixtures and fastenings and handles on both sides and finishing with oilpainting 3 coats complete. |
| 33 | Item No 8 - Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain obscured glass pane and of approved type and quality and fixtures and fastenings, without teak wood boxing and architraves and finishing with oil painting two coats complete. |
| 34 | Item No 9- Providing internal cement plaster 12 mm thick in a single coats in cement mortar 1:3without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. |
| 35 | Item No 10 - Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonary surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in ortion 1:1 1/ 2:3 including scaffolding and fourteen days curing complete. |
| 36 | Item No 11 -Rough shahabad flooring 25 mm to 30 MM |
| 37 | Item No 12 - Providing and applying washable distemper of approved colour and shade to old / new surfaces including scaffolding, preparing the surface to receive the printing coat and finishing coat etc. complete. |
| 38 | Item No 13- Providing and applying waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary and preparing the surface curing etc. complete. |
| 39 | Desiging, supplying, installing, commissioning & testing of CCTV IR water proof camera suitable for upto 100ft. with control key board, DVR, Hard Disk,cables,UPT trans receivers etc.complete withnot less than following specifications 1.Fournumbersof IPCamera with night vision functionality with range up to 30meters. Camera construction shall be suitable for weather proof outdoor installation. 2.Eight Channe DVR with metal body consturction, having body consturction, having software features of motion detect recording. 3. 3.5 inch 2 GB HDD 4. 8 port POE Switch 5. 32 inch LED Screen, Keyboard & mouse. |
| 40 | Supplying, installing, testing and commissioning solar street lightpole comprising of 12W x 2 nos. LED fittings, 12V min. 100Ahmaintenance free lithium battery, min. 120Wp SPV module, MSpowder coated battery box weather proof, mounted on 75/80 mmdia. B-Grade GI pole of 6 m. height along with brackets, foundation,earthling and necessary accessories complete. Specification no. ESDSOL-STL |
| 41 | Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. |
| 42 | Estimate No. 2 - 12.5 KWP |
| 43 | Supplying, installing, testing and commissioning of 12.5 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (550 Wp X 23 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.c. ACDB/ DCDB, MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG |
| 44 | Additional MSEDCL Charges for Net Metering System at proposed for PWS Scheme including Solar Net Meter, Panel Cables, Earthing etc complete |
| 45 | Providing and laying in situ Cement Concrete of trap/granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) |
| 46 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by Engineer- in charge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted/bolted/welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-8/278) |
| 47 | For structure Providing and applying material & labour for hot dip galv anizing of above structure including transport for galvanizing as per R.C |
| 48 | Supplying and installation of Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 5 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area). |
| 49 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 50 | Miscellaneous Charges ( site cleaning charges, piping for panel cleaning , water sprinklers, and required motor , wire, switch,additional required accesories, etc complete.) Please Enable Macros to View BoQ information |
