|
| 1 | Sub Estimate |
| 2 | 1. Designing, providing, erecting & commissioning of Main L T Panel fabricated with 16 SWG CRCA sheet base wall mounted with supporting angles, painted with powder coating/ epoxy paint of required shade, incomer side consist of L&T make 250A, 25KA, 4P, MCCB with RHOM-1 No, Control MCB, 6A,SP,10KA- 3 Nos, L&T make Load Manager- 01 No, Newtek make CTs, 250/5A, CL-1, 10VA – 4 Nos, RYB lamps and Outgoing side consist of L&T make 100A, 4P, MCCB, 10KA ROHM – 10 Nos, L&T make 63A, 4P, MCB, 10KA- 2 Nos having aluminum bus bar with epoxy insulator, degree of protection-IP-55, control wiring 1.5 Sq.mm and CT wiring by 2.5 Sq.mm Flexible copper wire. |
| 3 | 2. LT Cables (Aluminum) (CB-LT/AL)2.1. Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 4 | 3. Cable Enclosures (CB-CE)3.1 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. |
| 5 | 3.2. Supplying & laying (including excavation) reinforced cement concrete pipe of NP-2 class of 150 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 6 | 4. Supplying, installing, testing and commissioning of 30V/100 AH VRLA Battery Bank consisting of 15 Nos. Cells @ 1.75ECV with standard accessories like racks/stands, inter-cell connectors, etc. |
| 7 | 5. Supplying, installing, testing and commissioning of Battery Charger: 30V/25A Float Cum Boost Charger (FCBC) with Inbuild DCDB - [ I/C - 63A -1 nos. & O/G - MCB-10A-2P-DC-2 Nos. MCB-16A-2P- DC-6 Nos, 25A MCB- 2nos, 32A - MCB - 2nos]. (NS swift), 3 Phase 3/4 Wire, Full Wave, Full Controlled, Suitable for 30V- 100AH VRLA Battery of 15 Cells as per enclosed TSP. [33.75V in Float mode & 34.5V in Boost mode] |
| 8 | 6. Repairing of the 375 KVAR Static Var Generator panel (Insta sine make)with the replacement of necessary components such as 1) Wire Harness for 125 KVAR SCG 2) 4 inch AC Fan 3) DC Cooling fans ( 4 Nos ) 4) Main ControlCard 3L Module ( repairing charges ) 5) 7 inch TFT Touch Screen Display.6) Display Card ( repairing Charges ) 7) IGBT Driver Card 8) LCL Capacitor 40uF,3 Ph 9) Semifuse 200 A 10 ) Backlight Strip 11) Main Contactor Link Set for Main Contactor 150 A 12) Aux Contactor including Retro- fitting charges ,packing,shipping,and forwarding ( to and fro ) and recommissioning charges of 375 KVAR Static Var Generator |
| 9 | 7. Accessories7.1 Supplying and erecting copper strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP. |
| 10 | 8. Plate, Pipe type Earthing (EA-EP)8.1. Supplying, installing and testing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill ground ehancing compound complete with all accesories of copper materials & recording the results as per specification no EA-EP/EF |
| 11 | 9. Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means |
| 12 | 10. Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 13 | 11. Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete.11.1. (Cement 5.90 bags / cum) Spec. No. - Bd E /1 Page No. 287 and B-7, Page No. 3811.1.1. 2) In PCC M-150 |
| 14 | 12. Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 15 | 13. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 16 | 14. Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Nos. : As directed by Engineer-in-charge. |
| 17 | 15. Providing and fixing 22 B.W.G. plain FRP sheets on top of weather shed, including scaffolding, fixing by means of nut and bolts or as directed etc. complete. (Brackets of 70 x 45 mm to be paid separately) |
| 18 | 16. Providing, erecting GI steel structure for Isolator/CT/PT/LA/VCB etc. complete including entire design, fabrication of angles, plates, flats, nut bolts with spring washers, anchor bolts, D-shackles hooks, including shearing bending, gas cutting, punching, drilling, etc., strengthening of the steel members with hot deep process including the galvanized quoting for approximately 90 micros etc. complete. |
| 19 | 17. Providing and casting in situ Cement Concrete of trap/ granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineerin- charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)17.1. For all types of Columns17.1.1. 3) In RCC M-250 |
| 20 | 18. Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 21 | 19. Credit for Dismantled Material19.1. H.G. / M.S. / G.I. Materials / Poles etc. |
| 22 | 20. Rebate for old dismantled battery charger & Batteries at Raw Water Works Please Enable Macros to View BoQ information |
