|
| 1 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 2 | Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 (Sand Filling) Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 3 | Providing concrete (P.C.C grade M-10) for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 4 | RCC M25 Providing concrete for Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications Clauses 802,803,1202&1203 Sr. No. 13.1 Ref. No. 800. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 5 | Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 6 | Reinforced cement concrete grade M 25 in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 7 | Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 8 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 9 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 10 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 11 | Providing pressure relief pipes 100 mm dia in bottom slab of box cell on a filter media base of 500 mm x 500 mm as per drawing and technical specification Clause 1205.5.7. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 12 | Providing and laying reinforced cement concrete grade M 25 in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 13 | Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 14 | Drainage spouts complete as per drawing and technical specifications Clause 1209. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 15 | P.C.C. M 15 ordinary grade (1:2.5:5) levelling course below approach slab complete as per drawing and technical specifications Clauses 800 and 1211. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 16 | Reinforced Cement Concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 17 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications Clause 800 and 1206.3 Sr No. 13.5 Ref No. 800 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 18 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density. Sr No. 4.1 Ref No. 401. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 19 | Providing, laying, spreading and compacting stone aggregates of 45-63 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.Sr No. 4.8 Ref No. 405/2. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 20 | Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.Sr No. 4.8 Ref No. 405/2. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 21 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 Sr No. 5.1 Ref No. 502. Including all taxes, material, T&P, Machinary, royalty, Bitumen, labour cess complete. Excluding GST as per direction of E/I. |
| 22 | Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. Sr No. 5.2 Ref No. 503 Including all taxes, material, T&P, Machinary, royalty, Bitumen, labour cess complete. Excluding GST as per direction of E/I. |
| 23 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Sr no. 5.9 Ref No. 508. Including all taxes, material, T&P, Machinary, royalty, Bitumen, labour cess complete. Excluding GST as per direction of E/I. |
| 24 | Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 .Sr no. 5.12 Ref No. 510 Including all taxes, material, T&P, Machinary, royalty, Bitumen, labour cess complete. Excluding GST as per direction of E/I. |
| 25 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 25 kg each complete as per drawing and Technical specification Sr No. 15.4 Ref No. 2504 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 26 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications Clause 1302 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 27 | Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 28 | Providing and laying P.C.C grade M-10 curtain walls complete as per drawing and technical specification Clause 1304. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 29 | Retro-reflectorised Traffic sign as per IRC-67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to theground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm,60cm below ground level as per approved drawing.The Retro reflective sheeting shall be tested fracrtificate of having thesheeting tested for coefficient of retroreflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specularglos sand fungus resistance, 3years outdoor weathering and it shaving passed these testsshall beobtained from International/ Government Laboratory/ Institute by the manufacturerof the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial ac celerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer /Client, if so desires,could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends , letters , numerals and borders etc should be as per MoRTH specification No 801.3.7 . P xi) (x) 30x90 cm (Left/Right) Object Hazard as per SOR No. 22.20 New Item. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 30 | Supply and fixing of Linear Delineator System (LDS) panels made of Micro Prismatic Retro Reflective sheeting type XI duly laminated on aluminium foil to a unic corrugated shape to provide retro reflection across wide range of obeservations and external angle. Each LDS pannel should be of nominal length of 33 inch and each ridge shale be approximately 0.34 in high, each LDS pannel is to be firmly fix on exsting concrete/brick work with 16 No fasner/screw as per Technical specification IRC:79-2019. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 31 | Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i) (Beding of Pipe). Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 32 | Supply and fixing of 1000 mm dia NP3 type Hume Pipe S&S in position including labour and T&P etc. required for proper completion of work. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 33 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 34 | Brick on edge pavement with straight over burnt brick on parties with bricks, laid dry joints filled with fine sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8\\") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work.Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 35 | Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification.Sr No. 2.6 Ref No.202 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 36 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical SpecificationSr No. 2.5 Ref No.202. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. |
| 37 | Removing all types of Hume pipes and stacking within a lead of 1000mm including Earthwork and Dismantling of Masonry Works as per Technical Specification Sr No. 2.13 Ref No.202. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. Please Enable Macros to View BoQ information |
