|
| 1 | Surface dressing n exc 15 cm deep and getting out in any type of soil complete all as specified and directed. |
| 2 | Excavation in trenches n exc 1.50 mtr wide and n exc 1.50 mtr depth, for foundation etc n exc 10Sqm on plan and getting out in any type of soil complete all as specified & directed. |
| 3 | Excavating over areas, n exc 1.50 m deep and getting out in any type of soil complete all as specified and directed. |
| 4 | Returning, filling in, including spreading levelling watering and well ramming in layers n exc 25cm as in any type of soil complete all as specified and directed. |
| 5 | Removing excavated material (soil) to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 6 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, sub base & mass concrete complete all as specified and directed. |
| 7 | M&L for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 8 | M&L for RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate in foundation, including rafts, footings, beams, plinth beams; bases for columns; etc; basement slabs, under-remed piles and mass concrete complete all as specified and directed. |
| 9 | M&L for RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in cloumns, pillars, piers, posts and struts complete all as specified and directed. |
| 10 | M & L for RCC (nominal mix) 1:2:4 Type B-1 using 20mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished concrete surfaces complete all as specified and directed. |
| 12 | Formwork to sides of pillars, piers, columns, square, rectangular, polygonal, circular on plan rough finished surfaces of concrete complete all as specified and directed. |
| 13 | Formwork to sides and sofits of floor or roof beams, beam haunching, bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc rough finished surfaces of concrete complete all as specified and directed. |
| 14 | S&F MS TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia confirming to Fe 500 or Fe 550 complete all as specified and directed. |
| 15 | All as per item No. 14 above but 5mm dia and over upto and including 10mm dia in stirrups spacers and binder. |
| 16 | M & L for brick work with sub class old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 17 | M & L for Brick work old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 18 | M&L for 10mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for 15mm thick rendering on fair faces of brick surfaces in CM (1:4) finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) soliddoor/window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter & fixing with stainless steel / Aluminium butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction.(Note: stainless steel/Aluminium butt hinges and necessary S S /Aluminium screws shall be paid separately) |
| 22 | S & F Anodised aluminium powder coated ( minimum 50 micron thickness) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 23 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approvedmake conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 24 | S & F 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5Sqm in each pane complete all as specified and directed. |
| 25 | Supply and fix 100 mm size, butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodized and fixed type C-21 complete all as directed. |
| 26 | S & F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 27 | S&F aluminium anodised barrel tower bolts 150mm long of extruded section complete all as specified and directed. |
| 28 | S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 29 | M&L for moorum/red bajri filling in floors orpavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 30 | M&L for 75 mm thick PCC 1:3:6, type C-2, (using 40 mm graded stone aggregate) as in plinth protection etc. & finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L 40mm thick PCC 1:2:4 type B-0, (using12.5mm stone graded agg) as in floor finished even and rough complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer and avg 2 mm thick wall care putty complete all as specified and directed. |
| 33 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm on new surfaces complete all as specified and directed. |
| 34 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. |
| 35 | M&L for Glazed Coloured Ceramic Tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado / skirting / risers to steps etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4. complete all as specified and directed. |
| 36 | S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover, jet spray etc complete all as specified and directed. |
| 37 | S&F Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc. complete all as specified and directed. |
| 38 | S & F 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, pull or push type including brackets complete all as specified and directed . |
| 39 | S&F 15 mm dia fancy type CP stop valves/angle cock, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 40 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or as in weep hole complete all as specified and directed. |
| 41 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 42 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 43 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 44 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 45 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 46 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 47 | S&F PVC (SWR) \\"P\\" trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 48 | S & F PVC connections 15mm size with PTMT nuts of length 450mm long complete all as specified and directed. |
| 49 | S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed |
| 50 | S&F 20mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 51 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 52 | S&F 15mm fancy type CP dia bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 53 | S&F Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed. |
| 54 | S & F PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified. |
| 55 | S&F 15mm fancy types Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 56 | S&F 32mm bore brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. |
| 57 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 58 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 59 | S&F Brass chromium plated /SS Tubular towel rail, 20mm dia, D type, 60cm long between flanges and including Chromium plated brass screws and wooden /plastic cleats complete all as specified and directed. |
| 60 | S&F Chromium Plated Grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc complete all as specified and directed. |
| 61 | S&F Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections complete all as specified and directed. |
| 62 | S&F 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 63 | S&F 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified & directed. |
| 64 | S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 65 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and facia (as per existing design) fixed with self tapping screws complete all as specified and directed. |
| 66 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified. |
| 67 | S & F mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified. |
| 68 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 69 | S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 70 | S&F Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore dia of pipe complete all as specified and directed. |
| 71 | M&L for walling of random rubble masonary, uncoused, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed. |
| 72 | M&L PCC (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregate) as in benching, bed plates, copings and the like including necessary formwork, complete all as specified and directed. |
| 73 | M&L pre cast cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar 1:6 in bond stones for stone masonry and the like including necessary formwork, complete all as specified and directed. |
| 74 | M&L for flush pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed. |
| 75 | M&L for boulder filling dry hand packed tightly as in back of wall complete all as specified and directed. |
| 76 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all specified and directed. |
| 77 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation of post hole complete all as specified and directed. |
| 78 | S & F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks, post and struts and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars , stiffeners , gusset plates, Fe-410- W(Gde E-250) quality B etc. complete all as specified and directed. |
| 79 | S&F Welded steel wire fabric (mesh) Weight N. exc 4 kg per square metre any size supplied and fixed complete to wood or steel members complete all as specified and Directed |
| 80 | M&L for applying two coats of synthetic enamel paint on new steel surface over a coat red oxide primer over 10 cm width or girth including preparation of surface complete all as specified and directed. |
| 81 | S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete and including materials and labours for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and directed. |
| 82 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed. |
| 83 | Excavating over areas, exc 1.5 m deep but n exc 3.00 m deep and getting out in any type of soil complete all as specified and directed. |
| 84 | Excavating over areas, exc 3.0m deep but n exc 4.5 m deep and getting out in any type of soil complete all as specified and directed. |
| 85 | M & L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed. |
| 86 | M&L for 150mm dia reinforced cement concrete pipe CL NP-2 laid and joionted complete with collars all as specified. |
| 87 | M&L PCC 1:4:8 type D-2, 40mm graded agg as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm bore complete all as specified and directed. |
| 88 | M&L for rendering 15mm thick in CM 1:4 in two layers on fair faces of brick work or concrete surfaces 10mm first coat and 5mm second coat finishing the surfaces even and smooth with using integral water proofing compound complete all as specified and directed. (WPC shall be measured and paid separately). |
| 89 | M&L for brick bat loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed. |
| 90 | Supply only integral water proofing compound complete all as specified. |
| 91 | M&L for Precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate), in cover slabs of manholes, open drains inclusive of form work set in CM (1:4) complete all as specified. (Reinforcement shall be measured and paid separately) |
| 92 | M&L for RCC nominal mix 1:2:4 (using 20 mm graded stone aggregate) in Walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footings including attached pilaster and buttresses cpmplete all as specified and directed. |
| 93 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to battercomplete all as specified and directed. |
| 94 | S&F MS TMT bars 6-8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia confirming to Fe 500 or Fe 550 complete all as specified and directed. |
| 95 | M&L PCC 1:2:4 type B-2 using 40mm graded stone aggregte as in surface channels & drain including necessary form work complete all as specified and directed. |
| 96 | M&L for brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in built in CM 1:6 complete all as specified and directed. |
| 97 | S&F PVC (SWR) 110mm pipes single socketed in any length as in vent pipe complete all as specified & directed. |
| 98 | S&F PVC (SWR) 110mm vent cowl complete all as specified & directed. |
| 99 | S&F Mild steel round bars 10mm dia and over as in rungs, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified & directed. Please Enable Macros to View BoQ information |
| 100 | S&F Mild steel round bars 10mm dia and over as in rungs, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified & directed. Please Enable Macros to View BoQ information |
