|
| 1 | Demolition of brick/stone masonry built in cement mortar all as specified. |
| 2 | M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified |
| 3 | As item no.2 above but Except bricks |
| 4 | Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed. |
| 5 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 6 | M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 7 | M&L for providing reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in cover slabs. complete all as directed by Engr-in-charge. |
| 8 | M & L 15 mm thick cement plaster on brick wall in cement morat 1:4 and plastered surfaces shall be even and smooth without using extra cement complete. |
| 9 | M & L 15 mm thick cement plaster on brick wall in cement morat 1:6 and plastered surfaces shall be even and smooth without using extra cement complete. |
| 10 | M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. complete all as specified and directed. |
| 11 | M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls. |
| 12 | Demolition of cement concrete (unreinforced) of any description and in any position not ohterwise specifically provided for .complete all as sspecified |
| 13 | M/L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base. |
| 14 | M&L for laying machine pressed precast concrete interlocking reflective coloured (Glossy Finish) pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming incl demolition of old tiles or blocks etc.complete all as specified. |
| 15 | M& L Chequared Cement Concrete (Glossy finish) rubber moulded Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 incl demolition of old tiles or blocks etc.complete all as specified. |
| 16 | M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in bed blocks/coping/ edging all as specified and directed. |
| 17 | M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg.) as in plinth protection 75 mm thick finished top surface even and smooth with out using extra cement |
| 18 | M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed. |
| 19 | M&L for cement conceret 1:3:6 Type C-2 Using 40 mm graded stone aggregate as in surface channel and drain bed. |
| 20 | Extra for forming fair finished drain or channel 30 cm inner girth or more in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 21 | M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified |
| 22 | M/L PCC type B1 1:2:4 (20 mm Gr. Agg ) 50mm thick as in leveling course for floor finishes etc all as specified and as directed. |
| 23 | Finishing surface of concrete roads, pavements etc by belting/brooming complete all as specified and directed. |
| 24 | M & L for forming 12 mm thick expansion joints 150 mm deep, filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed. |
| 25 | M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 26 | Demolition of and breaking up drain pipes (salt glazed ware) 450 mm dia set in cement mortor complete all as specified. |
| 27 | All as item No.26 above but for internal dia of pipe300mm. |
| 28 | All as item No.26 above but for internal dia of pipe 200mm. |
| 29 | M&L for 450 mm bore Reinfirced concrete pipes class NP3, laid and jointed complete with collars laid in trenches and jointed all as specified. |
| 30 | All as item No.29 above but for 300 mm internal dia of pipe. |
| 31 | All as item No. 29 above but for 200 mm internal dia of pipe. |
| 32 | M& L for PCC 1:4:8 type C-2, (using 40mm graded stone aggregate) as in bed of drain for 450mm bore pipe incl packing under and completely surrounding pipes with concrete after they are laid and tested for 300mm dia pipes complete all as specified and ditected by Engr-in-Charge. |
| 33 | All as item No. 32 above but for 300 mm dia RCC pipe. |
| 34 | All as item No. 32 above but for 200 mm dia RCC pipe. |
| 35 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified. |
| 36 | M&L for machine cut kota stone slab flooring 20-22 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing to receive mirror finish over 20 mm th screed bed in CM 1:6 complete all as specified and as directed. |
| 37 | Ditto all as above item ser No 36 but on skirting over 10 mm th backing coat in CM 1:4 complete. |
| 38 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete. |
| 39 | M&L Machine cut kadappa stone slab 20-25 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match. |
| 40 | M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in sub base for leveling course.complete all as specified. |
| 41 | Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises. |
| 42 | M & L Glazed ceramic coloured tiles 300 mm x 450 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete. |
| 43 | M&L for vitrified coloured tiles 8 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete |
| 44 | All as per item No 43 but on skirting over 10 mm th rendering in CM 1:4 complete. |
| 45 | M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. |
| 46 | M & L for 75 mm thk Cement conc type C-2, 1:3:6 (40 mm grade Agg) as in plinth protection finished even and fair . |
| 47 | Dismanteling fencing wire mesh , any type |
| 48 | Dismanteling post, struts , (wood , steel or Rcc) any section incl. taking out embede portion in concrete or brickwork and making disturbed portion good |
| 49 | Excavation in post holes or similer holes each nexc. 0.5 cum getting out returning filling in and ramming earth around in layers n. exc 25 cm,watering , and removing surplus soils to a distence nexc 50m and making good surface in hard soils,complete all as specified. |
| 50 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post. |
| 51 | S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size. |
| 52 | S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank. |
| 53 | Supply only chain link MS galvanised fencing any size or type and any type of strands, rails, straining bolts etc incle provn of binding wire all complete |
| 54 | Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire |
| 55 | M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips. |
| 56 | S&F GI two strand, steel barbed wire 2.24mm dia, narbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc. All as specified (Each line of wire to be measured.) |
| 57 | M&L two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth |
| 58 | M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth |
| 59 | Dismantling Plain or corrugated steel (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed. |
| 60 | Dismantling wrought iron or mild steel work of any description not otherwise provided for . |
| 61 | S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) |
| 62 | M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc. |
| 63 | S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete. |
| 64 | All as per item No.63 above above but plain sheet fix in valley gutter / ridge/view cutter etc. |
| 65 | M & L Framed work as in doors or gates of angle or other section, hollow section with gusset plates, rail, braces, etcof Fe 290 Gde E 165 complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
