|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair/Maintenance of pumping system, Pipe lines, control valves and switchgear installed at CHNC under GE Utilities Udhampur Contract No: GE/U-08/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil. Complete all as specified and directed by Engr-in-Charge. |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested complete, all as specified and directed by Engineer-in-Charge |
| 4 | Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete, all as specified and directed by Engineer-in-Charge |
| 5 | S & F in repair/replacement of open well pumping set suitable for electric driven 415V, AC, 50 Hz, 3 Pole suitable for 65/50 mm dia sucton /delivery complete of capacity 5HP/3.7 KW, 1, steel body, discharge 570 LPM at 30 Mtr Head, including provn of suitabled size connecting piece/distance piece suitable to connect the pump with pipe & necessary arrangement for welding/fixing with pump end including copper conductor cable 6sqmm 3core 50mtr with DOL Starter complete all as specified and directed by Engr-in-Charge. |
| 6 | Taking up or down old unseviceable pipe of size 150 mm dia any type including all fittings complete all as specified and directed by Engr in Charge |
| 7 | Description all as per Ser item No 5.00 but of dia 100 mm any type including all fittings complete all as specified and directed by Engr in Charge. |
| 8 | Description all as per Ser item No 5.00 but of dia 80 mm any type including all fittings complete all as specified and directed by Engr in charge |
| 9 | Description all as per Ser item No 5.00 but of dia 50 mm any type including all fittings complete all as specified and directed by Engrin charge |
| 10 | Description all as per Ser item No 5.00 but of dia 40 mm any type including all fittings complete all as specified and directed by Engrin charge . |
| 11 | Description all as per Ser item No 5.00 but of dia 25 mm any type including all fittings complete all as specified and directed by Engrin charge . |
| 12 | Description all as per Ser item No 5.00 but of dia 20 mm any type including all fittings complete all as specified and directed by Engrin charge . |
| 13 | Material & labour for centrifugally Cast (Spun) ductile iron pressure pipes with socket & spigot ends confirming to IS: 8329/2000 for water supply lines (external works) in standard lengths classification K9 suitable for Push-on-joint (Rubber Gasket D jointing) with cement mortar lining inside the pipes and outside zinc coating as per IS: 8329/2000, laid in trenches complete all as specified, of 150mm bores:- |
| 14 | Material & labour for centrifugally Cast (Spun) ductile iron pressure pipes with socket & spigot ends confirming to IS: 8329/2000 for water supply lines (external works) in standard lengths classification K9 suitable for Push-on-joint (Rubber Gasket D jointing) with cement mortar lining inside the pipes and outside zinc coating as per IS: 8329/2000, laid in trenches complete all as specified, of 80mm bores:- |
| 15 | Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 16 | Supply & fixing GI pipes of size 100 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 17 | Supply & fixing GI pipes of size 80 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply & fixing GI pipes of size 50 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 19 | Supply & fixing GI pipes of size 40 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 20 | Supply & fixing GI pipes of size 25 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 21 | Supply & fixing GI pipes of size 20 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 22 | Un plasticized (UPVC) class-III pipes and fittings of pressure rating 6 Kgs / cm2 conforming to IS: 4985 including jointing and laid in trenches complete, of outer dia150/160 mm bore with fittings complete all as specified and directed by Engr-in-Charge. |
| 23 | Un plasticized (UPVC) class-III pipes and fittings of pressure rating 6 Kgs / cm2 conforming to IS: 4985 including jointing and laid in trenches complete, of outer dia 100/110 mm bore with fittings complete all as specified and directed by Engr-in-Charge. |
| 24 | Un plasticized (UPVC) class-III pipes and fittings of pressure rating 6 Kgs / cm2 conforming to IS: 4985 including jointing and laid in trenches complete, of outer dia 75 mm bore with fittings complete all as specified and directed by Engr-in-Charge. |
| 25 | D.I specials of Class K-12 as per IS: 9523 for pipes upto 150mm bore complete all as specified and directed by Engr-in-Charge. |
| 26 | Rubber gasket SBR (Tyton) joint for Spigot and Socket pipes and fittings complete all as specified, for 80mm to 150mm dia |
| 27 | Lead joint for Spigot and Socket pipes and fittings complete all as specified, for 80 mm bore |
| 28 | Lead joint for Spigot and Socket pipes and fittings complete all as specified, for 100 mm bore |
| 29 | S&F of Gun-metal, globe or gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge. |
| 30 | Description all as per ser item No 28.00 here-in-befoe but upto 40 mm bore. |
| 31 | Description all as per ser item No 28.00 here-in-befoebut upto 25 mm bore. |
| 32 | Description all as per ser item No 28.00 here-in-befoebut upto 20 mm bore. |
| 33 | Description all as per ser item No 28.00 here-in-befoe but upto 15 mm bore. |
| 34 | Supply and fixing in replacement of cast iron sluice valve of size 200 mm (PN 1.6) (ISI Marked IS -14846) with iron wheel head, both end flanged, stainless steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv complete all as specified and directed by Engr-in-Charge. |
| 35 | Description all as per ser item No 33.00 here-in-befoe but size 150 mm dia |
| 36 | Description all as per ser item No 33.00 here-in-befoe but size 100 mm dia |
| 37 | Description all as per ser item No 33.00 here-in-befoe but size 80 mm dia |
| 38 | Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 39 | Stem bush bronze |
| 40 | Gland flange cast iron |
| 41 | Stud/Bolt carbon steel |
| 42 | Stem nut/chaknut |
| 43 | Stem Stain less steel |
| 44 | Decoupling, disconnecting sluice valve of size 100 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 45 | Stem bush bronze |
| 46 | Gland flange cast iron |
| 47 | Stud/Bolt carbon steel |
| 48 | Stem nut/chaknut |
| 49 | Stem Stain less steel |
| 50 | Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore. Complete all as specified and directed. |
| 51 | Supply and fix Nut bolt M-16 (50mm length) & M-20 (75mm length) with 02 (each 5mm thick) Nos washer at each set. |
| 52 | Supply and fixing leather gasket including replacement old UNSV gasket for 150 mm complete all as specified and directed by Engr-in-Charge. |
| 53 | Description all as per ser item No 41.00 here-in-befoe but of size 80/100 mm |
| 54 | Supply and fixing in replacement of cast iron non return valve, conforming to IS-5312, suitable for 100 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv complete all as specified and directed by Engr-in-Charge. |
| 55 | Description all as per ser item No 43.00 here-in-befoe but of size 80 mm dia |
| 56 | M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pole & stay, including demolition of old one complete as specified and directed. |
| 58 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg. |
| 59 | Material & labour for electromagnetic flowmeter for water softening plant with signal converter with gapichal led display to operate 250VAC .4-20mA with IOT Device,flange type to measure the flow of liquid at maximum temp 180 degree Celsius, DN 100 complete allas specified and directed |
| 60 | Material & Labour for soft pig lead, uniform quality ,free from impurities for jointing of pipes complete all as specified and as directed. |
| 61 | Material & Labour for spunyarn for jointing of pipes ,complete all as specified and as directed. |
| 62 | Material and labour for fabrication of MS sheets ,angle iron in replacement of old pit cover with necessary welding work and one coat of red oxide primer to the welded works and painted with black enamel paint complete all as specified and directed by Engr -in - Charge. |
| 63 | Supplying, fixing, testing and commissioning of Non-clog type Submersible single stage pump with bronze impellar, SS shaft suitable for solids handling upto 40 mm size, coupled to submersible including electric motor, , pump capacity 7.5Lps (450 lpm) at 10 m head of capacity 3HP with 10sqmm 6 Core copper conductor cable min 20 Mtr lenght complete all as specified and as directed. |
| 64 | S& F in replacement of pop up sprinklers having radious of throw 10-15meters andf flow minimum 1.2 LPS at an operative pressure 04- to 6 Kg/Cm.The sprinkler shall be impact driven rotatory with provision for adjusting at any degree of rotating having 01 inlet 20mm pop up stoke,sellf flushing with pop up shield made of virigin grade engineering, plastic body , sprinklewr shall be non corrodible, heavy uty coimplete all as specified and directed by Engr- in Charge.Make : Rain bird/Getech/Globe. |
| 65 | Supply and fixing for prepration of header by MS ERW pipe of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (02x 150 mm ) from pump side and 04 outlets from distribution side MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer all as specified and as directed. |
| 66 | M&L for spray painting of pump and motor, frame of capacity upto 30HP including surface preparation by scrapping with hamery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make to the satisfaction all as specified and as directed by Engr-in-charge. |
| 67 | M&L for writing the description about the machinery installed in different instalations eg Cap, discharge,MES No,Year of installation and head of the machinery on the wall made out of ACP sheet of suitable size as sample approved by the Engr- in Charge in front of the pump motor with fixing in wall with suitable nut and bolts all as specfied and directed by Engr in Charge. |
| 68 | Supply and laying in replacement of synthetic rubber insulated mats 10 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006,( superseding IS 5424) suitable for electrical shock safety of sizes 2mx1m |
| 69 | Supply and fix Gland packing type 3 of size 8 mm made of asbustus grip with silicon complete all as specified and as directed by Engr-in-Charge |
| 70 | M&L in replacement of PVC insulated heavy duty industrial cables three core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 16 sqmm inculding taking down existing old unserviceable cable of complete all as directed by Engr -in-charge. |
| 71 | Description all as per ser item No 59.00 here-in-befoe but of size 10 Sqmm 3 core |
| 72 | Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temp 30 to 120 degree celsious drop point 174 degree celsious, colourlight fawn complete all as specified and as directed by Engr-in-charge. Make: Servo ( IOC)/Bhart petrolium/Castrol or equivalent make approved by E-in-C's Branch. |
| 73 | M&L for copper thimble suitable for 50/35 Sqmm single core copper cable including taking down the existing unserviceable one complete, all as specified & directed by Engr-in-Charge. |
| 74 | Material and labour for fabrication, supply, fixing and commissioning of box type display boards with MES logo for installations of size not less than 1.5M x 1.0M x 0.2M made out of ACP sheet of 3mm thickness with english alphabets and numerics cut out and designed out of 3mm thick acrylic sheet neatly pasted on the ACP board with flushed LED strips running along the sides of the acrylic letters to be fixed on wall with necessary fixing arrangement ss per the site requirement on roof, wall etc.Note:- (a) Before fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the location including providing electrical connections complete as specified by Engr-in-Charge |
| 75 | Material and labour for fixing of Layout diagram of pipe lay out / flow chart/ shock treatment chart etc of size 1.5M x 1.0M for power houses, sub stations and other E/M installations as per the requirement at various locations made out of pre laminated board with digital printing, pasting side beadings of decorative aluminium channel with proper fixing arrangement etc complete all specified and directed by Engr-in-charge.Note:- (a) Before for fabrication of the display board, the contractor has to produce a paper printout detailing all documents and matter to be displayed so as to get it inspected and passed by Engr-in-charge. (b) Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specified and directed by Engr-in-Charge. (c) The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the location including providing electrical connections complete as specified by Engr-in-Charge |
| 76 | M&L Chemical spray (DC 226 contact cleaner) in container of 415 ml/300g for precision blended multipurpose product for prevents corrosion penetrates, lubricants, displaces and seals out moisture release rusted mechanism etc complete all as specified and directed by Engr-in-Charge. |
| 77 | Material and labour for spraying herbicide (Round up) on area to remove unwanted vegitation/grass at various locations as directed by Engr-in-Charge |
| 78 | Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 150 sqmm 3.5 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc. Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost. |
| 79 | Description all as per ser item No 67.00 here-in-befoe butof size 35 Sqmm 3.5 Core |
| 80 | Demolition of existing valve pit chamber , M&L for masonry valve pit of any size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally, 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed.Note :- MS sheet and iron work will be measured and paid seperately. |
| 81 | M& L for complete dewatering and cleaning of overhead RCC tank of capacity not less than 50 KL gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat food grade paint to wall , floor and ceiling , internal surface of reservoir where applicable all as directed by engr-in-charge |
| 82 | Supplying, installing, testing & commissioning outdoor type cubical panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front and back openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able with arrangement of pad locking on both doors incl 2 no. of pad locks of three keys shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, incl CU bus bar of 300 A , tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following :- |
| 83 | (a):- MCCB 40 Amps, 36 KA 4 pole 415 Volts AC, adjustable type, complete all as directed by Engg-in-charge (incoming)-01 Nos.(b):- DOL stater suitable for 5 HP Three phasesbmerssible pump (Outgoing)-02 Nos.(01 Nos Spare)(c) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nos(d) Single phase preventer,relays for over and under voltage, phase sequence corrector,time relay for automation of pumps(e):- Digital Type Multifunctional meter to measure voltage ,current,frequency,PF KW,KVA auxiliary voltagerange 230 volts ,,accuarcy class 1.00, with CTs & Pts(f) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cabe lugs, sleeves, glands etc complete |
| 84 | Material and labour for carry out Servicing quartely from authorised rep or service engineer of the manufacturer of Industrial R.O+U.V. Water purifier system consisting of Fiber Reinforced Polymer Vessel with treatment media like FBM, AFM, MGS, ACM, CPM, etc of capacity 1000 LPH,complete all as specified and directed by Engr-in-Charge |
| 85 | Attending Complaints for rectification of fault in RO i panel (contorl Panel) of Industrial R.O+U.V. Water purifier system consisting of Fiber Reinforced Polymer Vessel with treatment media like FBM, AFM, MGS, ACM, CPM, etc of capacity 1000 LPH including replacement of worn out relay, cable, fuse,diode etc ,complete all as specified and directed by Engr-in-Charge |
| 86 | Supply and fix and testing food grade Activated carbon for RO plant of capacity 1000 LPH ,complete all as specified and directed by Engr-in-Charge |
| 87 | Supply and fix and testing food grade softner Resin 220 Na for RO plant of capacity 1000 LPH, complete all as specified and directed by Engr-in-Charge |
| 88 | Supply and fix and testing 20\\" Jumbo Span Candel for RO plant of capacity 1000 LPH,complete all as specified and directed by Engr-in-Charge(Note : Model should be compatable for existing RO plant) |
| 89 | Supply and fix and testing RO Membren 40 x 40 for RO plant of capacity 1000 LPH ,complete all as specified and directed by Engr-in-Charge(Note : Model should be compatable for existing RO plant) |
| 90 | Supply and filling clean wash sand for RO plant of capacity 1000 LPH,complete all as specified and directed by Engr-in-Charge |
| 91 | Supply and filling (NaCl) (Common Salt) for RO plant and water softening plant for filteration process ,complete all as specified and directed by Engr-in-Charge |
| 92 | Supply and fixing in replacement of butterfly valve of size 150 mm (PN 1.6) (ISI Marked) gtype complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv, complete all as specified and directed by Engr-in-Charge |
| 93 | Description all as per ser item No 80.00 here-in-before but of size 100 mm bore |
| 94 | Description all as per ser item No 80.00 here-in-before but 80 mm bore |
| 95 | Description all as per ser item No 80.00 here-in-before but of size 50 mm bore |
| 96 | Material & labour for 1000 ltr RO plant vertical High pressure CRI pump material of construction stainless steel suitable for single phase 230 Volts 3 HP capacity coupled with electeic motor 2.2 KW including connection to the RO plant and testing, complete all as specified and directed by Engr-in-Charg |
| 97 | Material & labour for fully automatic water level controller and indicator with float sensor and contactor for 2HP non clog sewarage pump, complete all as specified and directed by Engr-in-Charg |
| 98 | Material and labour for Y strainer PN 16 150mm dia CI body with stainless steel strainer, complete all as specified and directed by Engr-in-Charg |
| 99 | Description all as per ser item No 80.00 here-in-before but of dia 100mm dia |
| 100 | S&F in replacement of load line MCCB 250 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 36 KA,Ics=100% Icu including taking down the old existing MCCB , complete all as specified and directed by Engr-in-Charg |
| 101 | S&F in replacement of load line MCCB 200 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 36 KA,Ics=100% Icu including taking down the old existing MCCB , complete all as specified and directed by Engr-in-Charg |
| 102 | S&F in replacement of load line MCCB 63 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 36 KA,Ics=100% Icu including taking down the old existing MCCB , complete all as specified and directed by Engr-in-Charg |
| 103 | S&F in replacement of load line MCCB 160 Amps 3 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 36 KA,Ics=100% Icu including taking down the old existing MCCB , complete all as specified and directed by Engr-in-Charg |
| 104 | S&F in replacement of load line MCCB 63 Amps 3 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 36 KA,Ics=100% Icu including taking down the old existing MCCB , complete all as specified and directed by Engr-in-Charg |
| 105 | Material and labour for 3 pole power contactor current rating 60-100A suitable for lug as well as lugless termination with suitable relay fixing in existing panel of make L&T (MO 70, RT -02) or any other equivalent model , complete all as specified and directed by Engr-in-Charg |
| 106 | Material & labour for fixing UPVC ball valve 150mm dia siutable for withstand 6kg/cm2 plain/threaded as per site requirement , complete all as specified and directed by Engr-in-Charg |
| 107 | Material & labour for fixing UPVC ball valve 75mm dia siutable for withstand 6kg/cm2 plain/threaded as per site requirement, complete all as specified and directed by Engr-in-Charg |
| 108 | Material & labour for fixing UPVC ball valve 50mm dia siutable for withstand 6kg/cm2 plain/threaded as per site requirement, complete all as specified and directed by Engr-in-Charg |
| 109 | Supply and fixing UPVC fittingsISI marked including, complete all as required at site and as directed by Engr-in-Charge. |
| 110 | Elbow 160mm |
| 111 | Elbow 110mm |
| 112 | Elbow 90mm |
| 113 | Elbow 75mm |
| 114 | Elbow 63mm |
| 115 | Elbow 50mm |
| 116 | Reducing TEE 160x110 |
| 117 | Reducing TEE 110x90 |
| 118 | Reducing TEE 110x63 |
| 119 | Reducing TEE 90x75 |
| 120 | Reducing TEE 90x63 |
| 121 | Coupler 160mm |
| 122 | Coupler 110mm |
| 123 | Coupler 90mm |
| 124 | Coupler 63 mm |
| 125 | Coupler 50mm |
| 126 | End Cap 50mm |
| 127 | solvent cement pack of 250 ML |
| 128 | Material & labour for cleaning the water softener 55000 LPH quartely by checking the hardness of water and dewatering the brine tank removing the silt and scrubbing the tank , checking the tightnesss of all valves and seal ,opening the softener tank,back washing, fast rinse ,descaling the surfaces and resin with with measured dose of resin cleanasing agent , complete all as specified and directed by Engr-in-Charg |
| 129 | S & F in repair/replacement of submerssible pumping set suitable for electric driven 415V, AC, 50 Hz, 3 Pole suitable for 50 mm dia delivery complete of capacity 3HP stainless steel body, discharge 170 LPM at 70 Mtr Head, including provn of suitabled size connecting piece/distance piece suitable to connect the pump with pipe & necessary arrangement for welding/fixing with pump end including submerssible copper conductor cable 6sqmm 3core 50mtr with DOL Starter, complete all as specified and directed by Engr-in-Charge.Note Old one should be deposited to the store. |
| 130 | Material & Labour for submerssible copper conductor 4Sqmm 3core flat PVC water resistant conforming to Is 694, complete all as specified and directed by Engr-in-Charg |
| 131 | Decoupling, disconnecting suction line and discharge line taking down from foundation bolts, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line re-alignment commissioning and testing in respect of centrifugal/multistage pump of capacity 20/30 HP, complete all as specified and directed by Engr-in-Charg |
| 132 | Description all as per Item No 101.00 here-in-before but of size upto 15 HP |
| 133 | S&F parts for single/double stage pump of capacity 25/20/15/12/10HP as per manufacturer's composition of existing make of pump as below, complete all as specified and directed by Engr-in-Charg |
| 134 | (a) Pump impeller made out of CI |
| 135 | (b) Pump shaft stainless steel shaft complete with check nut and keys |
| 136 | (c) Shaft sleeves |
| 137 | (d) Casing bearing |
| 138 | (e) Bearing housing |
| 139 | (f) tyre coupling/star coupling |
| 140 | (h) Gland cup with nut and bolts |
| 141 | S&F parts for single/double stage pump of capacity 7.5/5HP/3HP as per manufacturer's composition of existing make of pump as below all as specified and directed by engr-in-Charge. |
| 142 | (a) Pump shaft stainless steel shaft complete with check nut and keys |
| 143 | (b) Shaft sleeves |
| 144 | (c) Casing bearing |
| 145 | (d) Bearing housing |
| 146 | (e) tyre coupling/star coupling |
| 147 | (f) Gland cup with nut and bolts |
| 148 | Disconnecting electric connection of size upto 30 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. Cost of loading, unloading & transportation shall be deemed included in the quoted rates. complete all as directed by Engineer-in-Charge.Note:(1) Winding of motor stator & rotor shall be measured & paid separately (ii) Transportation of the same to be included in the quoted rate. |
| 149 | Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class 'B' paper insulation inside the slots, rewinding the motor of capacity 100/75/60/50/40/30/25/20/15/12/10/7.5/5HP/3HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time. Note:- Cost of labour for winding deemed to be included in the rate quoted. |
| 150 | S&F in replacement of Pump bearing suitable for 20 HP including taking down the old existing bearing. |
| 151 | S&F in replacement of Pump bearing suitable for 12.5 HP including taking down the old existing bearing. |
| 152 | S&F in replacement of Motor bearing suitable for 20 HP as per existing sizeincluding taking down the old existing bearing. |
| 153 | S&F in replacement of Motor bearing suitable for 12.5 HP as per existing sizeincluding taking down the old existing bearing. |
| 154 | M&L for spray painting of water softening plant complete with pipes ,valves frame of including surface preparation by scrapping with Emery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour of approved make and writing the capacity of the plant complete all as specified and as directed by Engr-in-charge. |
| 155 | Material & Labour for balancing valve 100mm dia (PN 1.6) (ISI Marked) with iron wheel head, both end flanged, stainless steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv, complete all as specified and directed by Engr-in-Charge. |
| 156 | Description all as per ser item No 112.00 here-in-before but of dia 65mm |
| 157 | Description all as per ser item No 112.00 here-in-before but of dia 50mm |
| 158 | Description all as per ser item No 112.00 here-in-before but of dia 40mm |
| 159 | Material & labour for neoprene single arch flexible connectors PN 16 of 150 mm bore with integral rubber flange of Make (Easy flex), complete all as specified and directed by Engr-in-Charge. |
| 160 | Description all as per ser Item No 133.00 but of size 100mmdia |
| 161 | Material & labour for fixing rotational moulded polyethlene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres, complete all as specified and directed by Engr-in-Charge. |
| 162 | Supply & fixing GI pipes of size 15 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc , complete all as specified and directed by Engr-in-Charge. |
| 163 | Material & labour for pressure booster pump 0.5 HP single phase 220 Volts with thermal overload protector,Y strainer,pressure switch,size 25x 25mm with electic cable appros 15 mtr length of size 1.5 Sqmm ,with made of CGI sheet for dust/water ingress , complete all as specified and directed by Engr-in-Charge. |
| 164 | Material & Labour for replacement of resin for water softening plant ,taking out the old and refilling the new one and testing the hardness of water, complete all as specified and directed by Engr-in-Charge. |
| 165 | Material & Labour for replacement of strainer in water softening plant ,taking out the old and refilling the new one and testing the hardness of water, complete all as specified and directed by Engr-in-Charge. |
| 166 | Material & labour for disc filter 100mm dia made of polyamide reinforced with fibre glass of maximum working pressure 10 Bar,100 Micron working on helix technology, complete all as specified and directed by Engr -in -Charge |
| 167 | Dismantling and taking down old u/s earthing complete with galvanised earth plate electrode 600mm x 600mmx 6.00mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 25x4 mm GI strip earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 40mm bore medium grade and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-I & including necessary excavation and earth work. The rate also include charcoal & salt in alternate layers, 20mm bore GI pipe medium grade for watering and 40mm bore GI protection pipe (light grade), funnel, wire mesh, cast iron cover and frame etc, complete, all as specified or indicated and as directed including testing on completion complete all as specified and directed.Note : (i) The quoted rate shall include the cost of earth work, GI pipe for watering, GI protection pipe, funnel, wire mesh, RCC cover, etc. complete. RCC cover shall be 50mm thick in 1:2:4 type B-1 using 8mm bars @10cm c/c both way.(ii) The quoted rate shall include the cost of the earth pit covers to be conspicuously marked of plate with stand grouted in PCC.(iii) On testing after completion if the desired earth resistance is more than 2Ώ the earthing will be redone at no extra cost |
| 168 | Material & labour for repairing existing earthing any type incl making & cleaning of earth pit, repair of pits, fixing of new funnel , pit cover, painting on pit with cement base white paint complete all as per direction of Engr-in-charge. Note: (i) Cost of funel, pit cover, cement work, PCC work and painting etc incl is quoted rate. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
