|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: WELCOME MAINT INCLUDING CERTAIN CONNECTED REPAIR WORKS IN MD OFFRS ENCLAVE AT SP MARG UNDER GE NEW DELHI Contract No: GE/ND-111/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornice, pillaster, etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on old decorated surfaces of wall complete all as specified and directed. |
| 3 | M&L for preparation of old decorated plastered or unplastered surfaces of walls including complete removal of existing surfaces by using mechanical scrapers and filling holes with putty etc and applying three coats of white wash on old decorated surfaces of wall complete all as specified and directed. |
| 4 | All as per item No 1.00 above but one coat on ceiling complete all as specified and directed. |
| 5 | M& L for complete removal of existing old treatment on surface from walls using mechanical scrapper only and filling holes of nails with putty etcand applying a coat of uniform ( average 1.0 mm thickness) of cement base wall care putty of approved make (Birla/JK) to the entire surface of walls surfaces finished even and smooth and then applying a coat of alkali resistant primer over putty surface and finally applying two coats of oil bound distemper on wall surface to give an even and smooth surface complete all as specified and directed. |
| 6 | M&L for applying one coat of distemper oil emulision (O.B.D) white or tinted (As approved) on walls surfaces including preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed. |
| 7 | M&L for applying one coat of distemper oil emulision (O.B.D) white or tinted (As approved) on ceiling surfaces including preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed. |
| 8 | M&L for preparation of old painted surfaces of wood or wood based materials of any discription not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | All as per item No 07.00 above but two coat complete all as specified and directed. |
| 10 | M&L for Preparatiopn of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | All as per item No 09.00 above but two coat complete all as specified and directed. |
| 12 | M&L for Preparing old painted surfaces of brick,stone,concrete, asbestos cement or plaster surfaces of any description over 10 cm girth or width, not otherwise described and painting with one coats of synthetic enamel paint complete all as specified and directed. |
| 13 | M&L for one or more coat of french polish on old surfaces of any description, width or girth incl cleaning and preparing old wooden surfaces complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed. |
| 15 | M&L for 15mm thick ready mix plaster in patches of on any surfaces of brick/concrete includidng application of bonding coat as per manufacturers instruction including finished even and fair finished complete all as specified and directed. |
| 16 | M&L for 10 mm thick ready mix plaster in patches of (Make Ultra tech) on any surfaces of brick/concrete includidng application of bonding coat as per manufacturers instruction including finished even and fair finished as in ceiling/ soffits complete all as specified and directed. |
| 17 | M&L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 18 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 19 | M&L for applying two or more coats of oil bound distemper on newly plastered surfaces of walls including a coat of 1.0 mm thick (average) wall care JK putty to give an even and smooth surface including preparation of new surfaces complete all as specified and directed.Note-Payment shall be made for two coats only |
| 20 | M&L for touch up of distemper applying ( two or more coat) on walls area of distemper not exceeding 12 sqm ,match to existing shade of wall including preparation existing surface complete all as specified and directed. |
| 21 | M&L for refixing of shutters of any description in same opening after taking down for resecuring ,easing, repairing etc exc 1.0 sqm but n exe 2.0 sqm complete all as specified and directed.. |
| 22 | S&F in repairs stainless steel drappery rods 25mm dia confirming to Gde 304 and having wall thickness 1.40 mm (minimum) with two number brackets and two numbers of knob for each curtain rod ( length varying from 1.1. to 2.50 RM) fixed to brick/concrete wall knobs on each end of curtain rod complete all as specified and directed. |
| 23 | M&L for Cutting chases in Brick walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed. |
| 24 | Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, vertical surface of walls etc complete all as specified and directed. |
| 25 | M&L for granite work 16 to 18mm thick, (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade, bedding layer of cement mortar 15 mm thick in CM 1:4 complete all as specified and directed. |
| 26 | Dismantling timber scantling as in fillets, rails, post, rafters, purlins, etc under 40 Sq. cm in section in unframed work complete all as specified and directed. |
| 27 | M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed. |
| 28 | M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed. |
| 29 | M&L for Beads of 2nd class hard wood, straight (any size) for glazed or gauged joinery, renewed, including mitres etc including taking down beads as in repairs complete all as specified and directed. |
| 30 | S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 40 mm complete all as specified and directed. |
| 31 | S&F in repairs 40 mm dia , cupboard knobs fixed with nut , screw and washer of stainless steel complete all as specified and directed. |
| 32 | S&F in repairs Tubular towel rail 20mm dia 'D' type brass chromium plated 60 cm long between flanges complete all as specified and directed. |
| 33 | S&F in repairs Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in complete all as specified and directed. |
| 34 | S&F in repairs Double aluminium channel size 10x20x2mm, complete all as specified and directed. |
| 35 | S&F in repairs MS roller with \\"C\\" shape stapple, chromium plated for 5.00 mm thick sheet glass, complete all as specified and directed. |
| 36 | S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 37 | M&L for 18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood liping alround incl polishing to lipping including taking down old existing board any type complete all as specified and directed. |
| 38 | M&L for Glazing with plain sheet glass, ordinary quality, 5 mm thick and glazing with oil putty or aluminium or PVC / wooden beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 39 | M&L for Glazing with 5.5mm thick sheet glass, ordinary quality, of any size as in aluminium window and including grinding of edges for showcase sliding shutter and shelves incl fixing brakets complete all as specified and directed. |
| 40 | M&L for Glazing with figured glass (Frosted), pin head type, 5 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, or aluminium glazed with putty or fixed with beads complete all as specified and directed. |
| 42 | Taking up or down steel tubing and connection incl cleaning for refixing or removal to store for 15 mm dia pipe complete all as specified and directed. |
| 43 | S&F Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed. |
| 44 | S&F in repairs Bib taps, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down screwed for iron pipe, 15 mm bore complete all as specified and directed. |
| 45 | S&F in repairs bib tap, 15 mm bore, standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed. |
| 46 | S&F in repairs Brass chromium plated toilet paper holder, fixed to wall with CP brass screws complete all as specified and directed. |
| 47 | S&F in repairs Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed one ends for iron pipe complete all as specified and directed. |
| 48 | S&F in repairs Stop valves (angle valve type), cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed one ends for iron pipe complete all as specified and directed. |
| 49 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm. complete all as specified and directed. |
| 50 | S&F in repairs Toughened glass, 5.5mm thick, bathroom corner shelf of size 300mm with stainless steel railing and stainless steel fasteners fixed on wall complete all as specified and directed. |
| 51 | S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) white including fixing bolt complete all as specified and directed.Make: Hindware/ Jaguar/ Cera |
| 52 | S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete all as specified and directed.Make: Hindware/ Jaguar/ Cera |
| 53 | S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, dual tank , syphonic action type, white with inlet ball valve float and handle, bracket complete all as specified and directed.Make: Hindware/ Jaguar/ Cera |
| 54 | S&F in repairs Health faucet Chromium plated brass with 1.50 m long flexible pipe for WC complete all as specified and directed.Make: Hindware/ Jaguar/ Cera |
| 55 | S&F in repairs Vitreous, China wash basin, white , flat back , size 550x 450mm excluding taps, waste chain and plug and porcelain stopper but including the brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.Make: Hindware/ Jaguar/ Cera |
| 56 | M&L for Sink of stainless steel 1 mm thick kitchen sink with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including cantilever bracket and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm inculding taking down the old sink of any description complete all as specified and directed. |
| 57 | S&F in repairs Brass CP mixer (Central hole basin mixer), for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed.Make: Hindware/ Jaguar/ Cera |
| 58 | S&F in repairs PVC mirror cabinet of size 330 mm x 430 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed. |
| 59 | S&F in repairs Brass chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.Make: Hindware/ Jaguar/ Cera |
| 60 | S&F in repairs Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 61 | S&F in repairs Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed.Make: Hindware/ Jaguar/ Cera |
| 62 | Dismantling of floor of size exc 1.5 Sqm and not exceeding 5.00 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc complete all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 5.00 Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment. |
| 63 | Dismantling of floor of size not exceeding 1.50 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc complete all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 1.50 Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment. |
| 64 | M&L for treating at points of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.50 Ltr/hole by drilling 6 mm dia holes at the down ward angle of 45 degree a 150 mm centre to centre and sealing the same to match the specification of existing finishes complete all as specified and directed. |
| 65 | Providing & injecting chemical emulsion at points of contact of wall as above of skirting work by termite chemical emulsion @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same complete all as specified and directed. |
| 66 | M&L for taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of any necessary parts required to make the shutters moving smoothly and entire rolling shutters shall be made including necessory providing pulling arrengement with gear box with fully functional the entire satisfication of Engineer -in-Charge and refixing the same including hood cover complete all as specified and directed. |
| 67 | S&F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint laid in trenches or floors, including taking down old unserviceable CI pipes complete all as specified and directed. |
| 68 | S&F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding taking down old unserviceable CI pipes complete all as specified and directed. |
| 69 | S&F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified and directed. |
| 70 | S&F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding tacking down old unserviceable CI pipes complete all as specified and directed. |
| 71 | S&F in repair stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed. |
| 72 | S&F in repairs stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed. |
| 73 | S&F in repairs CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with oval access door complete all as specified and directed. |
| 74 | S&F in repair for 50mm wide and 5 to 6 mm thick rubber beading (door seal) fixed to door shutter with nails complete all as specified and directed. |
| 75 | S&F in repairs CI bends 100mm dia (any radius), with duck's foot or heel rest complete all as specified and directed. |
| 76 | S&F in repairs 100mm bore CI branch pieces,single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches,with oval access door complete all as specified and directed. |
| 77 | S&F in repairs CI nahani trap with grating including jointing to waste pipe , dia of outlet 75mm fixed in PCC 1:2:4 type B1 complete all as specified and directed. |
| 78 | S&F in repairs 50 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 79 | M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/ 450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer including demolition plaster till exposing of brick/concrete surface and existing broken/cracked tiles including removing rubbish off the premises(To match size of existing tiles) complete all as specified and directed. |
| 80 | M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality, set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes including dismantling existing broken/cracked tiles and removing of rubbish off the premises complete all as specified and directed. |
| 81 | All as per item No 79.00 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 82 | M&L for light shade Vitrified ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles not exe 0.36 sqm , in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement incl incl screed bed or bedding 15 mm thick in CM 1:6 for laying floor finished including dismantling broken/cracked tiles and removing rubbish off the premises complete all as specified and directed. |
| 83 | All as per item No 81.00 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 84 | M&L for touch up of distemper (applying two or more coat) on walls area of distemper exceeding 4 sqm not exceeding 12 sqm ,match to existing shade of wall including preparation existing surface complete all as specified and directed. |
| 85 | S&F in repairs stainless steel plate rack of size 900 X 775 X 250 mm, made out of 1.00 mm thick steel sheet fixed to walls incl rawl plugs, drilling etc complete incl taking down old plate rack of complete all as specified and directed.. |
| 86 | S&F in repairs floor door stoppers of aluminium alloy body and tounge, anodised,with hard drawn steel spring over all length of cover plate is 140 mm complete all as specified and directed. |
| 87 | S&F in repairs MS Night latch of 100mm size 4 lever complete all as specified and directed. |
| 88 | S&F mild steel framed work as in grills, gratings etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed ballustered, walk ways, railing and similar works confirming to Fe 290 Gde E-165 including necessary welding required at site to increase the existing railing height in balacony of Md Offrs Qtrs complete all as specified and directed. |
| 89 | Dismantling wrought iron or mild steel work of any description no other wise provided for as in covers of water tanks complete all as specified and directed. |
| 90 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 91 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium beading alround and fixed with steel screw complete all as specified and directed. |
| 92 | S&F in repair wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple size of mesh 12mm complete all as specified and directed. |
| 93 | M&L for Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 94 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed. |
| 95 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and directed. |
| 96 | Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1.00 Sqm complete all as specified and directed. |
| 97 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed. |
| 98 | M&L for Plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 99 | S&F Stainless steel fastner of size 200 to 250mm for fixing wooden door frame and like in postion complete all as specified and directed. |
| 100 | MS for flat iron as in hold fast, bands,straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates;hook and pintle hinges large hasps andstaples; chains, hand madesliding bolts; clamps; hold fasts; wall ties, hooks for hangingfans; plainangle cleats forsecsuring purlins to wood trusses orrafters; knee piece inserts; twoway and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 101 | M&L for PCC 1:2:4 type B-1 (20mm graded agg) as in anchorging hold fast etc bed plate etc complete all as specified and directed. |
| 102 | S&F second class hard wood 35mm thick glazed and skelton door shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters as specified complete all as specified and directed. |
| 103 | S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side with teak wood lipping on edges of shutter complete all as specified and directed. |
| 104 | S&F aluminium sheet, plain, 0.5 mm thick , including taking down old sheet from doors complete all as specified and directed. |
| 105 | S&F Solid PVC Door frame of size 50 mm x 95 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 106 | S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 107 | S&F Factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing complete all as specified and directed. |
| 108 | S&F Factory made solid PVC door shutter 30mm thick (stiles), wire gauzed i.e. panel will be of wire gauzed in lieu of PVC sheet panel one side prelam. The wire gauzed shall be wrapped an additional square 8mm mild steel solid tube & this tube shall be welded to mild steel tubes. The wire gauzed shall be steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40mm fixed and strectched to tighten firmly and drawing on Sl Page 159 of SSR (Part - II) complete all as specified and directed. |
| 109 | S&F Factory made solid panel PVC window/ shutter 30 mm thick (style),but fully glazed i.e. glass pane used instead of 5 mm single side prelam PVC sheet panel. Shutter frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm widthstuck inside with solvent cement for stiles and single side prelame PVC sheet for top & bottom rail on either side & as gap insert for top rail & bottom rail.Glass pane to be fittedwith suitable PVC sheet beading and joined together with solvent cement complete all as per specification & drawing complete all as specified and directed. |
| 110 | S&F Factory made solid panel PVC window shutter 30 mm thick (style),but fully wire gauzed i.e. wire gaized used instead of 5 mm single side prelam PVC sheet panel. Shutter frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm widthstuck inside with solvent cement for stiles and single side prelame PVC sheet for top & bottom rail on either side & as gap insert for top rail & bottom rail.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be streched to tighten firmly complete all as per specification & drawing complete all as specified and directed. |
| 111 | S&F stainless steel barrel tower bolt of 200 mm length of extruded section complete all as specified and directed. |
| 112 | S&F stainless steel sliding door bolt, of size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed. |
| 113 | S&F Stainless steel butt hinges of size 75mm complete all as specified and directed. |
| 114 | S&F Stainless steel butt hinges of size 100mm complete all as specified and directed. |
| 115 | S&F hellical door spring 150 mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate complete all as specified and directed. |
| 116 | S&F stainless steel 100 mm long handle, complete all as specified and directed. |
| 117 | S&F stainless steel 150 mm long handle, complete all as specified and directed. |
| 118 | S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 119 | S&F powder coated aluminum frame / guiding rail for sliding or side hung windows/ ventilators and including for sliding shutters with one or more rebates incl. necessary joining cleats, rubber gasket/beading glazing clips for fixing, etc complete all as specified and directed. |
| 120 | S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 121 | S&F in repair for 50 mm pvc for bend/ tee complete all as specified and directed. |
| 122 | S&F in repiars, stainless steel 200 mm size barrel tower bolt of extruded section (ISI Marked) complete all as specified and directed. |
| 123 | S&F in repairs, stainless steel handles , fabricated type , anodised of size 150mm (ISI Marked) complete all as specified and directed. |
| 124 | S&F in repiars, 300 mm size stainless steel barrel tower bolt of extruded section (ISI Marked) complete all as specified and directed. |
| 125 | Dismantling boarding/ kitchen cabinets, any description, fixed in any position with nails complete all as specified and directed. |
| 126 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/ Bathroom/ Toilet/ Kitchen & Cabinets complete all as specified and directed. |
| 127 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on one faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/ Bathroom/ Toilet /Kitchen and Cabinets complete all as specified and directed. |
| 128 | S&F in repairs 75 mm long L Bihari concealed type auto closing hinges incl stainless screw complete all as specified and directed. |
| 129 | S&F in repairs Modular Cabinet Kitchen accessories of Stainless Steel grade-304, minimum above 4mm size rod thickness including :-(i) Grain trolley, (ii) Thali basket, (iii) Cup & saucer basket, (iv) Glass basket, (v) Plate basket, (vi) Oil Pull out Tray (Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement complete all as specified and directed by Engineer in charge |
| 130 | S&F in repairs hydraulic silent soft closing tandom drawer system concealed full extension double gallery 200mm length 500mm, width adjustable and load capacity should not be less 45 Kgs fixed with screws in cupboard incl all fittings complete all as specified and directed by Engr-in-charge. Make: Hettich, Hafele & Kalf. |
| 131 | S&F in repairs hydraulic silent soft closing tandom drawer system concealed full extension double gallery 300mm length 500mm, width adjustable and load capacity should not be less 45 Kgs fixed with screws in cupboard incl all fittings complete all as specified and directed by Engr-in-charge. Make: Hettich, Hafele & Kalf. |
| 132 | Demolition of reinforced cement concrete in roof, floors (other than ground floors), beams, slabe, staircases, landing, chajjas and similar suspende work complete all as specified and directed. |
| 133 | S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and directed. |
| 134 | Form work to sides and soffits of floor or roof beams, cantilevers, shelves incl supports, overhang for rough finished flat surfaces complete all as specified and directed. |
| 135 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 05cm but n exc 10cm wide complete all as specified and directed. |
| 136 | M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate (nominal mix ) in slabs supported on walls, beams and columns in floor, roofs, conopies and in shelves and the like complete all as specified and directed. |
| 137 | Demolition of brick work or stone masonry built in cement mortar or cement lime mortar complete all as specified and directed.Note: The work shall be carried out upto sixth storey height of buildings including all safety factor. |
| 138 | M&L for brick work with old size subclass B\\" bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.Note: The work shall be carried out upto sixth storey height of buildings including all safety factor. |
| 139 | M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces as in ceiling/soffits in CM (1:4) finished with finish complete all as specified and directed.Note: The work shall be carried out upto sixth storey height of buildings including all safety factor. |
| 140 | S&F in repair Block boards 18mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed. |
| 141 | S&F in repairs high gloss finish liner laminated/ high pressure laminated (HPL) sunmica of 1.0 mm thick of multi colour /design as approved by GE to be fixed with existing surface/new surface including complete removing all treatment or prepration of new wood /ply surface and apply best adhesive for pasting as per manufacture instruction complete all as specified and directed. |
| 142 | Labour only for making half curving the edges of marble / granite slab and polishing complete all as specified and directed. |
| 143 | M&L for drilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite complete all as specified and directed. |
| 144 | M&L for drilling holes for pipes etc exc 25mm but n exc 60mm dia in brick hole complete all as specified and directed. |
| 145 | S&F in repairs Vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete. Squatting pan including connection to trap, and to flushing pipe, anti-siphonage pipe, etc. complete including making good to floor complete all as specified and directed.Note: (a) Srl Item No 1.00 to 12.00, 21.00, 24.00, 27.00, 31.00, 35.00, 36.00, 43.00, 45.00 to 47.00, 49.00 to 60.00, 78.00 to 82.00, 87.00, 97.00, 101.00, 102.00, 104.00 to 106.00, 118.00, 119.00, 125.00, 126.00, 128.00 to 130.00, 132.00 & 139.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
