Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: REPAIR AND MAINT TO JOINERY, CEILING PLASTER AND PAINTING (INTERNAL, EXTERNAL AND CEILING), PLUMBING WORK, SANITARY WORK AND CONNECTED ITEMS FOR BLDGS OF NARAINA BAGH, NARAINA UNDER GE NEW DELHI Contract No: GE/ND-118/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | S&F in repairs, aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 3 | S&F in repairs, 2mm thick fibre sheet glass, ordinary quality and glazing with oil putty, in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 4 | S&F in repairs, 3mm thick sheet glass, ordinary quality and glazing with oil putty, in squares n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 5 | S&F in repairs, 4.8mm thick sheet glass, ordinary quality and glazing with oil putty, in squares exc 0.5 sqm in each pane complete all as specified and directed. |
| 6 | S&F in repairs, looking mirror with aluminium beading frame and 5mm thick ply on back side of size 630 X 450mm , 3mm thickness complete all as specified and directed |
| 7 | S&F in repairs, 15mm bore brass head, phase, spindle etc of any size for bib cock/pillar cock/ stop cock/WHB or Wall mixture etc any type complete all as specified and directed. |
| 8 | S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed. Make: Cera Cat Part No F1015201/ Jaquar Cat Part No OPP-CHR-15053PM/ or equivalent of make as specified in PS. |
| 9 | S&F in repairs chromium plated brass two way bib tap fancy type screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed. Make: Jaquar CAT Part No ALI-CHR-85041/ Cera Cat Part No F-1017163/ or equivelant of make as specified in PS. |
| 10 | Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 500 Ltrs capacity of tanks complete all as specified and directed. |
| 11 | Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 1000 Ltrs capacity of tanks complete all as specified and directed. |
| 12 | S&F in repairs 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed. |
| 13 | S&F in repairs 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed. |
| 14 | S&F in repairs, PVC tank covers suitable for 500 litres to 1000 litres tanks complete all as specified and directed |
| 15 | S&F in repairs, 15 mm bore chromium plated fancy type pillar tap swan neck for WHBs with capstan heads/ lever type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.Make: Cera Cat Part No F-2006101 or equivalent of make as specified in PS. |
| 16 | S&F in repair Kitchen Sink Mixer Swivel spout 450 mm long braided hose (wall Mounted) 15mm bore dia chromium plated Brass round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete all as specified and directed.Make : Jaquar/Kohler/cera |
| 17 | S&F in repair Kitchen Sink Mixer swan neck central hole ,600 mm long copper pipes complete all as specified and directed.Make : Jaquar/Kohler/cera |
| 18 | S&F in repair Brass mortice lock vertical type size 100mm & 4 lever including escutchon plate and two no of keys complete all as specified and directed by Engr in charge. |
| 19 | S&F in repairs, 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union complete all as specified and directed. |
| 20 | S&F in repairs, 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union complete all as specified and directed. |
| 21 | S&F in repairs, 25mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union complete all as specified and directed. |
| 22 | S&F in repairs, 32mm bore waste fittings, brass, chromium plated for glazed ware/SS sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 23 | S&F in repairs, 32 mm bore PVC waste pipe for WHB/urinlas/sinks 1000mm long with union etc complete all as specified and directed. |
| 24 | S&F in repairs chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.Make: Jaquar CAT Part No CON-CHR-049NKN/ Cera Cat Part No F-2002153/ or equivelant of make as specified in PS. |
| 25 | S&F in repairs, 15mm bore Bib tap standard of PTMT(Minimum weight 90 gms) any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 26 | S&F in repairs, ball valve 15mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 27 | S&F in repairs, ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 28 | S&F in repairs, ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 29 | S&F in repairs, glass corner shelf of fixed with and including chromium plated brass screws and cleats complete all as specified and directed. |
| 30 | S&F in repairs, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 31 | S&F in repairs, PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 32 | S&F in repairs, 75/80 mm dia CP grating with provision of drain pipe hole/without complete all as specified and directed. |
| 33 | S&F in repairs, 100 mm dia CP grating with provision of drain pipe hole/without complete all as specified and directed. |
| 34 | M&L for PVC (SWR) floor trap /110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 35 | S&F in repairs, 75mm dia PVC (SWR) pipes, with all fittings like bend and joint etc single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed. |
| 36 | S&F in repairs, 110mm dia PVC (SWR) pipes, with all fittings like bent and joints etc single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed. |
| 37 | S&F in repairs, 32/40mm dia PVC (SWR) pipes, with all fittings like bend, Tee and joints etc single socketed, in any length, with rubber rings fixed to walls with suitable clamps etc complete all as specified and directed. |
| 38 | S&F in repairs, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement moratar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 39 | S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cisterm, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 40 | S&F in repairs, 125mm size brass chromium plated shower roses with or with out swivel joints, including fixing to steel pipe or unions complete all as specified and directed.Make: Cera Cat Part No F7020307CH or equivalent of make as specified in PS. |
| 41 | S&F in repairs, ball valve for PVC low level flushing cistern complete all as specified and directed |
| 42 | S&F in repairs, syphon kit complete for PVC low level flushing cistern complete all as specified and directed. |
| 43 | S&F in repairs, syphon kit complete for cascade type one piece EWC any type complete all as specified and directed. |
| 44 | S&F in repairs, wash hand basin vitreous china white, (flat back or angle back type) of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 45 | S&F in repairs, wash hand basin vitreous china white, Oval shape of any size including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 46 | S&F in repair Vitreous china squatting pan of 'Orissa pattern' long pan size 580 x 440 mm white with integral foot rest incl ‘P’ or ‘S’ trap and flush pipe etc complete including making good the floor complete all as specified and directed. |
| 47 | S&F in repair Vitreous China wash down water closet pan with seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified and directed. |
| 48 | S&F in repairs, Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 49 | S&F in repairs hand shower (health faucet) CP with 8 mm dia 1.2 Metre long flexible tube and wall hook complete all a specified and directed. Make: Jaquar CAT Part No ALD-CHR-577 or Equivelant of make as specified in PS. |
| 50 | S&F in repairs, brass chromium plated toilet paper holder with CP brass screws, complete all as specified and directed. |
| 51 | S&F in repairs, brass chromium plated soap dish with CP brass screws complete all as specified and directed. |
| 52 | Dismantlling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 53 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. in patches set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor complete all as specified and directed. |
| 54 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. in patches set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor complete all as specified and directed. |
| 55 | M&L for Glazed ceramic tiles in vertical surface 600x300x 8mm thick in patches set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:4 on wall complete all as specified and directed. |
| 56 | M&L for glazed ceramic coloured tiles in vertical surface 450 x 300 x 7 mm thick over including 10 mm thick rendering 1:4 CM set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles complete all as specified and directed. |
| 57 | M&L for Non skid joint less coloured DGVT matt finished tiles 8 to 10mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm (600x600mm), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 58 | M&L for Non skid joint less coloured SGVT tiles 10mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.74 sqm (1200x600mm), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge |
| 59 | All as per item No 57.00 above but over and including over 10mm thick 1:4 backing cement mortar as in skirting complete all as specified and directed by Engr in charge. |
| 60 | Demolition of brick work built in Cement morteror cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed. |
| 61 | Material & Labour for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 62 | Demolition of cement concrete unreinforced in any description in any position not otherwise provided for complete all as specified and directed. |
| 63 | M&L for providing cement concrete type B0 1:2:4 (12.5 mm graded aggregate in roof kerbs or mud stops rounded or chamfred on edges complete all as specified and directed. |
| 64 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 65 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in floors, steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including 20mm thick cement mortar 1:4 complete all as specifeid and directed. |
| 66 | M&L for rounding the edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specifeid and directed by Engr in charge. |
| 67 | M&L for Green Marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and including cement mortar (1:4), 20mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shades complete all as specified and directed. |
| 68 | M&L for Green Marble work 16 to 18mm thick (table rubbed and polished) in riser of steps and including cement mortar (1:4), 10mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shades complete all as specified and directed. |
| 69 | M&L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including pre mirror polished over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified and directed. |
| 70 | M&L for Kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including pre mirror polished over 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete all as specified and directed by Engr in charge. |
| 71 | M&L for machine pressed precast concrete inter locking pavers block with ceramic/glossy finish of any shape, colour and pattern (as aprroved by engr in charge) conforming to IS-15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigment complete all as specified and directed by Engr in charge. |
| 72 | M&L for Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed by Engr in charge. |
| 73 | M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone complete all as specifeid and directed.Note: Size and colour of stone to be matched with existing stone |
| 74 | M&L for Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq m area and not exceeding 0.5 sq m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing &including silicon treatment complete all as specified and directed. |
| 75 | Taking down chowkhats or frame with shutters without taking of shutters from frames not exc 1.5 Sqm each & removing form site incl making good disturbed portion complete all as specified and directed. |
| 76 | Taking down chowkhats or frame with shutters without taking off shutters from frames of size exc 1.5 Sqm but not exc 4.00 sqm each & removing form site incl making good disturbed portion complete all as specified and directed. |
| 77 | Taking down shutters of any description exc 1 sq. m but n exc 2.00sqm each complete all as specified and directed. |
| 78 | S&F for factory made single extruded WPC (wood polymer composite) solid door/window/Ceosetory windows and other frames/chowkat of size 100mmx50 mm comprising of virgin PVC polymer of K value 50-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame dencity of 750kg/cum, screw withdrawl strength of 200N (Face and 1100N edge), minimum compressive strength of 58N/Sqmm and resistance to flame of class A category and property of being termite/borer proof, water/moiture proof and fire retardant and fixed with MS hold fasts/lugs/SS Dash fastener of required dia and length of complete all as specifeid and directed by Engr in charge.Note : For WPC solid door /windows frames, minus5mm tolerance in dimension ie depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 79 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specifeid and directed by Engineer In- Charge.Note: stainless steel butt hinges shall be paid separately |
| 80 | Supply and fixing WPC Cup Board made of 18 mm thick (solid PVC sheet) (Plus / minus 0.7) celuka PVC ply complete for hold of shelf / partition and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partition / wall side to be lipped with 18 mm x 1 mm thick PVC sheet of density 600 Kg /cbm manufactured by as ISO -9000 certified company , using solvent cement etc.( including all necessary Aluminium hardware fitting i.e soft closing hinges of make-hettich, godrej, 4 handles, ball catchers including locking arrangement and fixing of steel rod for cloth hanger in each Cup board including dismantling of existing complete in all respect complete all as specifeid and directed.Note: measurement should be taken external face only i.e. length and breadth) |
| 81 | S&F stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make - (Hettich/Haffele or equivalent in others) to cupboard shutters of kitchen cabinets with full threaded steel screws including making necessary recess in board and finished etc complete all as specified and directed by Engineer-in-charge. |
| 82 | S&F 30mm thick flush shutters door, solid core construction, with block board core and plywood face panels, with particle board core on both side complete all as specifeid and directed. |
| 83 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 84 | S&F 200 mm long ISI cerified SS barrel tower bolts, with ss screws complete all as specified and directed. |
| 85 | S&F ISI cerified SS handles 150 mm long polished bright with ss screws complete all as specified and directed. |
| 86 | S&F ISI certified SS sliding door bolts 250 mm long and fixed with ss screws to wooden doors complete all as speciifed and directed. |
| 87 | S&F ISI cerified SS butt hinges 125 mm long type C11 with ss screws fixed to wooden doors complete all as specified and directed |
| 88 | S&F ISI cerified 140 mm stainless steel door stopper with twin rubber shoes fixed with SS screws complete all as specified and directed. |
| 89 | S&F in repair stainless steel drapery rod (curtain rod) of 25mm dia, wall thickness 1.00mm minimum, fancy type, complete all as specified and directed. |
| 90 | S&F stainless steel decorative type bracket and side cups for curtain rods 25mm dia fixed with screws complete all as specified and directed. |
| 91 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 92 | S&F powder coated aluminium anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifeid and directed. |
| 93 | S&F aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :-(i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp including 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut including 0.45mm nominal dia of SS wire mesh and average width of aperature 1.18mm complete, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. |
| 94 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 95 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) (A) Area not exceeding 2.00 sqm each |
| 96 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (5mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh l8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass complete all as specified and directed.Note: (a) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (b) Net opening will be measured for payment purpose |
| 97 | Supply and fixing 5.00mm thick heat absorbing glass any size complete all as specified and directed. |
| 98 | S&F stainless steel wire cloth, 0.254mm nominal dia of wire and 0.95mm average width of aperture and fixed with tinned tacks or galvanised wire staple etc complete all as specifeid and directed. |
| 99 | S&F in repairs stainless steel wire cloth, 0.254mm nominal dia of wire and 0.95mm average width of aperture and fixed with tinned tacks or galvanised wire staple etc complete all as specifeid and directed. |
| 100 | M&L for complete removal of existing treatment from wall surfaces using vacuum based sanding machine, removal of nails etc & filling cracks/holes by applying wall care putty(multi purpose mixer shall be used for uniform and proper mixing of putty)and applying two coats of oil emulsion distemper using machanical means over a coat of alkali resistant primer over a coat of wall care putty 1.00mm thick (JK/Birla) to bring the surfaces even and smooth complete all as specified and directed. |
| 101 | M&L for complete removal of existing treatment from ceiling surfaces using vacuum based sanding machine and applying two coats of oil bound distemper using machanical means over a coat of alkali resistant primer over a coat of wall care putty (JK/Birla) to bring the surfaces even and smooth complete all as specified and directed. |
| 102 | M&L for complete removal of existing treatment surfaces from plastered or, concrete asbestos cement or stone surfaces of any description using vacuum based sanding machine and applying two coas of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) over a coat of solvent based primer complete all as specified and directed. |
| 103 | M&L for one coat of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) using vacuum based sanding machine including preparation of exiting painted surface and repairing where required with putty complete all as specified and directed. |
| 104 | M&L for applying one coat of oil bound distemper on wall including preparation of old surfaces by vacuum based sanding machine all as specified, removal of nails etc & filling cracks/ holes by applying wall care putty (multi purpose mixer shall be used for uniform and proper mixing of putty) complete all as specifeid and directed. |
| 105 | M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or gith including preparation of old painted wooden surfaces complete all as specified and directed. |
| 106 | M&L applying one coat of synthetic enamel paint on steel surfaces of any description over 10 cm width or gith including preparation of old painted steel surfaces complete all as specified and directed. |
| 107 | Taking down cement or cement lime plaster any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specifeid and directed. |
| 108 | M&L for renderning 15mm thick on brick or concrete surfaces of walls (External surfaces upto 6 storey buildings) in CM 1:4 finished even & smooth without using extra cement complete all as specifeid and directed.Note: Rates must be quoted keeping in view scaffolding requirement upto height for 6 storey buildings. |
| 109 | M&L for renderning 15mm thick on brick or concrete surfaces (Internal surfaces) other than fair faces, in CM 1:6 finished even & smooth without using extra cement complete all as specifeid and directed. |
| 110 | M&L for 10 mm thick polymer modified plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specifeid and directed.Note: SBR latex shall be measured and paid separately |
| 111 | Supply only Styrene Butadiene Rubber latex emulsion complete all as specifeid and directed. |
| 112 | S&F GI wire netting 0.9mm dia and 12 mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stanchions, beams etc incl all laps cutting and waste complete all as specifeid and directed. |
| 113 | M&L for preparation of new plastered surfaces of wall or concrete surfaces of any description and applying two coas of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) over a coat of solvent based primer complete all as specifeid and directed.Note: Rates must be quoted keeping in view scaffolding requirement upto height for 6 storey buildings |
| 114 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of wall care putty 1.00mm tk (JK/Birla) to bring the surfaces even and smooth including preparation of new plastered surfaces of wall complete all as specified and directed. |
| 115 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat on ceiling care putty 1.00mm thick (JK/Birla) to bring the surfaces even and smooth including preparation of new plastered surfaces of ceiling complete all as specified and directed. |
| 116 | Taking up or down steel tubing and connections of 15mm bore dia of pipe including cleaning for refixing or removal from site complete all as specifeid and directed. |
| 117 | Taking up or down steel tubing and connections of 20mm bore dia of pipe including cleaning for refixing or removal from site complete all as specifeid and directed. |
| 118 | Supplying and laying of 20mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specifeid and directed. |
| 119 | Supplying and laying of 25mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specifeid and directed. |
| 120 | M&L for powder coated GI T Grid system in 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm centre to center. Suspendeding the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod & leveling spring clip at 1200mm center to center cross tee, interlockined into the pre-cut slots in the main tees at 600 mm centre to center in direction perpendicular to the main tee to make a grid of 600x 1200mm. 600 mm cross tees are interlocked in the pre cut slots in the 1200mm tees at 1200 mm center to center in direction parallel to the main tee. Cross Tees having length more than 600 mm are to be supported independently. 4.5 mm thick E board or perforated type with square Edge of size 595x595 mm be placed in the grid of 600x600mm. Size of grid as speicfied by Manufacturers complete all as specifeid and directed. |
| 121 | S&F hollow PVC Wall panelling made from wood grain printed PVC or colored sheet, panels interloked with each other and fixed with wall including dismantling of existing wall panelling/boarding with fillets and rates are included dismantling and refixing of electric board,lights and switches any type any description as per specifications complete all as specified and directed. |
| 122 | S&F in repairs 3mm thick pre coated Alluminium Composite Panel cladding sheet of approved colour and shape, joint filled with silicon sealant, fixed as per manufacturers instruction complete all as specified and directed by Engr in charge. |
| 123 | M&L for 12mm thick toughned glass door end seal and fixed with stainless steel floor springs, 2nos of stainless steel handle 600mm long fancy type in each shutter fixed to glass door, heatching/flim of approved design on the glass including taking down old glass door complete all as specified and directed.Note: Floor spring and handles measured and paid separately |
| 124 | S&F 32 mm dia 600 mm long handle suitable for glass door complete all as specified and directed. |
| 125 | S&F Stainless steel body and internal machanism heavy duty concealed floor spring suitable for 12mm thick glass door 1.1 mtr span fixed on tiles or granite surface complete all as specified and directed. |
| 126 | S&F stainless steel body centre locking arragement suitable for glass door complete all as specified and directed. |
| 127 | M&L Providing \\" RAJSHRI\\" PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specifeid and directed. |
| 128 | M&L for Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with and incl SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19mmx6mm size steel screws etc Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings complete all as specifeid and directed.Note: fixture /fittings shall be measured and paid under relevant items. Make- Alstone/ Yashpoly/ Century |
| 129 | Dismantling loose concrete cover by chiselling from RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and steel scaffolding is provided and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed (Note- Including Rebar reinforcement of any dia as per requirement incl drilling, holing and welding to existing bars as directed) wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site complete all as specifeid and directed.Note: Welded mesh & addl reinforcement if required measured and paid separetlyNote :- Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to Four storey building. |
| 130 | S&F in repair Cast iron floor/nahani trap of dia 75mm/110mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 131 | M&L for resolving complaints for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc of any description any size by changing the washers (s)/jumper (s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fitting etc including replacement of major defective item if required, complete all as directed by Engineer-in-Charge. Any type of complaint related to plumber and other connected items need to be catered for by the contractor.Note:1. Contractor may have to deploy more manpower in the particular area including all necessary T&P / equipmen to resolve the complaint within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint , in addition to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill.Note :- Day to day Complaint received from user's of Palam Bagh should be resolved within 06 hours of complaint received. 4. The contractor must keep in mind the above said provisions while quoting his rates. |
| 132 | M&L for resolving complaints repair to easing of any type of Doors/Window/CupBoard shutters incl Aluminium and toughened doors by tightening of hinges /handles/ aldropbolt/ towerbolt/ knobs,hasp and staple, mortice lock etc of any size/any number of panels for easy closing/ opening or changing the positionof hinges,adjustments of tower bolts,sliding bolts, door closer incl replacement of looking mirror, floor spring, alu/rubber beadings, curtain rod etc complete including replacement of major defective item if required, complete all as specified and directed by Engineer-in-charge. Any type of complaint related to carpenter and other connected items need to be catered for by the contractor. Note:1. Contractor may have to deploy more manpower in the particular area including all necessary T&P / equipmen to resolve the complaint within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint , in addition to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill.Note :- Day to day Complaint received from user's of Palam Bagh should be resolved within 06 hours of complaint received. 4. The contractor must keep in mind the above said provisions while quoting his rates. |
| 133 | Dismantling wall and ceiling boards of any description as in panelling any thickness, including cover fillets in any surface complete all as specified and directed.Note: FOR REMOVING OF BUILDING MATERIALS OBTAINS FROM THE DEMOLITION, DISMANTLING or OTHERS ITEMS THROUGHN TO OUT FROM MOD LAND UP TO 50 TO 100 KM, NO EXTRA PAYMENT WILL BE CARRIED OUTNote: (a) Srl Item No 07.00, 08.00, 14.00 to 16.00, 23.00, 34.00 to 39.00, 43.00, 44.00, 48.00, 64.00, 68.00, 72.00, 73.00, 77.00, 78.00, 80.00, 81.00, 90.00 to 96.00, 99.00 to 103.00, 107.00 to 110.00 & 119.00 to 126.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
