|
| 1 | Schedule \\"A\\" Part – I to Schedule \\"A\\" Part – XIXNOTE: Schedule \\"A\\" Part – I to Part – XVIII are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only and for Items of Part XVIII Bidders shall insert unit Rate of each items of work in Green coloured field under Column - 6 only. |
| 2 | Lump Sum price worked out by the contractor for \\"BUILDINGS & STRUCTURES\\" as listed in Schedule 'A' Part - I |
| 3 | Price worked out by the contractor for \\"AREA DEVELOPMENT AND SOIL STABILISATION \\", as listed in Schedule 'A' Part - II |
| 4 | Price worked out by the contractor for \\"EARTH WORK AND SITE CLREARENCE \\", as listed in Schedule 'A' Part - III |
| 5 | Price worked out by the contractor for \\"INTERNAL WATER SUPPLY\\" as listed in Schedule 'A' Part - IV |
| 6 | Price worked out by the contractor for \\"INTERNAL ELECTRIC SUPPLY\\" as listed in Schedule 'A' Part - V |
| 7 | Price worked out by the contractor for \\"EXTERNAL WATER SUPPLY\\" as listed in Schedule 'A' Part - VI |
| 8 | Price worked out by the contractor for \\"EXTERNAL ELECTRIC SUPPLY & STANDBY POWER SUPPLY \\"as listed in Schedule 'A' Part - VII |
| 9 | Price worked out by the contractor for \\"SEWAGE DISPOSAL\\" as listed in Schedule 'A' Part - VIII |
| 10 | Price worked out by the contractor for \\"AREA DRAINAGE\\" as listed in Schedule 'A' Part - IX |
| 11 | Price worked out by the contractor for \\"RCC BOX TYPE CULVERT\\" as listed in Schedule 'A' Part - X |
| 12 | Price worked out by the contractor for \\"ROAD/PATH/HARDSTANDING\\" as listed in Schedule 'A' Part - XI |
| 13 | Price worked out by the contractor for \\"RETAINING WALL\\" as listed in Schedule 'A' Part - XII |
| 14 | Price worked out by the contractor for \\"HIGH SECURITY WALL/ GATE\\" as listed in Schedule 'A' Part - XIII |
| 15 | Price worked out by the contractor for \\"COMPOUND WALL\\" as listed in Schedule 'A' Part - XIV |
| 16 | Price worked out by the contractor for \\"MAIN GATE WITH WICKET GATE AND INTERMEDIAT GATES\\" as listed in Schedule 'A' Part - XV |
| 17 | Price worked out by the contractor for \\"DWARF WALL (ALONG PERIPHERIAL ROAD& INTERNAL CONNECTING ROADS AND ALONG CGASD ROAD\\" as listed in Schedule 'A' Part - XVI |
| 18 | Price worked out by the contractor for \\"FIRE FIGHTING ARRANGEMENT\\" as listed in Schedule 'A' Part - XVII |
| 19 | Price worked out by the contractor for \\"COVERED SHED OVER ENTRANCE GATE\\" as listed in Schedule 'A' Part - XVIII |
| 20 | Schedule \\"A\\" Part - XIX [Miscellaneous Items] |
| 21 | INTERNAL WATER SUPPLY |
| 22 | S&F two way bib cock 15mm bore with flange cast copper alloy chromium plated fancy type screwed for iron popes brass ferrule etc. complete all as specified and as directed. |
| 23 | INTERNAL ELECTRIFICATION |
| 24 | Supply & fixing Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 25 watt.including provn of necessary connection complete.Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equivalent make of Phillips/Havells/ Bajaj/Wipro) |
| 25 | Supply and fixing GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. |
| 26 | S & F 18\\" Exhaust Fan flameproof ,epoxy light grey,elect. Rating 16, power 230V & Air delivery 900 RPM recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 55 protection complete all as specified & directed. |
| 27 | S & F 24\\" wall mounting Fan flameproof ,epoxy light grey, 3 nos. of blade with power 230V & Air delivery 900 RPM recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 55 protection complete all as specified & directed. |
| 28 | EXTERNAL WATER SUPPLY |
| 29 | Supplying and fix Cast Iron Air Realised valve with two air Outlets,50 mm dia bore and fixing Up in GI water supply mains 50 mm dia including and jointing materials complete with rubber gasket, bolts and nuts etc. Complete all as specified and directed. |
| 30 | Supply, installation, testing and commissioning 3 phase and neutral, 415 volts indoor type, factory made CPRI approved free standing, floor mounting, dust and vermin proof cubical type, LT Panel fabricated from 2 mm thick CRCA sheet with anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade fully compartmentalized design with 4 Nos of copper bus bar of 200 Amps capacity each and supply and fixing the following :-Incoming(a) MCCB 63 A, 4 pole 16 KA-1 No (b) Ammeter 0-40 Amps 96 mm square digital type. (c ) Voltmeter --500V -01 No digital type 96 mm square (d) 01 set of 3 nos LED indication lamp Outgoing :-(a) MCCB 25 Amps 16 KA TP , 415 Volts -02 Nos (1 pumps & one spare) (d) Fully automatic star delta starter complete with contactor, relay etc of as per pump capacity. |
| 31 | Supply and fix Monoblock pump set suitable for 415 V ,3 phase system having capacity 35 metre head, and maximum discharge of 7.6 LPS including foundation and connection to Suction pipe of dia 80 mm and delivery pipeline of dia 50 mm all as specified and directed. |
| 32 | Supply and fix Foot Valve conforming to IS 4038, 80 mm dia all as specified and directed. |
| 33 | M&L for brick masonry valve pit with 230 mm thick brick wall chamber of size internally (750x750x750mm ) with Plastering in Cement mortar 1:6 10MM thick internally and externally 150mm below the G.L. with 1:6 Cement mortar 15mm thick, PCC 1:4:8 type D2 by using 40mm graded aggregate foundation of size 1300x1300 mm of 150mm thick and PCC 1:3:6 for coping of 50mm thick and covering the chamber with 40X40X6 mm thick angle iron frame and 3.15 mm thick MS Sheet as cover with two Nos of 150 mm length hinges and one No handle made out of MS round bar 10 mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 34 | M&L for brick masonry valve pit with 230 mm thick brick wall chamber of size internally (750x750x750mm ) with Plastering in Cement mortar 1:6 10MM thick internally and externally 150mm below the G.L. with 1:6 Cement mortar 15mm thick, PCC 1:4:8 type D2 by using 40mm graded aggregate foundation of size 1300x1300 mm of 150mm thick and PCC 1:3:6 for coping of 50mm thick and covering the chamber with 40X40X6 mm thick angle iron frame and 3.15 mm thick MS Sheet as cover with two Nos of 150 mm length hinges and one No handle made out of MS round bar 10 mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
