Name of Work:- PROVIDING COLOURING TO THE SHRIMANT CHHATRAPATI SHIVAJI MAHARAJ MUSEUM IN ZONE 04.
Sl. No.
Item Description
1
PROVIDING AND APPLYING INTERIOR WALL FINISH LUSTER OF ASIAN/BERGER/NEROLAC / DULUX PAINTS OR EQUIVALENT MAKE ON INTERNAL WALL SURFACE AS DETAILED BELOW SCRAPPING THE SURFACE WITH EMERY PAPER AND WIPE CLEAN. APPLYING ASIAN/BERGER /NEROLAC DUUEX PAINTS OR EQUIVALENT WALL PRIMER WITH BRUSH WITH MINERAL TURPENTINE WITH BRUSH 8 TO 10% AND OIL 15 TO 20% WITH ROLLER AND ALLOWING TO DRY FOR A PERIOD 6 TO 8 HOURS. APPLYING ASLAN /BERGER NEROLAC / DULEX PAINTS OR EQUIVALENT ACRYLIC WALL PUTTY WITH APPROPRIATE PROPORTION OF WATER ALLOWING TO DRY FOR PERIOD 4 TO 6 HOURS. SCRAPPING WITH EMERY PAPER 180 AND WIPE CLEAN. APPLYING ASIAN/BERGER/NEROLAC / DULUX PAINTS OR EQUIVALENT WALL PRIMER WITH BRUSH WITH MINERAL TURPENTINE 8 TO 10% AND OIL 15 TO 20% WITH ROLLER SCRAPPING EMERY PAPER 320 AND WIPE CLEAN, APPLYING ASIAN/BERGER/NEROLAC / DULUX PAINTS OR EQUIVALENT INTERIOR WALL FINISH LUSTER 1ST COAT WITH BRUSH/RUBBER/SPRAY WITH MINERAL TURPENTINE 7 TO 9% AND OIL WITH ROLLER 19 TO 21% AFTER 8 HOURS OF ACTIVITY APPLYING 2ND COAT OF ASLAN BERGER /NEROLAC DULUX PAINTS OR EQUIVALENT INTERIOR WALL FINISH LUSTRE WITH MINERAL TURPENTINE 7 TO 9% WITH BRUSH AND OIL WITH ROLLER 19 TO 21% AFTER ALLOWING DRY FOR THE PERIOD OF 6 TO 8 HOURS ACTIVITY. (WITH PRIOR APPROVAL OF S.E.) AS DIRECTED BY ENGINEER IN CHARGE.
2
PROVIDING AND APPLYING TWO COATS OF EXTERIOR WEATHER SHIELD PAINT OF APPROVED MANUFACTURE AND OF APPROVED COLOUR TO THE PLASTERED SURFACES INCLUDING CLEANING, PREPARING THE PLASTER SURFACE, APPLYING PRIMER COAT, SCAFFOLDING IF NECESSARY, AND WATERING THE SURFACE FOR TWO DAYS ETC COMPLETE. NOTE: FOR ITEM NUMBER 15 TO 18 PRIOR APPROVAL OF SUPERINTENDING ENGINEER WILL BE NECESSARY AS DIRECTED BY ENGINEER IN CHARGE.
3
PROVIDING & APPLYING TWO COATS OF LEAD/ZINC BASE OIL PAINT/ BITUMINIOUS PAINT OF APPROVED COLOUR TO NEW STRUCTURAL STEEL WORK AND IRON. WORK IN BUILDINGS INCLUDING SCAFFOLDING IF NECESSARY, CLEANING AND PREPARING THE SURFACE ETC. COMPLETE. (EXCLUDING PRIMER COAT).
4
PROVIDING INTERNAL CEMENT PLASTER 20MM THICK IN SINGLE COATS IN CEMENT MORTAR 1:5 WITHOUT NEERU FINISH, TO CONCRETE, BRICK SURFACE, IN ALL POSITIONS INCLUDING SCAFFOLDING AND CURING ETC. BD.L.4 PAGE NO. 368
5
PROVIDING SECOND CLASS BURNT BRICK MASONRY WITH CONVENTIONAL/ 1.5. TYPE BRICKS IN CEMENT MORTAR 1:6 IN FOUNDATIONS AND PLINTH OF INNER WALLS/ IN PLINTH EXTERNAL WALLS INCLUDING BAILING OUT WATER MANUALLY, STRIKING JOINTS ON UNEXPOSED FACES, RAKING OUT JOINTS ON EXPOSED FACES AND WATERING ETC. COMPLETE. BD.G. 1 PAGE NO. 313
6
PROVIDING AND APPLYING PLASTER / WALL PUNNING WITH PLASTER OF PARIS (WITH PLASTER OF PARIS MATERIAL OF AMBUJA / MOR CHAP OR EQUIVALENT MAKE )IN 10 TO 13 MILLIMETER THICKNESS TO PREVIOUSLY PLASTERED SURFACE / OR ON NEWLY BRICK SURFACE ( EXCLUDING ROUGH CAST PLASTER) IN ALI POSITION INCLUDING PREPARING AND FINISHING THE SURFACE SCAFFOLDING ETC. COMPLETE. AS DIRECTED BY ENGINEER IN CHARGE.
7
PROVIDING AND LAYING CERAMIC TILES HAVING SIZE 30 CM. X 45 CM. CONFIRMING TO CORRESPONDING I.S. FOR DADO AND SKIRTING IN REQUIRED POSITION WITH READYMADE ADHESIVE MORTAR OF APPROVED QUALITY ON PLASTER OF 1:2 CEMENT MORTAR INCLUDING JOINT FILLING WITH WHITE/ COLOUR CEMENT SLURRY CLEANING CURING ETC. COMPLETE. BD.M.13 PAGE NO. 386.
8
PROVIDING AND LAYING CERAMIC TILES HAVING SIZE 30 CM. X 45 CM. CONFIRMING TO CORRESPONDING I.S. FOR DADO AND SKIRTING IN REQUIRED POSITION WITH READYMADE ADHESIVE MORTAR OF APPROVED QUALITY ON PLASTER OF 1:2 CEMENT MORTAR INCLUDING JOINT FILLING WITH WHITE/ COLOUR CEMENT SLURRY CLEANING CURING ETC. COMPLETE. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
