|
| 1 | BILL NO. 1: ROAD MAINTENANCE |
| 2 | Removal of rank vegetation/weeds and undesirable vegetation from shoulders, embankment slopes upto ROW (both sides) complete in all respects including breaking of clods, rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer- In-Charge and as per Maintenance Standards Clause 3.3 (Frequency will be once in a quarter).a) Shoulders including side slopes of embankment upto toe line on both sides of the carriageway. (Frequency of cleaning will be four times in a year; however limited to only areas prone to growth of rank/ undesirable vegetation and weeds). |
| 3 | Providing spot reconditioning, reconstruction and regravelling to repair specific erosion or other damages for restoring the eroded area to originally constructed cross section on cuts and fills slopes/ shoulders conforming to Technical Specifications Clause no. 3002. Fill material should be brought from borrow areas located outside ROW conforming to Technical Specification no. 305. Watered and well compacted with plate compactor or power rammer with all leads and lifts as directed by the Engineer (Quantity of compacted Fill material to be measured on cross sectional area basis) |
| 4 | Providing slurry seal for filling of hair cracks, surface cracks and preventive/ renewal treatment as per MoRTH SpecificationClause 512. Filling of Surface cracks 1-3 mm and preventing/renewal treatment. |
| 5 | Cement pointing of any design/repair to existing pointing, with cement mortar 1:3 on all types of masonry work in super structure/sub structure as per MoRTH Specifications Clause No. 1000 & 1300. |
| 6 | Cement plaster/repair to cement plaster in thickness 12-20 mm in cement mortar 1:4 on all types of masonry works in superstructure/substructure at any height as per MoRTH Specifications Clause No. 1000, 1300 and 1400. |
| 7 | Repair to all types of damaged stone/brick masonry work in superstructure and substructure of bridges/CD works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure in cement work complete in all respects including testing etc. as directed by the Engineer conforming to MoRTH Specifications Clause no. 1000, 1300 and 1400. The rate quoted should be after due consideration of the salvage value of the dismantled material. a) Repair to brick masonry in 1:4 cement sand mortar. |
| 8 | Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 1000 metres |
| 9 | BILL NO. 2: Road Property Maintenance |
| 10 | Supplying and instalation of delinators (road way indicators) 95 cm. high above ground level total length 135 cm painted black and white in 15 cm. wide strips, fitted with 3 no.rectangular microprismatic reflective sheeting fixed on 2 mm thick aluminum sheet of size 80x100 mm one in each black strip duly riveted in the rectangular tubular section facing direction of traffic.Rectangular tubular section of size 100 mm x 50 mm x 3 mm(Thickness) .The tubular section of the delineator is encased all around with steel weldede wire mesh of thickness 2.5 mm,in size 120 mm x 70 mm x 760 mm as shown in the drawing.The welded wire mesh is painted with two coats synthetic enamal white paint after applying two coat red oxide primer. The delineator is embedded in M-15 cement concrete in pit size 300 mm x 300 mm x 450 mm .The rate quoted is for the complete job as per Drawing and direction of Engineer. |
| 11 | \\"Reflective Raised Pavement Markers (Road Studs / Cat Eye)Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylonitrite) or HIPS (Hi- impact Polystyrene) or acrylonitrile butadiens styrenc (A)\\" |
| 12 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 13 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated / Tranvers bar) Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per |
| 14 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 |
| 15 | White wash/cement paint/snowcem in two or more coats to give an even shade and smooth surface for protection of exposedconcrete/masonary portion of Bridges/CD works, kerb and wheel guard including scrapping of damage paint from old surface and repairing of the existing surface wherever necessary complete as directed by the Engineer-in-Charge. |
| 16 | a) White washing two coats on existing surface |
| 17 | b) Colour Washing two coats on existing surface |
| 18 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per Clause 8.8 |
| 19 | Providing and fixing of Manhole/Drain/Cement concrete precast slab M-20 Grade excluding the cost of HYSD Reinforcement complete as per drawing and Technical specification section 1700. |
| 20 | Supply and Fixing of Retro reflective tree plate having size 15cm x 15 cm consisting type xi retro reflective sheeting fixed over 1.5 mm thick aluminum sheet including labour ,material T and P etc.for proper completion of work. |
| 21 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing |
| 22 | BILL NO. 3: Pavement Repairs |
| 23 | Providing treatment and repair of pot holes/ruts and any depth/ patch repair of all types of bitumen pavement complete as per Technical Specification Clause 3004.2 and as per direction of Engineer by using paving grade bitumen/ emulsion/ cold ready mix material. The job includes remoyal of all failed material, trimming of completed excavation to providing firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause no. 503 back filling the patch with bituminous material as per clause no.509. Compacting trimming and finishing the surface to form a smooth continuous surface all as per Clause no. 3004.2 of Technical Specification. Please Enable Macros to View BoQ information |
