|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Group B |
| 3 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 4 | 2 x 1.5 sqmm + 1 x 1.5 sqmm earth wire |
| 5 | 2 x 2.5 sqmm + 1 x 2.5 sqmm earth wire |
| 6 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 7 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 8 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 9 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required |
| 10 | Supplying and fixing call bell/buzzer suitable for single phase, 230 V, complete as required. |
| 11 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 12 | Supplying and fixing PVC batten/angle holder including connections etc as required. |
| 13 | Supplying and fixing of 20/22 watt 4 feet energy effiecient LED tube light fitting directly on wall suitable for single phase AC 230 V complete with accessories connection etc as required. |
| 14 | Supplying and fixing of 9/10 Watt, 6500k environmental friendly, energy efficient, LED batten(Mirror light) directly on ceiling/ wall, including connections etc as required. |
| 15 | Supplying, Installation, testing and commissioning of ceiling fan 1200mm sweep ISI mark single phase 230v 50HZ and wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 16 | Providing and laying/fixing 50 mm dia (medium duty) G. I. pipe ISI marked etc as required. |
| 17 | Providing and fixing MS fan clamps of 16 mm dia MS bar bent to shape with hooked ends including welding to GI pipe, painting etc as required. |
| 18 | Dismantling of ceiling fan including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required. |
| 19 | Supplying , Installation, Testing and Commissioning of Window type Air conditioners complete with copper power cable upto 3 Mtr, wireless Remote, i/c suitable voltage stabilizer and for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing, cooling,dehumidification, air circulation, R-32/R-410A /R-407B Green Refrigerant with Scroll / rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with fixing including T&P &labouretc as required complete in all respect as specified of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in confirmation with IS 1391 Part-I 2023 and CPWD Specification. The system shall be able to deliver 100% of the rated capacity upto 42 °C.The system shall be able to operate up to 50 °C (out door ambient temperature). |
| 20 | Add Cost index @ 17% on total DSR item No. 01 to Please Enable Macros to View BoQ information |
