|
| 1 | Providing and Fixing LED 50 Watt street light with pole foundation wire switch and all accessories complete at site. |
| 2 | Providing and laying 15mm thick synthetic jogging track EPDM (9mm SBR Crumb Rubber as track bottom Cushion Layer 6mm EPDM Colour Granules top layer) of approved make COLORSPACE F/COLORPLAY/BSG/NOVAL with test reports of certified NABL lab, origin Of EPDM USA and EUROPE and equivalent. EPDM Granules shall have following minimum properties 00 Polymer content )22%, (u) Hardness of 55-65 Shore A [per ASTM D2240): (ii) Tensile Strength of )5 MPa (per ASTM D412): (iv) Elongation )500% (as per ASTM D412): (v) Density of 1.6 kg/cum (per ASTM D792). (vi) High UV rating of 3-5 on grayscale, (vi) VOC less than 3.0.0 ww/1 [viii] Combustibility less than40 mm /m: (ix) Anti-Microbial and Anti-Fungal Tested material, and shall be laid in three layers.[1] First step shall be the application of single component Polyurethane based primer coating Layer: PU binder shall have a specific gravity of 1.05 the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes 2. The second layer shall be an impact attenuating cushion layer of 9mm thick black crumb rubber/SBR adhered with a polyurethane binder and PU binder shall have a specific gravity of 1.05: the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes of to form a resilient porous layer. Crumb rubber /SBR shall be mixed with a minimum of 14% -16% of single-component PU base binder so as to ensure that PU binder provides 100% coating of the SBR/crumb rubber particles. The third step shall be laying a 6mm EPDM GRANULES top layer with at minimum 18% binder of single component polyurethane and shall provide 100% coating of the EPDM granules particles Design on the base top layer by a specialized team of installers according to the specification of approved material and shade. The detailed technical specifications of EPDM flooring material properties, application procedure, testing. etc. are attached herewith for compliance. The documentary evidence has to be produced. for the procurement of material for the manufacturer`s test certificate. An undertaking is to be furnished by the agency that surface system is tested EN 1177 For shock absorption report of SPORTS LAB approved by IAAF WORLD Athletics’ company has not been blacklisted by lAAF/Sports Authority of India/ World Athletics’IAAF means earlier `international Association of Athletics Federations or World Athletics now. The work shall be carried out by the manufacturer`s approved applicator and the prospective bidder should produce a letter from the approved manufacturer prior to submission of bid and strictly to the technical specifications and satisfaction of the engineer-in-charge. Area (sqft)=40ft×30ft=1200sqftVolume=100.33sqm |
| 3 | -Movable Badminton Pole Pair, Made of 48X48 mm square pipe, Base Pipe 6inch square , Weight 45 kg each side, adjustive Rachid with net 32 x 15 x 15 Centimeters, fine quality PU painted. |
| 4 | -Supply and Erection of LED flood light 120 Watt fitting made up of pressure die cast aluminium housing with dual optics of PC lens of each LED and front glass cover with high power LED’s, IP 66,IK07 protection 4 -10 KV SPD efficiency 110 - 120 LPW, Complete in all respect up to the entire satisfaction Engineer-in-Charge. Make: - Crompton, Phillips, Havells, Surya and Bajaj. |
| 5 | -Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge |
| 6 | -Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 25sq.mm 4Core |
| 7 | Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 16sq.mm 4Core |
| 8 | -Analysis of Rate for Sport floor-Flex Court System-8 Layers, Over the Asphalt Surface |
| 9 | Lawn Bolly boll Movable PairMovable Pole with Net120-140kg Weight can be filledMade of steel Net string should be Synthetic, wire diameter 2-3mm, Length 12.8mMake : Metco or equivalentItem Code: Metco-8153 |
| 10 | Supply and Installation of 30M Hot Dip, galvanized inside and outside in Single Dip, suitable for wind velocity as per IS 875 Part-3 Three Section Hot Dip Galvanized Pole Size Bottom 410MM and Top 150MM, Plate Thickness 5/4/3. Base Plate 640X20MM with PCD 640MM, with three Section 10.5 Mtr. with Motorized System With Gear Box and All Accessories |
| 11 | Supply and fixing of Indian National Flag Size (20X30) Feet with 100% Shiny Knitted Polyster with ReinforcedSuper Stong Nylon. With Flag Lock ( Import form Flag House |
| 12 | Supply and installation of Yellow powder coated of Fiber Decorative Dome. |
| 13 | 1 HP (Horsepower) ˜ 0.75 kW 3 phase meter, Voltage: 415V AC ±10% , Frequency: 50 Hz and RPM: Typically 1440 RPM (may vary depending on design) 6mm dia Galvanized Iron (GI) wire rope with Thimble with hook, eyelet, or wedge socket double drum, Winch Box for lifting, pulling, or positioning loads by wire rope and 3 Phase Energy Meter with all accessories |
| 14 | Earthing Roads and Fitting (40mm *1 mtr GIChemical earthing) with a backfill mixture (typically bentonite plus carbon or graphite plus minerals), which maintains moisture and enhances conductivity Hot-dip galvanized (min. 80–100 microns zinc coating) , Both ends are sealed to prevent chemical leakage and Bore a pit (150–200 mm diameter, 1.5 meters deep) |
| 15 | Supply and Installation of Red Color LED Indication pilot Lamp mounted on top of the Flag, Voltage 24V and 1.5W Power Consumption |
| 16 | Supply, installation, testing and commissioning of a complete Feeder/Control Panel Box scheduled control of electrical loads , Sheet steel fabricated, rigid, dust-proof, vermin-proof Panel, Day night sensor , CRCA Steel Sheet (minimum 14/16 SWG thickness), Powder-coated with 7-tank pretreatment process , MCB of 3P/2P/1P, 32A–10A IS/IEC 60947 |
| 17 | Supply and Installation of 5 Mtr Octagonal Pole Supporting Pole for Light with Foundation Bolts M16X450MM with Nuts andwasher with Template and civil foundation of 2/2 size |
| 18 | Supply and Installation of 350 Watt led high-lumen, energy-efficient outdoor lighting fixture designed to replace traditional metal halide or halogen lights to Focus for Flag with 2 year Warranty |
| 19 | Civil Foundation of 30M Pole including all MSRods , Cement , Dust , aggregates mixture with shattering, PCC , Footing , Soil filling and RCC foundation of (10/10) Size |
| 20 | Supply and painted of PU Paint , Thinner and Painting Charge of 30M Pole and 2 QTY of 5 Mtr Octagonal Pole Pure White Color with Best Finishing. QTY-1 |
| 21 | Supply and Laying of Aluminum Armored Cable25mm * 4 Core (Polycab) (3 Phase cable) 2.5 sqm dual core Power cable , thimbles, Lugs and other accessories |
| 22 | Transportation Charges of 30M Pole , 5M Octagonal Poles and National Flag |
| 23 | SUPPLY OF Set of 12 FOUNDATION 48` Anchor BOLTS |
| 24 | Installation Charges of Pole , Flag and Other accessories |
| 25 | Supply and installation of Civil RCC foundation of M25 grade 10/10 in Double Round Circle |
| 26 | Supply and fixing of Black Polished Granite stone Marble on round foundation Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge |
| 27 | Supply and installation of 16 Gauze SS Railing GS 304 on round about flag foundation Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement |
| 28 | 2 times High mast Pole installation service with Hydra |
| 29 | Annual Maintenance Charges all of above items for 2 years (Accident and Natural disaster not included in maintenance) |
| 30 | Supply and installation of Krishna Hand with Flute Sculpture (12 *6 feet )with Hydra and scaffolding erection , Rebraing , RCC , MS Plate , Fastener and transportation with 2 year warranty ( 450 GSM in 4 layer 8MM thickness along with UV stabilized pigment and waterproof PU acrylic color with Fully MS Frame support ) |
| 31 | Supply and installation of FRP Sankh Sculpture (6*6*11) with Hydra and scaffolding erection , Rebraing , RCC , MS Plate , Fastener and transportation with 2 year warranty ( 450 GSM in 4 layer 8MM thickness along with UV stabilized pigment and waterproof PU acrylic color with Fully MS Frame support ) |
| 32 | Supply and installation of FRP students on Globe sculpture (7 ft* 5 ft* 6 ft) with Hydra and scaffolding erection , Rebraing , RCC , MS Plate , Fastener and transportation with 2 year warranty ( 450 GSM in 4 layer 8MM thickness along with UV stabilized pigment and waterproof PU acrylic color with Fully MS Frame support ) |
| 33 | Waterproof RGB lights RGB branded Lights with wiring and Conduit Pipe with 2 year warranty |
| 34 | Supply and installation of LED light Board (ACP Board ) with the Logo of MCF and letters name of Village Jharsently ward no.1 , wiring by MS Frame and Fastener |
| 35 | All HSR Items as per DNIT Please Enable Macros to View BoQ information |
