|
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary Rock |
| 2 | Providing and laying cement concrete 1:4:8 (One cement: Four sand :Eight graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 3 | Providing and laying cement concrete 1:1.5:3 (one cement into one point five sand into three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in Foundation, footings bases of columns etc. and mass concrete. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 4 | Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in retaining walls, return walls, walls ( any thickness) including attached pilasteres,buttresses, plinth and string cources fillets, kerbs and steps etc.within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 5 | Demolishing R.C.C./PCC work manually/ by mechanicalmeans including stacking of steel bars and disposal ofunserviceable material within 50 metres lead as perdirection of Engineer - in- charge. |
| 6 | Dismantling/DEMOLITION of wooden door/windows complete as directed by EIC with delivery of serviceable material and disposal of all unserviceable material as directed by Engineer Incharge. |
| 7 | Kota stone slab flooring 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and mirror polishing etc. complete :-25 mm thick (average) slab size not less than 550mmx550mm including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 8 | Steel work welded in built up sections including hollow sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint In gratings, framed, guards, bars ladders and railing, brackets, hand rail and similar works of hollow sections including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 9 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 10 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 11 | Providing and laying Second class Brick work in super structure above plinth level upto all floor level: Cement mortar 1:6 (1 cement : 6 Coarse sand) as per Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class deodar wood including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . |
| 13 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class deodar wood including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . |
| 14 | Providing and fixing expansion hold fasteners on C.C./R.C.C./Brick masonry surface backing including drillingnecessary holes and the cost of bolt etc complete. |
| 15 | Providing and fixing anodized aluminium sliding door bolt annodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete including carriage of material in all leads and lifts (a) 300x 16 mm |
| 16 | Providing and fixing aluminium tower bolts( berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads and lifts. (a) 200x10mm |
| 17 | Providing and fixing aluminium tower bolts( berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads and lifts. (b) 150x10mm |
| 18 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.(a).100mm |
| 19 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.(b).75 mm |
| 20 | Painting two coats (excluding priming cost on new steel and other metal surfaces with enamel paint white brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matter paint complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 21 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 22 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 23 | Finishing wall with weather proof exterior grade emulsion of approved design (Apex ultima) or its eqivalant on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foeign matter etc. including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 24 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 25 | Applying birla wall putty putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 26 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 27 | Providing and fixing glass pans in door, window, ventilator shutters and partitions etc. with all necessarry screws/beeding etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of screws/ beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12 kg/ sqm) |
| 28 | Providing and laying in trenches galvanized mild steel tubes (medium grade) Jindal (Hissar) or equivalent tube fittings (earth work in trenches to be measured and paid separately) 15 mm nominal borewith including carriage of materials all leads & lifts. |
| 29 | Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cover including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 30 | Providing and fixing 10.00 ltr.capacity PVC low level flushing cistern Hind ware sleek ultra design or equivalent with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovrflow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including carriage of materials within all leads and lifts :- |
| 31 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. White Vitreous china orissa pattern W.C pan of size 580*440mm with integral type foot rests. |
| 32 | Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr(one point five meters) tube including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 33 | Providing and fixing PVC connection pipe Heavy Duty with brass union 32mm dia equivalent, as per HP.PWD specification, |
| 34 | Proving and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 35 | Providing and fixing viterous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts :)550 X 400 mm |
| 36 | Providing and fixing ISI marked high pressure PVC (finolex) of working pressure not less than 4.5 kg/sqm, waste and ventilating pipes including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. :-75 mm (seventy five mm) nominal size :- |
| 37 | Providing and fixing ISI marked high pressure PVC (finolex) of working pressure not less than 4.5 kg/sqm, waste and ventilating pipes including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. :-110 mm |
| 38 | Providing and fixing PVC (finolex) fitting and accessories, including carriage of materials within all leads and lifts :-Bends of required degree (any radius) :-110mm |
| 39 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete:-75mm nominal size. including carriage of materials within all leads and lifts |
| 40 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete:-110mm nominal size. including carriage of materials within all leads and lifts |
| 41 | Providing and fixing PVC plain bends 110mm complete in all respect. including carriage of materials within all leads and lifts |
| 42 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect.110 MM including carriage of materials within all leads and lifts |
| 43 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect.75 MM including carriage of materials within all leads and lifts |
| 44 | Providing and fixing PVC floor trap(finolex) ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 75 mm. including carriage of materials within all leads and lifts |
| 45 | Providing & fixing 100 mm dia, C.P. grating including carrage of material within all leads and lifts:- |
| 46 | Providing and fixing looking mirror of superior glass of size 600mmx450mm bevelled edged mirror on 6mm thick AC Sheet etc. including carriage of materials within all leads and lifts :- |
| 47 | Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws:- 600 X 20 mm including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges. |
| 48 | Providing and fixing C.P.brass angle valve without nuts and pipe -15mm dia :- including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges. |
| 49 | Providing and fixing G.I/M.I Union 32 (Thirty Two) millimetres diameter ISI marked , complete in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges. |
| 50 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.For 22.22 mm outer dia pipe including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges. |
| 51 | P/F CP Bib Tap 15mm dia including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges. |
| 52 | Providing and Fixing long nose angle cock/valve of CERE/JAGUAR approved quality and colour including carriage of materials within all leads and lifts.15mm dia including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges. Please Enable Macros to View BoQ information |
