|
| 1 | Excavation in foundations and trenches etc. in earth work in all lifts in all kind of soil such as pick work ,jumper work, blasting in soft/hard rock,chiseling where blasting is prohibited,stacking the excavated soil not more than 3.0 mteres clear from the edge of excavation and then returning the stackedsoil in 15cms layers,when required in to plinths sides of foundatons etc. consolidating each deposited layer by ramming and watering then disposing all surplus excavated earth as directed in all leads as directed by the Engineer in Charge. |
| 2 | Excavation in earth work and disposal of all excavated earth up to all leads and lifts, disposed earth to be levelled neatly dressed as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 3 | Providing and laying cement concrete 1:5:10(1Cement: 5Sand: 10Graded stone agg.40mm nominal size)& curing complete excluding cost of form work in foundation and plinth as per direction & to the entire satisfaction of the Engineer-in-Charge with in all leads and lifts . |
| 4 | Providing and laying cement concrete 1:3:6(1Cement: 3Sand: 6Graded stone agg.40mm nominal size)& curing complete excluding cost of form work in foundation and plinth as per direction & to the entire satisfaction of the Engineer-in-Charge with in all leads and lifts . |
| 5 | Stone soling properly hand packed filling interstics with spells and consolodation to the required gradent including and spreading watering of binding materials. |
| 6 | Steel work in builtup section i/c cutting , hoisting and placing in postiton . |
| 7 | Supplying and fixing wovenplains G.I wire rencing of mesh 50mm to 150 mm to any type of standard rails, strainging boelts etc. including provision of binding wire staples etc. |
| 8 | Manufacturing & Supplying of Fencing panel of size 1.20mx1.20 m. jali 25x25 mm mesh welded to M.S. Angle 50x50x5 mm with MS Flat cover 20x5 mm & 6Nos. Hold Fasts of ISA 40x40x5 mm including cutting. Welding and painting two coat with red oxide complete in all respect as per direction of Engineer-in-Charge. |
| 9 | P/F compound gate as per standard design i.e M.S Square pipe clamps, pintal sests with pin clamps in cement concrete block (150x30x29) size complete. |
| 10 | Painting one coat (excluding priming coat) on previously painted steel & other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. |
| 11 | wall painting two coats with acrylic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade i/c thoroughly brushing the surface clean of all dirt, dust, grease, loose pieces of scale and sand papering smooth. |
| 12 | Painting Two coat (excluding priming coat) on previously painted steel & other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. |
| 13 | White washing with lime on undecorated wall surface two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter. |
| 14 | Laying, jointing and testing in trenches to be levelled to grade galvanised mild steel pipe light grade of following nominal diameter including fittings complete in all respect to the entire satisfaction of the Engineer-in-Charge. ( Earth work in trenches to be measured and paid for separately). |
| 15 | 32mm dia |
| 16 | Providing & fixing full way valve with wheel of following diameter complete within all leads and lifts. |
| 17 | 32mm dia |
| 18 | 25mm dia |
| 19 | P/F of GI tee of following nominal diameter complete within all leads and lifts as per the direction to the entire satisfaction of the Engineer-in-charge. |
| 20 | Tee 15mm x 15mm |
| 21 | P/F of Nipple of following nominal diameter complete within all leads and lifts as per the direction to the entire satisfaction of the Engineer-in-charge. |
| 22 | 15mm dia |
| 23 | Providing & fixing of following nominal diameter complete within all leads and lifts as per the direction to the entire satisfaction of the Engineer-in-charge. |
| 24 | 15mm dia Please Enable Macros to View BoQ information |
