|
| 1 | Providig and fixing Submersible pump set (water field) of KSB/Kirloskar/Crompton/BS/Angel/ all approved make confirming to ISI Code 8034-1976 with up to date ammenments. The Pump suitable for lifting water 90.00 metre head with (+) 10% and (-) 25% head range, Single phase AC supply Motor type UMAI (S) 100 suitable for operation on 220 (+/-) 5% volts 50 cycles / second single phase AC electric supply. The discharge of pump should be 0.90 litre/Sec. at duty point complete as per the satisfaction of Engineer-in-charge with in all leads and lifts. |
| 2 | Discharge:- 2.00 LPS |
| 3 | Total Head:- 50.00 meter |
| 4 | Providing and fixing of starter (directin line) of 3 HP standard make such as L&T?MEI/Havells/Crompton/ all approved make for above pump set stable capacity installed on wooden switch board fix on a wall capable of mounting a bolt meter 0 to 300 volts capacity and amperare meter of capacity 0 t 150 amperare of standard make as per the entire satisfaction of Engineer in Charge. |
| 5 | Providing and fixing steel wire rope 6mm Thick for holding the column assembly and pump set in bore well to avoid falling of assembly and pum set in bore well including comlete arrangement of fastening etc. complete in all respect as per the direction of Engineer-in-Charge. |
| 6 | Providing and fixing MS sheet box size (0.60x0.30x0.90mm fabricated with angle iron of four legs mounted in cement concrete 1:3:6 for electric metred starter switch and other accessories with locking arrangement complete. |
| 7 | Providing and fixing M.S. Clamps to hold the pump set in the bore well including required bolt and nuts complete in all respect as per entire satisfaction of Engineer-in-charge. |
| 8 | Providing and fixing of water proof PVC Cable 3 core 2.5 sqmm of Havells/approved make as per IS-674-Part-II-1964 suitable for above pump sets from starter to pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer-in-charge. |
| 9 | Providing, lowering and jointing in bore 3 layer PP-R (Polypropylene random copolymer) pipe UV stablized and antimicroble fusion welded having thurmal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings complete ISI 15801-2010 & testing of joint complete in all leads and lifts as per direction of the engineer-in -charge. 40mm dia (PN-16.0) |
| 10 | Providing and fixing 40mm dia 3 layer PP-R male threaded adaptor fitting with in all leads and lifts and to the entire satisfaction of engineer in charge. |
| 11 | Providing and fixing 40mm dia 3 layer PP-R plain elbow fitting with in all leads and lifts and to the entire satisfaction of engineer in charge. |
| 12 | Providing and fixing 40mm dia 3 layer PP-R plain union fitting with in all leads and lifts and to the entire satisfaction of engineer in charge. |
| 13 | Providing and fixing 40mm dia 3 layer PP-R plain adopter/reducer 40x32mm fitting with in all leads and lifts and to the entire satisfaction of engineer in charge. |
| 14 | Erection Charges including labour charges, electrical connection , lowering of etc complete in all respect as per the entire satisfaction of Engineer-in-charge. |
| 15 | Excavation in foundations, trenches etc., in earth work lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres to the entire staisfaction of Engineer-in-charge with in all leads and lifts. |
| 16 | Providing, laying, jointing and testing in trenches of galvanised mild steel of following dia meter, including carriage of pipe and cost of fittings such as tee, elbow, union and nipple etc. of ISI marked and testing for leakage complete with in all leads and as per the direction of Engineer in charge (Earth work in trenches to be measured and paid for seperately) |
| 17 | 50mm dia |
| 18 | 32mm dia Please Enable Macros to View BoQ information |
