|
| 1 | Providing and fixing of aluminium composite wall panneling including cost of all materials,labour,T&P etc all complete |
| 2 | Providing fitting and fixing of 30 m thick Flush door shutter made of 30 mm thick solid core flush door shutter as per IS 2202 with 5 mm thick vision panel of 6''/9'' including cost of materials,labour,T&P etc all complete |
| 3 | Supplying , fitting , and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame shutters and all fitting and fixtures. |
| 4 | Providing glass swing door with OEL aluminium coloured frame section 9221 and coloured glass section 9206 fixed by means of tapered clip No. 4660 with 12 mm thick plain glass including cost of all materials,labour,T&P etc all complete |
| 5 | Polishing the floor surface with Red oxide,BEE waxand Turpentine including cost of all materials,labour,T&P etc all complete |
| 6 | Providing fitting and fixing of false ceiling with Aluminium anodised T section no. 3215 with 2'-0' center to center, L section No.1705 up to 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0'x2'-0' with pre laminated particle board suspended from ceiling etc complete. |
| 7 | Supplying and fixing of Roller Blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete |
| 8 | Supplying fitting and fixing of Toughened Glass of 12 mm thick approved make and quality including cost of all materials,labour,T&P etc all complete |
| 9 | Supplying fitting and fixing of structural Glazing fix with NCL sec colour PPS sections made up pre of approved make and quality inclouding cost of all materials,labour,T&P etc all complete |
| 10 | Providing and fixing of flex sign board with MS angle frame and writing letter with approved quality and make etc all complete as per direction of Engineer in charge |
| 11 | Supplying fitting and fixing of door closure of approved make and quality including cost of all materials,Labour,T&P etc all complete. |
| 12 | Fixing Kitchen Sink confirming to IS 2550: Part 5-1994 with Cast iron or M. S brackets painted White vitreous china laboratory sink 450x300x150 mm |
| 13 | Fixing of Health Fouceut with 1.0 RM PVC TeE CP Health Fouceut |
| 14 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extras ockets and jam nuts, fixing ball valve etc,i ncluding hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the EIC |
| 15 | Supplying fitting and fixing of CP fittings of approved make and quality including cost of all materials, labour. T&P etc all complete as per direction of Engineer-in-charge |
| 16 | 25 mm dia Tee |
| 17 | 25 mm dia Elbow |
| 18 | 25 mm dia Ball Valve |
| 19 | 25 mm dia Tank Nicole |
| 20 | 25 mm dia Socket |
| 21 | 25 mm dia Of Clamp |
| 22 | 25 mm dia UPVC Pipe |
| 23 | 20 mm dia PVC Pipe |
| 24 | 15 mm dia CP Bib cock Short |
| 25 | 15 mm dia CP Bib cock (Long |
| 26 | 15 mm dia C.P. Two way Bib cock |
| 27 | 15 mm C.P flange |
| 28 | 15 mm CP Extension piece 50 |
| 29 | 15 mm dia CP Hand Shower |
| 30 | 15mm dia CP pillar cock |
| 31 | 40mm dia brass stop cock/F.WV |
| 32 | 32mm dia brass stop cock/FW.V |
| 33 | 5 mm C.P/ concealed stop |
| 34 | 15 mm CP Angle stop cock |
| 35 | Overhead Shower dia100mm |
| 36 | Sink Cock with Swinging Spout |
| 37 | 125mm dia CP gratings |
| 38 | Solvent Cement |
| 39 | Teflon Tape |
| 40 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13582 TypeA, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion |
| 41 | 110 mmdia UPVC SWR Pipe |
| 42 | 75mm dia U-PVC SWR pipes |
| 43 | 75x75x75 mm dia UPVC Plain |
| 44 | 110x110x110 mm dia UPVC |
| 45 | 110x110x110 mm dia UPVC |
| 46 | 110x110x110 mm dia UPVC |
| 47 | 110x110x110 mm dia UPVC Plain |
| 48 | 110 mm dia UPVC Cowl |
| 49 | 75 mm dia UPVC Cowl |
| 50 | ELECTRICALWORKS Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 15 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire Finolex/L&T/Anchor/V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) |
| 51 | do Group A 1.2.2- |
| 52 | do Group B 1.2.2- |
| 53 | do Group c 1.2.2- |
| 54 | 40 Recessed wiring to Fan point in Group B 1.2.2-1.24.2 |
| 55 | Recessed wiring to Callbell point in Group C 1.2.3-1.24.2 |
| 56 | Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover cover in front Including providing and fixing 3 pin 5/6 amp. Modular Socket out let & S/Samp. Modular type switch.connection painting etc. as required (Separate) (1.25. 1+1.254) |
| 57 | Supply and Fixing of 5/8 Modular Switch & 3pin 5/6A Modular Socket on existing board (Existing) (1.25. 1+1.254) |
| 58 | Supply and Fixing to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required for 2 Module (1.24.1) |
| 59 | Do 2 Module |
| 60 | Do 4 Module |
| 61 | Do 6 Module |
| 62 | Do 8 Module |
| 63 | Do 12 Module |
| 64 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard). |
| 65 | 2x1.5 sqmm + 1 x 1.0 sqmm(1 |
| 66 | -do-2 x 2.5 sqmm + 1 x 15 |
| 67 | -do- 2x4 sqmm + 1 x 1.5 sqmm |
| 68 | -do-4x6sqmm +2x2.5sqmm |
| 69 | Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993) on existing surface/wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/RK (2.15.3) |
| 70 | Supply and Fixing of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 71 | Supply and Fixing of 6 way (6+18) TPN MCB DB double door (2.5.6) |
| 72 | Supply, Installation, Testing and commissioning of bulkhead fittings including fixing of 5 watt LED Lamp (Make: Havels with die cast aluminium housing and frosted glass cover) RUGBY |
| 73 | Supply and Fixing of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29-1.28) |
| 74 | Supply and Fixing of 15W LED Bulb |
| 75 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. (3.5+3.6) |
| 76 | Supply andlaying 8 SWG copper wire in recess for loop earthing as required (3.18) |
| 77 | Supply and Fixing of 48\\" A.C Cilling fan without regulator including all conections Model: Crompton (jura)/ Usha- (Striker Millenium) /Havells (Velocity/Spark) / Anchor (XL)/ Orient-(Summer Pride) |
| 78 | S/F of 24W Recess Mounted Square Shape LED luminary, Make-Havells/Crompton/Philips |
| 79 | S/F of Fan hook S, Type on ceiling. (M-22) |
| 80 | Supply, Installation. Testing and commissionioning of 225mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required. (1.43)(Make: Bajaj/Almonard) |
| 81 | S/F of computer board consisting of 3 nos. of 5 amp Modular plug and switch complete with wiring on 12M Gl.box with Front cover (1.24.9 +1.25.4 + 2.5.1) |
| 82 | S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required. (1.30) |
| 83 | S/F of 1.5sqmm mult-strand copper wire for invertor wiring |
| 84 | S/F of 6 pin 15/16A Modular socket (1.25.5) |
| 85 | S/F of 100W Step type Modular Regulator |
| 86 | S/F of 32A DP Modular Switch with Neon Indicator (Heavy Duty |
| 87 | S/F of 32A DP MCB for AC |
| 88 | S/F of 63A FP MCB |
| 89 | Supplying, placing and fixing of Godrej Mingle Conference Table with AV Integration (10 Seater) of Frame Material made of Prelaminated Twin Particle Board and Table Top Material made of MDF Board with dimensions of 3000mm x 740mm x 1150mm with termite and weather proof including cost of all materials and direction of Engineer-in-charge |
| 90 | Supplying, placing and fixing of 10 numbers Godrej make Sally Mid Back Chair with wide back rest and arm rest, adjustable lumbar support, Ergonomic seat cushion of dimension of 756mm(W) x 885mm to 985mm(H) x 756mm(D) with wheels and upholstery knitted fabric and glass filled polyprpylene and as per direction of Engineer- in-charge |
| 91 | Supplying, placing and fixing of Godrej make metal rectangular office table with 5 drawers storage, particle board table top material suitable for office of dimensions Dimensions W x H x D (mm) 1365 x 735 x 680 of rectangular shaped with lock facility and as per direction of Engineer-in-charge |
| 92 | Supplying, placing and fixing of Godrej or Durian make L shaped help desk with a flat linear table top in maple with dark grey sides, with computer tray, computer trolley and 3 drawers of varying proportion with a central locking mechnaism of size:Table Top: 1500'(L)x600'(W)x750(H), and as per direction of Engineer-in-charge |
| 93 | Supplying, placing and installing Godrej make, 4 full Shelves Iron Office Cupboard - Godrej Minor Plain of dimensions 765 mm (W) x 440 mm (D) x 1270 mm (H), 3 hinged double door Powder coated CRCA Sheet, and 3 Way bolting device and 6 lever lock safety, CRCA steel certified as per direction of Engineer-in-charge |
| 94 | Supply, installation of Stainless sign boards of high quality vinyl boanded gloss laminated multi colour (Blue, Green - White) wall mounted rectangular shape of 1.5' x 1' having thickness of 3 mm with appropriate signage and all other ancillary works and fittings as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
