|
| 1 | Comprehensive AMC of the following dia/Model of Electric pump sets for attending and rectifying the electrical mechanical defects/complaints i/c routine maintenance along with all accessories e.g rewinding of motor, repairing of pumps rep of shaft, shaft sleeve, bearing, impleller, motor bearing, NRV, Sluice valve, Starter, main Switch, Cable Vc dismantling transportation, installation, testing and commissioning after repair by necessary tools and tackles etc. as required. Installation in mix/storm water pumping stations.(a) 30 HP(SHM 150/26) for RUB Pump Station, Kirti Nagar. |
| 2 | Comprehensive AMC of the following dia/Model of Electric pump sets for attending and rectifying the electrical mechanical defects/complaints i/c routine maintenance along with all accessories e.g rewinding of motor, repairing of pumps rep of shaft, shaft sleeve, bearing, impleller, motor bearing, NRV, Sluice valve, Starter, main Switch, Cable Vc dismantling transportation, installation, testing and commissioning after repair by necessary tools and tackles etc. as required. Installation in mix/storm water pumping stations.(a) 75 HP(SHM 200/ 32 N) at 65 Block pump House. |
| 3 | Repairing of Sewage submersible pump set 5 HP-Supply of spare for 5 HP sewage submersible-wear plate |
| 4 | Contactor for 5 HP Sewage submersible |
| 5 | Distance sleeves for 5 HP Sewage submersible |
| 6 | Base plate for 5 HP Sewage submersible |
| 7 | Repairing of Sewage submersible pump set 10 HP-Supply of spare for 10 HP sewage submersible--'O' Ring set |
| 8 | Cable Grommet for 10 HP Sewage submersible |
| 9 | Lead Grommet for 10 HP Sewage submersible |
| 10 | Wear plate for 10 HP Sewage submersible |
| 11 | Mechanical seal(upper) for 10 HP Sewage submersible |
| 12 | Mechanical seal(lower) for 10 HP Sewage submersible |
| 13 | Rewinding kit (complete material i.e copper wire, varnish, cotton, insulation paper connecting lead etc.) for 10 HP Sewage submersible |
| 14 | Hardware(Nut, Bolt, washer, lifting hook, strainer etc.) for 10 HP Sewage submersible |
| 15 | Ball Bearing(upper bearing) for 10 HP Sewage submersible |
| 16 | Ball Bearing(lower bearing) for 10 HP Sewage submersible |
| 17 | Distance sleeves for 10 HP Sewage submersible |
| 18 | Oil bag kit for 10 HP Sewage submersible |
| 19 | Labour Charges for rewinding for Submersible Motor |
| 20 | Labour Charges for repairing & balancing of rotor for Submersible Motor |
| 21 | Labour charges for dismantling/assembling/testing/painting for Submersible Motor |
| 22 | Providing and fixing of M. S. Black pipe confirming to IS: 3589 Gr. 330 with packing sheets etc. as required of following dia.(a) 80 mm(4.85 mm thickness) |
| 23 | (b) 150 mm(5.4 mm thickness) |
| 24 | Supplying and fixing mild steel chequered plate 6 m thick on cable duct complete al as required at site. |
| 25 | Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-4C*50 sqmm |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 27 | Repairing of Sewage submersible pump set 15 HP-Supply of spare for 15 HP sewage submersible--'O' Ring set |
| 28 | Cable Grommet for 15 HP Sewage submersible |
| 29 | Lead Grommet for 15 HP Sewage submersible |
| 30 | Mechanical seal(upper) for 15 HP Sewage submersible |
| 31 | Mechanical seal(lower) for 15 HP Sewage submersible |
| 32 | Seal Holder for 15 HP Sewage Submersible |
| 33 | Pump Base 15 HP Sewage Submersible |
| 34 | Hardware for 15 HP Submersible Motor |
| 35 | Ball Bearing(upper bearing) for 15 HP Sewage submersible |
| 36 | Ball Bearing(lower bearing) for 15 HP Sewage submersible |
| 37 | Cable Gland for 15 HP Sewage Submersible |
| 38 | Wearing Ring for 15 HP Sewage submersible |
| 39 | PVC Cable 7 core 4 sqmm + 2 core 1 Sqmm |
| 40 | Oil for 15 HP Sewage submersible |
| 41 | Impleller for 15 Sewage Submersible |
| 42 | Labour Charges for rewinding for 15 HP Submersible Motor |
| 43 | Labour Charges for repairing & balancing of rotor for 15 HP Submersible Motor |
| 44 | Labour charges for dismantling/assembling/testing/painting for 15 HP Submersible Motor |
| 45 | Labour Charges for fixing Upper & Lower Beasring FOR 15 HP SUBMERSIBLE MOTOR Please Enable Macros to View BoQ information |
