|
| 1 | Excavation in earth work in all kinds of earth work including spade work, pick work, jumper work, B/work chiseling wedging out of rock etc. up to all lifts in earth work including dressing of sides and bed and disposing of excavated earth to be leveled and neatly dressed including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 2 | Stone filling behind retaining walls including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 3 | Providing and laying cement concrete 1:4:8 and curing complete excluding the cost of farm work for plain/ reinforced concrete in retaining walls, breast walls, as per HP.PWD. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 4 | Centering and shuttering including strutting, propping etc and removal of form work for : Retaining wall, return wall , walls (any thickness). including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 5 | Providing and laying cement concrete 1:2:4 and curing complete excluding the cost of farm work for plain/ reinforced concrete in retaining walls, breast walls, as per HP.PWD. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 7 | Steel reinforcement for RCC work including straightening, cutting, bending etc.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 9 | Half Brick masonary with burnt clay F.P.S. non modular bricks including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 11 | Providing & fixing wire gauze shutters using galvanised M.S Wire gauge of average width aperature 1.4 mm in both direction with wire of 0.63 mm dia for door window and clerestory windows with hinges and necessary screw II nd Class D/Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 12 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick 2nd Class D/Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 13 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces ofshutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 14 | Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm including carriage of materials within all leads lifts and otherincluding carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 15 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 16 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 17 | Providing and fixing Ist quality vitrified floor tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 18 | Providing and fixing Ist quality vitrified wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 19 | 15 mm cement plaster in single coat on Rough side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 20 | 6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 21 | Provding and appling white cement based putty of average thickness 1mm.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 22 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 23 | Painting steel work with Deluxe Multi surface paint to give an even shade. Two or more coat applied @0.90ltr/10sqm over an under coat of primer.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 24 | Finishing walls with textured exterior paint of required shade on new work (Two or more coats applied @3.28 ltr/10sqm over and included priming cost of exterior primer applied @2.20kg /10Sqm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 25 | Providing and fixing PVC pipes 100 mm dia for RWP ( inc all accessories)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 26 | P/L PVC Pipe 100 mm dia (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 27 | P/F PVC Door Bend 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 28 | P/F PVC Collar 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 29 | P/F PVC Door Tee 100 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 30 | P/L G.I Pipe 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 31 | P/F G.I / M.I union 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 32 | Providing and fixing PVC water storage tank syntax or equivalent three layer cost of connecting / tank nipples , making connection etc. 1000 litres capacity including all assecories. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 33 | P/F CP Brass Bib Cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 34 | P/F CP Brass Angle cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 35 | P/F CP Brass Stop Cock 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 36 | P/F Gate Valve 15 mm nominal bore (Heavy duty) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 37 | Providing and fixing CP Brass towel rail complete with CP brass bracket fixed to wooden plug with CP Brass Chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 38 | Providing and fixing CP/ S.S grating 100 mm dia Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 39 | Providing and Fixing 32 mm dia PVC waste pipe for wash basin or sink including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 40 | Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 41 | Provding and Fixing solid plastic seat with lid for pedestal type W.C. Pan.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 42 | Providing and Fixing 8mm dia C.P./S.S. Jet with flexible tube.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 43 | Proving and fixing PVC connection pipe 15mm with brass union for wah basin including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 44 | Providing and fixing CP brass soap dish with CP brass bracket fixed to wooden cleats with brass screws chrome plate including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 45 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 46 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 47 | Providing and fixing Stainless steel sink for kitchen.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
