|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) un-reinforced cement concrete up to15 cm Thickness |
| 3 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Wall Lining (PVC)& Roof ceiling |
| 4 | Dismentling of all the old Sanitary fittings 1 no toilet (i.e. 1 no.WC, 1 nos. bath tub, 1 no. cisten with jet pipe, , connections pipes , seat cover, Tissue paper Accessories, angle valves, shower, concelled, Hot water mixer, bib cocks , towel rod, Soap dishes, GI mild tubes and all other accesseries of Sanitary in the toilet.) |
| 5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal/External work - 20 mm nominal outer dia Pipes |
| 7 | Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked incl. fixing with approved adhesive etc. 110 mm dia 4.50 kg/cm2 complete Vectus or equivalent in all respect as per directions of Engineer-in Charge. |
| 8 | Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked incl. fixing with approved adhesive etc. 75 mm dia 4.50 kg/cm2 complete Vectus make or equivalent in all respect as per directions of Engineer-in Charge. |
| 9 | Providing and fixing PVC Collar, ISI marked including fixing with approved adhesive etc. complete 110 mm dia |
| 10 | Providing and fixing PVC Collar, ISI marked including fixing with approved adhesive etc. complete 75 mm dia |
| 11 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110m |
| 12 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 75mm |
| 13 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap |
| 14 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet |
| 15 | Construction for brick masonary chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size). |
| 17 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 Sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 18 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete. |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles (300x600mm) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. |
| 21 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 22 | Providing and fixing WPC board 18 mm thick for interior structure of cup board (excl. shutter) of approved brand with necessary screw etc all complete. |
| 23 | Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. |
| 24 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete: Size 50 mm |
| 25 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. |
| 26 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm |
| 27 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete: Double strip (horizontal type) |
| 28 | Providing and fixing Shower panel incl. of shower, bib cock, angle cock mixer, etc. ISI marked insertion screw and rubber washer, bolts and nuts complete incl. fixing with approved adhesive etc. 75 mm dia product name Calibre 220 mm Jaguar make Cat No. SHP-BLK-JA011 or equivalent complete in all respect as per directions of Engineer-in Charge. |
| 29 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, Calibre 220 mm Jaguar make Cat No. LYS-WHT-38851S220U or equivalent complete in all respect as per directions of Engineer-inCharge. |
| 30 | Providing and fixing vitreous china wash basin with vanity with single hole for pillar tap with C.I or M.S bracket painted white incl. cutting holes and making good the same but excl. fitting make cera product name Calibre 220 mm Jaguar make Cat No.ARS-WHT-39803 or equivalent complete in all respect as per directions of Engineer-in Charge. |
| 31 | Providing and fixing 40 mm dia, PVC waste pipe flexible (coil type) length not less than 700 mm. |
| 32 | Providing and fixing soap dish with brackets fixed to wooden cleats with screws. Jaguar make Cat No.ACN-CHR-1177 N or equivalent as approved as per direction of EIC. |
| 33 | Providing and fixing 600X450 beveled edge mirror superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 34 | Providing and fixing 600 x 120x 5 mm glass shelf with brackets and guard rail complete, fixed to wooden plugs with screws Jaguar make Cat No.AKP-CHR-37771P.or equivalent as approved as per direction of EIC. |
| 35 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 20 mm nominal bore each. |
| 36 | Providing and fixing BIb cock Jaguar make Cat No.FLR-CHR- 5047N or equivalent as approved as per direction of EIC. |
| 37 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality Jaguar make Cat No.FLR-CHR-5053N or equivalent as approved as per direction of EIC. |
| 38 | Providing and fixing Single liver mixer for wash basin Jaguar make Cat No.KUP-CHR-35011BPM or equivalent as approved as per direction of EIC. |
| 39 | Providing and fixing toilet paper holder Jaguar make Cat No.ACN-CHR-1153S or equivalent as approved as per direction of EIC. |
| 40 | Providing and fixing S.S towell rail complete with SS brackets with screw 600 x 20 mm Jaguar make Cat No.ACN-CHR-1111SM or equivalent as approved as per direction of EIC. |
| 41 | Providing and fixing Tooth brush and Tumbler holder Jaguar make Cat No.ACN-CHR-1141 N or equivalent as approved as per direction of EIC. |
| 42 | Providing and fixing Health Faucat Jaguar make Cat No.ALD-CHR-573Nor equivalent as approved as per direction of EIC. |
| 43 | Providing and fixing stop cocks Jaguar make Cat No.ALD-CHR-083 or equivalent as approved as per direction of EIC. |
| 44 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) : 25 mm nominal bore |
| 45 | Providing and fixing wall corner brackets and guard rail complete, fixed to wooden plugs with screws Jaguar make Cat No.AKP-CHR-37771P.or equivalent as approved as per direction of EIC. |
| 46 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mmwide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms |
| 47 | Providing and fixing 1000 ltrs capacity water storage tank ( plastic) with fitting complete in all respect |
| 48 | Providing and fabrication taflon frosted glass (12 mm thk) cabin in bathroom of VIP set ( 1.5X1.2X2.10) complete in all respect |
| 49 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 50 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 51 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 52 | Providing and fixing geyser complete in all respects. |
| 53 | Providing and fixing or PVC ceiling with frame of approved quality with necessary nails etc. complete in all respects. |
| 54 | Providing and febrication of water pressure pump box made of angle and MS sheet complete in all respect. |
| 55 | Providing and fixing of roller blind curtain of superior quality complete etc. complete in all respects. Please Enable Macros to View BoQ information |
