|
| 1 | Earth work in cutting or in embankment in ordinary soil excavation to be in the regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20 cm thick layers including ramming and dressing the surface to required levels and slopes and also including 1.5 mt. lift & 30.0 M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30.00 M distance as directed by the (Excluding Royalty) E.I. S.I. 253 |
| 2 | G- 3 -Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN Vibratory roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 with 45 -63 mm stone ballast as per Technical Specification Clause 404) Morth |
| 3 | P/L of factory made 80 mm thick interlocking cement concrete tiles(30mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/laying of interlocking tiles leveling and dressing of surface to requried level and slope filling joints with fine sand supply and all material labour T&P etc. all complete.(New Item-1) |
| 4 | Excavation in foundation in ordinary soil I/C lift upto 1.50 M & lead upto 30 M I/C filling, watering & ramming of excavated earth into the tranches or into the plinth and removal of surplus earth as directed by engineer in charge.S.I. no.251 |
| 5 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand{FM 2.20-3.60} : stone ballast of 40 mm nominal size) and curing complete,including supply of all material labour T&P etc. required for proper completion of the work, in foundation and floors.SI 281 |
| 6 | Laying of CC work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:1.5:3 in road surface excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.279ii |
| 7 | Cement concrete with 2 cm gauge grit approved stone ballast, approved coarse sand and cement in the proportion of 4:2:1 including supply of all materials, Labour and T&P etc. required for proper completion of the work.(S.I. No. 279i) |
| 8 | M-150 brick in 1:4 cement and Coarse sand morter in foundation and plinth including supply of all materials, labour and T& P etc. required for proper (SI No.305 |
| 9 | 12 mm thick plaster in 1:4 with cement and coarse sand mortar including supply of all materials, labour and tools & plants. required for proper completion of work. S.I. No.584(I )+Diff |
| 10 | Concrete with 4 cm.Gauge brick ballast fine sand of 1.25 FM in proportion of 1:6:12 and cement in foundation and under floors, including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.273 |
| 11 | Dismantling old existing plaster including disposal of refuse as directed by the Engineer-in charge with in a distance of 60 metre(S.I. No. 706) |
| 12 | R.C.C. work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:2:4 in beams & slabs excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.284 |
| 13 | Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work including supply of steel wastage beads, hooks and authorized overlapping shall be measured. S.I. No.504 |
| 14 | Dismantling of old damaged A.C sheets and including stacking of materials as per direction E/I DSR 15.28.2 |
| 15 | Mild steel or iron work in heavy sizes such as trusses ,built up gates,doors,frames,record racks,roof work,gates etc. wrought to required form including drilling holes,rivetting or welding where necessary and also including supply of steel, bolts , nutsetc. & fixing reduired for proper completion of the work. SI 503 |
| 16 | Dismantling cement concrete floor including stacking of dismantled materials as directed by E/I in all Complete SI No 697 |
| 17 | Dismantling Brick work including disposal of refuse as directed by the Engineer-in charge with in a distance of 60 metre(S.I. No. 692) |
| 18 | Dismentling of roof concrete including stacking of dismantled materials as directed by the Egineer -in-charge withing distance of 60 mtr SI 696 |
| 19 | Deduct Cost Of Brick |
| 20 | Deduct Cost Of Brick Bats |
| 21 | Painting two coat over priming coat (encluding cost of prime coat) on steel and other metals surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt, dust and other foreign matters sand papering and stripping including cost of all materials, labor and T&P etc. for proper completion of the work ( S.I.3i+4i) |
| 22 | Finishing walls with two coat of water proof cement paint of approved quality of previously old treated surface with this paint to give an even shade including supply of all materials ,labour,and T&P required for proper completion of the work .SI 2x662 |
| 23 | P/L glass strips 3.15 mm thick and 3.5 cm depth joints of floors skirting dado at time of laying floors flush with floor level including supply of all material labour and T&P etc. required for proper completion of work (631b ) |
| 24 | R.C.C. work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:2:4 in Raft foundation, excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.287 |
| 25 | Finishing walls with Water Proofing cement paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20Kg /10 sqm) SI 13.46.1 |
| 26 | scraping old white or colour wash including disposal of refuse as directed by E/I within distance of 60 mtr.SI 708 |
| 27 | Providing& Fixing of M.S. Wire mesh (Murga Jali) |
| 28 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineerin- Charge.D.S.R.22.22A 2023 unit rate =563.10x0.735x106/107 |
| 29 | Supply and fixing rolling shutters of approved make made of 80×120mm cold rolled M.S.latch locked through out their entire length and mounted on specially deigned pipe shall with brackets side guides and arrangement for inside and out side locking with push and pull operation complete but including the cost of top cover 1.2 mm thick and springs including all complete (S.I.520) |
| 30 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.as per Chap.14 SOR 11.41.2 Size 600mmX600mm |
| 31 | Distemper Two coat with oil bound distemper of approved brand manufacture and required shade on decorated wall surface to give an even shade over and including a priming coat with cement primerof approved brand and manufacturer as of british,shalimar,asian paints,after throughly brushing surfaces free from mortar droppings and other foreign matter and also including preparing the surfaces even also sand prepared smooth including cost of all materials on Previously old distempered surfaceSI 650+651 |
| 32 | P/F of flyproof galvanized mosquito MS wire gauge to windowsand celerestory windows using wire guage with average width of aperture 1.4mm in both directions with wire of dia.0.63mm all complete with second class teak wood beading 62x19 mm as per Chap 09 SOR 9.51.1 |
| 33 | S/F of flush door 32 mm thick commercial Quality conforming to I.S. 2202 part I (1983) including Fixing of wooden cleats and stoppers and including fixing and adjustment of hinge bolls locks handle springs fitting with necessary screws. (470i) |
| 34 | Providing wood work in frames of doors,windows,clesrestory windowsand other frames ,wrought framed and fixed in position Sal wood as per DSR 9.1.2 |
| 35 | Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231,Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the wallsand floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot restsmaterials, labour etc Chap 22 SOR . 17.1.1 |
| 36 | Cleaning work of septic tank and disposal of sludge comlete in all respect as per direction of E/I. |
| 37 | Providing and fixing of 100mm dia P.V.C down pipe including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work. (S.I 730) |
| 38 | Providing and fixing 15mm dia B Class ISI marked G.I. Pipe completes with GI Specials such as bends tee, sockets, cross, clamp etc. Earth work including filling of the trenches required for proper completion of work. The rate also includes concealed fittings wherever required cutting and making good the floor, R.C.C. and the walls etc. The rate also includes supply of all materials, labour and tools and plants etc.Chap 22 SOR 18.10.1 |
| 39 | Supplying and fixing of Brass bib cock 15 mm dia Long Body including supply of all materials, labour and tools & plants. and including threading of the pipe if required for proper completion of work Chap 22 SOR 18.15.1 |
| 40 | Supplying and fixing of Brass stop cock 15mm dia including supply of all materials, labour and tools & plants. and including threading of the pipe if required for proper completion of work Chap 22 SOR 18.16.1 |
| 41 | Providing and fixing full way gate valve15 mm dia with wheel ISI marked heavy quality including supply of including supply of all materials, labour and tools & plants. required for proper completion of work Chap 22 SOR 18.18.1 |
| 42 | Supply andFixing 6mm china white glazed in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all material labour and T&P etc. required for prer completion of the work SI 628 |
| 43 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separatelyChap.22 18.48 |
| 44 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required :17.10.2 Kitchen sink without drain board610x460 mm bowl depth 200 mm As per DSR 2023 17.10.2 unit rate =3873.80x0.735x106/107 |
| 45 | M-150 class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work..S.I. no.303 |
| 46 | M-150 class one brick thick wall brick work in 1:6 cement and coarse sand mortar in super Structure including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work. S.I. No.303+ 309+310 |
| 47 | M-150 Brick work in 1:4 one cement and 4 coarse and mortar in super structure for walls of half brick thick including necessary cutting & moulding of materials,labour and tools and plants etc. Required for proper completion of work.S.I. 305+309+310 A |
| 48 | Earth filling in plinth including supply of necessary of earth upto 3 km distance. Including watering dressing etc. Labour and T & P etc. Required for proper completion of work.(S.I 253 + cartage ) |
| 49 | Sand filling in plinth including supply of necessary quantity of sand from ganga River including watering dressing wtc. Labour and T & P etc. Required for proper completion of work.(S.I.255) |
| 50 | R.C.C work with cement approval coarse sand and 2cm gauge stone grit in proportion of 1:2:4 in lintels of door & windows excluding supply of reinforcement and its bending but including its fixing and blinding the with 24 B.W.G.G.I binding wire and excluding cost of centering and shuttering and supplyof all materials, labour and tools and plants etc. Required for proper completion of the work as per ( S.I.283 |
| 51 | R.C.C. work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:2:4 in beams & slabs excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.285 |
| 52 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in columns excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. S.I. No.289 |
| 53 | Dismantling R.c.c work including stacking of material as directed by E.I. S.I. 694 |
| 54 | Distemper Two coat with oil bound distemper of approved brand manufacture and required shade on decorated wall surface to give an even shade over and including a priming coat with cement primerof approved brand and manufacturer as of british,shalimar,asian paints,after throughly brushing surfaces free from mortar droppings and other foreign matter and also including preparing the surfaces even also sand prepared smooth including cost of all amterials SI 649+650 |
| 55 | Painting two coat over priming coat (including cost of prime coat) on steel and other metals surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt, dust and other foreign matters sand papering and stripping including cost of all materials, labor and T&P etc. for proper completion of the work.Chapter No.15 Page 36 SI 1+2+4i |
| 56 | Providing and laying Brick bat coba integal cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with waterproofing compound conforming to IS: 2645 and approved by engineer-in-charge over the RCC slab including adjointing walls up to 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5(1cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by engineer-in-charge to required Sqm - 1050.00 New B Providing and laying waterproofing treatment in sunkeri portion of WCs,Bathroom etc. by applying cement slurry mixed with waterproofing cement compound consisting of applying: a) First layer of slurry of conforming to IS:2645 and approved by engineer-in-charge to required slope and treating similarly the adjointing walls up to 300mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge. d) Finishing the surface with 20mm thick joint-less cement mortar of mix 1:4(1 cement : 4 coarse sand) admixed with waterproofing compound conforming to IS:2645 and approved by engineer-in-charge inlcuding laying glass fibre cloth ofapproved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm sq. 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.All above operations to be done in order and as directed and specifed bythe engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65mm. NOTE :- It is suggested that this method should be adopted after ensuring the structural safety of the structures New Item Chap No.11 |
| 57 | Mild steel or iron work of small sizes and sections such as holding down bolts ,hold fast ,tie rods,gratings etc.(when not included in an over all rates ) wrought to required form ,including of supply of steel ,bolts,nuts and wastage etc. and its fixing required for proper completion of work but of babrication of door and window frames including cost of hinges SI 502b |
| 58 | same as SOR item no 502 but of fabrication of grill SI 502 C |
| 59 | S/F glass pans 4 mm thick of approved quality with brand and putty for window and ventilator mann section or wherever required on other places including cartage of all itemsAs per DSR 2023 14.5.1 unit rate 1090.65x0.735x106/107 |
| 60 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2.0 cm graded approved stone shingle laid in panels finished with 3.0 mm floating coat of neat cement or cement and marble dust in 5:1 as specified and removing any overlapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper completion of the work (SI 605+analysis) with 15cm base concrete |
| 61 | 18mm thick cement plaster in dado or skirting upto 30cm in height in 1:3 consisting of one part of cement and 3 parts of app c/sand with floating coat of neat cement as per DSR2023 11.6.1 (Dsr unit rate 662.05x0.735x106/107) |
| 62 | Engraving lines in the plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by E/I including labour and all T&P etc required for proper completion of the work.SI 598 |
| 63 | Joint Filled with coarse & maxphalt etc including Supply of all materials labour T&P etc |
| 64 | 12 mm thick plaster with cement and approved coarse send in 1:3 ovet brick work minimum thickness not to be less than 3/8” 1½x1½x¼ (10 mm thick) including supply of all material labour and T&P etc. required for proper completion of the work SI No. 583 |
| 65 | P/L Neat cement punning on ceiling and R.C.C. column grouting work etc. 13.18 |
| 66 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpasteel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever D.S.R 2023 no12.50 unit rate = 738.65x0.735x106/107 |
| 67 | Cleaning of Over head RCC tank at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including disposal of rubbish as per direction of E/I complete in all respect |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints completeas per direction of Engineer in Charge.External work 15 mm nominal dia Pipes As per DSR 2023 18.9.1 Unit rate =244.70x0.735x106/107 |
| 69 | same as item no. 01 but 25 mm nominal dia Pipes As per DSR 2023 18.9.3 Unit rate =355.40x0.735x106/107 |
| 70 | same as item no. 01 but 32 mm nominal dia Pipes As per DSR 2023 18.9.4 Unit rate =438.60 x0.735x106/107 |
| 71 | same as item no. 01 but 50 mm nominal dia Pipes As per DSR 2023 18.9.6 Unit rate =794.25x0.735x106/107 |
| 72 | same as item no. 01 but 65 mm nominal dia Pipes As per DSR 2023 18.9.7 Unit rate =1674.40x0.735x106/107 |
| 73 | same as item no. 01 but 80 mm nominal dia Pipes As per DSR 2023 18.9.8 Unit rate =2166.35x0.735x106/107 |
| 74 | Making connection of G.I. distribution branch with G.I. main of followingsizes by providing and fixing tee, including cutting and threading the pipeetc. Complete 25 to40 mm nominal bore as per DSR 2023 18.13.1 Unit rate = 911.90 x0.735x106/107 |
| 75 | Making connection of G.I. distribution branch with G.I. main of followingsizes by providing and fixing tee, including cutting and threading the pipeetc. Complete 50 to 80 mm nominal bore as per DSR 2023 18.13.2 Unit rate = 1785.35 x0.735x106/108 |
| 76 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.surface box 100 mm top diameter, 160 mm bottom diameter and 180 mmdeep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plasteringwith cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finishedwith a floating coat of neat cement complete as per standard design :18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 as per DSR 2023 18.33.1 Unit rate = 10862.40 x0.735x106/107 |
| 77 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 gms AS PER DSR 2023 18.54.4 Unit rate =196.75 x0.735x106/107 |
| 78 | Providing and fixing PTMT stop cock of approved quality and colour Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms AS PER DSR 2023 18.55.3 Unit rate = 218.10 x0.735x106/107 |
| 79 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore as per DSR 2023 18.17.1 Unit rate = 622.40 x0.735x106/107 |
| 80 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore as per DSR 2023 18.17.2 Unit rate = 689.60 x0.735x106/107 |
| 81 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore as per DSR 2023 18.17.2 Unit rate = 689.60x0.735x106/106 |
| 82 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 65 mm nominal bore as per DSR 2023 18.17.5 Unit rate = 1742.15x0.735x106/107 |
| 83 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. 80 mm diameter As per DSR 2023 18.31.1 Unit rate =4495.52 x0.735x106/107 |
| 84 | Providing and fixing double headed gun-metal /S.S isi marked oblique pattern hydrant landing valve with 80 mm dia. flanged inlet and 63 mm dia. instantaneous type female outlet complete with gun-metal cap. and g.i. chain, twist release type lug and all accessories as peris:5290-1983 (type `a').(make: newage /minimax /Getech/FGE) |
| 85 | Constructing masonry Chamber 90x90x100 cm inside, in brick work incement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 as per DSR 2023 18.34.1 Unit rate = 18896.70 x0.735x106/107 |
| 86 | R.C.C. work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:1.5:3 in slabs excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.284A |
| 87 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2.0 cm graded approved stone shingle laid in panels finished with 3.0 mm floating coat of neat cement or cement and marble dust in 5:1 as specified and removing any overlapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper completion of the work (SI 605) without base concrete |
| 88 | Making drip course in sunshades with 1:3 cement and fine sand mortar as per direction of Engineer in charge including of supply of all materials ,labour,T&P etc required for proper completion of the work.SI 600 |
| 89 | Cast cement concrete door sills ,chaukhats boundry posts,shleves and similar small work with with cement approved coarse sand and2cm.gauge approved stone grit in the proportion of 1:2:4 in beams & slabs excluding supply supply of reinforcement butincludingfixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of allmaterials, labourandtools & plants. Royalty etc. required for the proper completion of the work. S.I. 282 |
| 90 | Maintenance of including filling pot holes and patch repair etc. restoration of rain cuts and dressing of side slop standing tree at adjacent to road wherever cutting of branches of tree, shurb and traimming of grass and weeds etc mentioned in GO No.55 12022/187/23-9-2022-02 Nabard / 2021 Dt 28.04.2022 & Enc letter No. 14 BDD-1 (NH)/40 MT-11/ 2024 Dated 03.01.2024 subjected to approval from Govt. maintence of 1st Year after completion of work @ Zero % of Total CC work amount of first Year @ 0.00% of Total Work Amount of CC Work area |
| 91 | Maintainance of Second Year @ 0.25% of Total Work Amount of CC Work area |
| 92 | Maintainance of Third Year @ 0.50% of Total Work Amount of CC Work area |
| 93 | Maintainance of Forth Year @ 0.75% of Total Work Amount of CC Work area |
| 94 | Maintainance of FifthYear @ 1.00% of Total Work Amount of CC Work area |
| 95 | Maintenance of including filling pot holes and patch repair etc. restoration of rain cuts and dressing of side slop standing tree at adjacent to road wherever cutting of branches of tree, shurb and traimming of grass and weeds etc mentioned in GO No.55 12022/187/23-9-2022-02 Nabard / 2021 Dt 28.04.2022 & Enc letter No. 14 BDD-1 (NH)/40 MT-11/ 2024 Dated 03.01.2024 subjected to approval from Govt. maintence of 1st Year after completion of work @ Zero % of Total Interlocking work amount of first Year @ 0.00% of Total Work Amount of Interlocking area |
| 96 | Maintainance of Second Year @ 0.25% of Total Work Amount of Interlocking area |
| 97 | Maintainance of Third Year @ 0.50% of Total Work Amount of Interlocking area |
| 98 | Maintainance of Forth Year @ 0.75% of Total Work Amount of Interlocking area |
| 99 | Maintainance of FifthYear @ 1.00% of Total Work Amount of Interlocking area Please Enable Macros to View BoQ information |
