|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, all depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 2 | Pipes cables etc. not exceeding 80mm dia as per DSR No. 2.10.1.1 |
| 3 | Pipes cables etc. exceeding 80mm dia but not exceeding 300mm dia as per DSR No. 2.10.1.2 |
| 4 | Brick work with common burnt clay F.P.S. (non plinth level up to floor V level in all shapes and sizes in : |
| 5 | Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2 |
| 6 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4.1 |
| 7 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 8 | 12 mm cement plaster of mix as per DSR 13.1 |
| 9 | 1:4 (1 cement: 4 fine sand) as per DSR 13.1.1 |
| 10 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 13.7.2 |
| 12 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 13 | W.C. pan with ISI marked black solid plastic seat and lid DSR 17.3.1 |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 15 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.2 |
| 16 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge DSR 17.16A |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete |
| 18 | Flexible pipe |
| 19 | 32 mm dia DSR 17.28.2.1 |
| 20 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (EXPOSED) |
| 21 | 20 mm dia nominal bore DSR 18.10.2 |
| 22 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 23 | 15 mm dia nominal bore DSR 18.11.1 |
| 24 | 20 mm dia nominal bore DSR 18.11.2 |
| 25 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality |
| 26 | 20 mm Nominal bore DSR 18.17.1A |
| 27 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 28 | 20 mm DSR 18.18.2 |
| 29 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 30 | 45 cm length |
| 31 | 15 mm nominal bore DSR 18.21.2.1 |
| 32 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 33 | 15 mm nominal bore DSR 18.46.1 |
| 34 | 20 mm nominal bore DSR 18.46.2 |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 36 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 37 | 15 mm nominal bore DSR 18.49.1 |
| 38 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore DSR 18.51.1 |
| 39 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 40 | 15mm nominal bore DSR 18.53.1 |
| 41 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. DSR 18.53A |
| 42 | Cutting holes up to 30x30 cm in walls including making good the same |
| 43 | With common burnt clay F.P.S. (non modular) brick DSR 18.76.1 |
| 44 | Providing and fixing of angular stop cock with wall flange 15mm i/d coloured \\"Jaquar\\" make \\"Continental\\" or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 45 | Providing and fixing Angular Stop Cock Make Jaquar Range Opal Model OPL-15053 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 46 | Providing and fixing of C.P. Towel Ring Square with round flange complete, make Jaquar range Continental or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 47 | Providing and fixng of CP soap dishmake Jaquar / continental or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 48 | Providing anf fixing of CP cup heavy duty complete in all respect as per entire satisfaction and approval of make by EIC. |
| 49 | Providing and fixing mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats steel studs complete in all respect |
| 50 | Providing and Fixing Chinaware Counter Top Basin 600 x 400 x 160 make Jaquar / CERA / Kerovit / Hindwareor equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 51 | Provd & fixing of C.P. Towel Rail 450 mm long make Jaquar Continental or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 52 | Providing and fixing of Overhead Shower 125mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System Make jaquar OHS-1989 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 53 | Providing and fixing of Shower Arm 300mm long Round Shape for Wall Mounted Showers with Wall Flange Make Jaquar SHA-479L300S or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 54 | Providing and fixing of CP toilet paper holder make Jaquar Continental or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 55 | Providing and fixing of CP tumbler holder make Jaquar Continental or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 56 | Providing and fixing of Glass corner self make Jaquar Continental or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 57 | Providing and fixing of CP towel rack with lower hangers make Jaquar Continental or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 58 | Providing and fixing of single lever basin mixture without pop up waste system with 450 mm long braid complete make Jaquare OPAL PRIME or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 59 | Providing and fixing of sink mixture with swinging spout on upper side wall mounted model with connecting legs and wall flanges make Jaquare floratine or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 60 | Providing and fixing of sink cock with swinging spout on upper side wall mounted model with connecting legs and wall flanges make Jaquare floratine or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 61 | P/F of chinaware One Piece Floor Mount EWC complete with Cistern, Seat Cover and Twin Flush Fittings of make CERA Model CRUSE/CAMBELL (Seat 2038/2099, Cistern 2118, Seat Cover 2328B, Twin Flush Fitting 2218 ) or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 62 | Providing and fixing of colour WHB (630x450mm) and Pedestal of M-cera make with C.I brackets 32mm C.P. brass waste of approved make as per standard pattern including cutting and painting of brackets and making good the walls CAT No. 1022 & 1121 (Concord with Pedestal) or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 63 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" dia of approved make |
| 64 | Providing and fixing Wall mixer 3 in 1 with provision for both hand shower and overhead shower with connecting leg complete make Jaquar Ornamix Prime-or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 65 | Providing and fixing concealed stop cock complete with internal part body make jaquar opal prime 15083KPM + 083 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 66 | Supplying and fixing of Monoblock pump set 1 H.P. make Crompton with required platform and electricla wire complete in all resects or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC Please Enable Macros to View BoQ information |
