|
| 1 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).as per SI no 697 |
| 2 | Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) incl 3.00Km cartage. |
| 3 | Disposal of Dismantling cement concrete materisl of road with cartage soil from 3.00 K.M. Distance. As per SI no 231a MORD (II)+261 b+Cartage of 2nd km -si no. 231(a)+Cartage of 3rd km -si no. 231(a) |
| 4 | Construction of Granular Sub Base by providing Well graded material, spreading in uniform layers with Motor grader/Tractor mounted appropriate equipment on prepared surface, mixing by mix in place method with Rotavator at OMC and compacting with Smooth wheel roller to achieve the desired density complete as per Technical Specification Clouse 401 |
| 5 | Providing, laying, spreading and compacting Stone aggregates of specific sizes to Water Bound Macadam (WBM-G-III) specification incl spreading in uniform thickness, hand packing , rolling with three wheel 80-100kN static roller in stage to proper grade and camber , applying and brooming , crushable screening to fill up the interstices of coarse aggregate , watering and compacting tothe required density Grading 3 as per Technical Specification Clause 405. |
| 6 | Supply & Fixing 80 mm thick Precast cement concrete I-Shape interlocking paver block a with top layer of minimum 8mm thickness having plan dimension 200x(160+120mm)of O.P.cement, Smooth high gloss finish, skid reditant.manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrere paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS; 15658-2006 with a 4 cm thick layer of fine sand including cost of material,labour, T & P TAXES etc requried for proper completion of the work as directed by Enginner-in-charge..(CH-23, S.I.No.New Item -05 ) |
| 7 | Concrete with 4cm. Guage Stone ballast fine sand of 2.20 F:M. and cement in proportion of 12:6:1 in foundation, Sub base and under floors including supply of all meterials, labour and T&P etc. required for proper completion of work.S.I.No 281(a)+New(Rate As per S.O.R.- Rampur Circle).(Rate sanction As Per S.E. Moradabad Letter No 613 /29-09-2025, Item No-02) |
| 8 | M-150 brick work in 1:4 (one cement and Four coarse sand of 1.25 F.M.mortar) in foundation and plinth including supply of all meterials, labour and T&P etc. required for proper completion of work. S.I. No. 305 |
| 9 | 12 MM thick Plaster with one part of cement and four part of approved corse sand mortar 2.25 fm over brick work including supply of all marerial labour taxes T&P etc. Required for proper completion of the work S.I.no. 584 |
| 10 | Cement Concrete with 2cm. guage approved stone grit coarse sand and cement in proportion of 4:2:1 including supply of all materials,labour and T&P etc. required for proper completion of work. S.I. No. 279A |
| 11 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.5:3 in lintels of doors, windows and sunshades excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work.Binding wire of supplied by the contractor free of cost.S.I.No 284A |
| 12 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and.S.I.No 504 As Per S.O.R Moradabad |
| 13 | S/F Information /sign board i/c all comp. at site.made by Angle Iron 35x35x5mm and 1mm thick M.s Sheet and fixed at site. Please Enable Macros to View BoQ information |
