|
| 1 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Wiring for light point /fan point/exhaust fan point/call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed PVC conduit with modular switch,modular plate,suitable G.I.box and earthing the point with 1.5sq.mm.FRLS PVC insulated copper conductor single core cable etc. asrequired, complete in all respect.Group C |
| 3 | Wiring for circuit/submain wiring alongwith earth wire with 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable surface/ recessed medium class PVC conduit. |
| 4 | Wiring for circuit/submain wiring alongwith earth wire with 2x2.5sq.mm+1x2.5sq.mm of FRLS PVC insulated copper conductor,single core cable in surface/recessed medium class PVC conduit as required. |
| 5 | Same as above item no 3 but for 2x6.0sq.mm+1x6.0sq.mm earth wire |
| 6 | S/D of 1x1.5sq.mm FRLS PVC insulated copper conductor single core cable in existing surface/recess PVC conduit.Complete in all respect. |
| 7 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable . |
| 8 | S/F of modular type 5/6 amps switch on the existing switch board,complete in all respect. |
| 9 | Same as above but for 3 pin 5/6 amps socket ,complete in all respect. |
| 10 | S/F of suitable size GI box with modular plate & cover in front and 6 pin 5/6 & 15/16 amps modular switch and socket on surface or in recess,complete in all respect. |
| 11 | S/F of 3 pin,5 amp.ceiling rose on the existing jonction box,including connection etc.as required. |
| 12 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. |
| 13 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C |
| 14 | S/F of single pole and neutral,sheet steel,MCB distribution board, 240 volts,on surface/recess 8 way double door,complete in all respect. |
| 15 | S/F of single pole and neutral,sheet steel,MCB distribution board, 240 volts,on surface/recess 12 way double door,complete in all respect. |
| 16 | S/F of single pole 5amps. to 32 amps.rating 240/415 volts,\\"C\\" series ,miniature circuit breaker,complete in all respect. |
| 17 | Supplying and fixing 63A rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.As required. |
| 18 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) |
| 19 | Supply and laying of 70 sq. mm 3-1/2 core Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Volts grade on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properlyconnected with the earth conductor by clamps etc. |
| 20 | Supply and laying of 150 sq. mm 3-1/2 core Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properlyconnected with the earth conductor by clamps etc. |
| 21 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrodeterminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 22 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board Cat. B. Pannel Cubicle Type Incoming200Amp. MCCB-1 Nos. Outgoing 100 Amp. MCCB-1 No & 63 Amp. MCCB-3 Nos.Nos.Cat. B. Pannel Cubicle Type |
| 23 | Supply and fixing hexagonal/ Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet Complete in all respect. |
| 24 | S/F of electronic fan regulator 120-280 V.ISI marked on the existing switch board ,complete in all respect. |
| 25 | Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect..CAT- AA |
| 26 | S/F of LED tube light fitting with batten for 1x22 watt.LED tube light ,complete in all respect. Catt.AA |
| 27 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52Watt to 70 Watt. Confirming to IP66 and above Protection complete in all respect. CAT- AA |
| 28 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 70 to 90 Watt. Confirming to IP 65 protection complete in all respect.CAT- AA |
| 29 | S/F of ceiling fan with 1200mm sweep having double ball bearing with reputed make(bajaj, Orient in all respect. |
| 30 | S/F of 230 mm light duty exhaust fan,complete in all respect. |
| 31 | AMARON E+--AMARA RAJA POWER SYSTEMS LIMITED DC Electric Vehicle Charging Station >30 kW<=60 kW CCS2 (Combined Charging System)AMARON E+UR Unregistered BrandManufactured by: AMARA RAJA POWER SYSTEMS LIMITED (DC FC 60KW) |
| 32 | SITC of 5 MP IP Bullet ,Resolution 5MP 2880(H) x 1620(v), IR Range: Up to 50M ,Audio Built-in microphone, Triple-Stream (Main/Sub/Third) SD Card Slot up to 256GB , Multiple AI Support, Alarm & Audio: 1/1 Metal, Smart Feature IP67 Sub stream@30fps 720P (1280x720), VGA (640x480), QVGA (320x240) Third stream@30fps VGA (640x480), QVGA (320x240) Face Recognition (FR), Human & Vehicle Detection (PD & VD), Perimeter Intrusion Detection (PID), Line Crossing Detection (LCD), Cross Counting (CC), Stationary Object Detection (SOD), Heat Map (HM), Crowd Density Detection (CD), Queue Length Detection (QD), Rare Sound Detection (RSD) |
| 33 | SITC of 5 MP IP Dome ,Resolution 5MP 2880(H) x 1620(v), IR Range: Up to 50M ,Audio Built-in microphone, Triple-Stream (Main/Sub/Third) SD Card Slot up to 256GB , Multiple AI Support, Alarm & Audio: 1/1 Metal, Smart Feature IP67 Sub stream@30fps 720P (1280x720), VGA (640x480), QVGA (320x240) Third stream@30fps VGA (640x480), QVGA (320x240) Face Recognition (FR), Human & Vehicle Detection (PD & VD), Perimeter Intrusion Detection (PID), Line Crossing Detection (LCD), Cross Counting (CC), Stationary Object Detection (SOD), Heat Map (HM), Crowd Density Detection (CD), Queue Length Detection (QD), Rare Sound Detection |
| 34 | Resolution 12MP, 8MP, 5MP, 3MP, 2MP(1080P), 1.3MP(960P), 1.0MP(720P), 4K:240fps ,4MP:480fps ,2MP:960fpsAudio: G.711A/G.711U ,Video : H.264/H.265/H.264+/H.265+, Max 16CH playback ,Face Detection, Pedestrian Detection ,Vehicle Detection,Cross Counting , Heat Map Crowd Density Detection, Perimeter Intrusion Detection , Line Crossing Detection , Queue Legth Detection, License Plate Detection , Rare Sound Detection , 2 RJ45 100/1000 Base-T, 2 SATA HDD, up to 18TB (Enterprise-Class) , |
| 35 | SITC of 210 Megabytes Per Second, enables recordings from up to 64 HD cameras for smooth, uninterrupted footage. Support an increased number of HD cameras and allows longer data retention periods. |
| 36 | SITC of L2+ managed industrial PoE switch with 4*10/100/1000M RJ45 ports and 2*100/1000M SFP slot ports, Port 1-4 can support IEEE802.3af/at PoE. Switching capacity of 128Gbps, forwarding Rate 8.93 Mpps, having 4 x 10/100/1000BASE-T PoE-plus(RJ45) with maximum PoE output power is 60W (at-120W) , with 2*100/1000Base-X uplink SFP slot ports., 8K MAC address. Should have Static Routing, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), and Ipv6 features from day 1. |
| 37 | SITC of Indoor 4 U Rack suitable for LIU ,PDU & Switches |
| 38 | SITC of Screen Size – 55 inches Resolution- FHD 1080p |
| 39 | SITC of RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors of 100pcs/Pack |
| 40 | SITC of Cat 6A Patch Cord UTP unshielded LSZH 24AWG Patch Cord, Diameter < 6.2mm, 2 Meter, Operating Temperature -20 to +60 DegC. Patch cord 1 Mtr for rack side switch to jack panel connectivity. |
| 41 | SITC of Hand Made 5 ampere 4 socket Electric switch Board |
| 42 | SITC of 2 K va JUMBO Inverter With 2 150 AH Battery 24 Month Replacement 2 hour Battery Backup |
| 43 | SITC of 35mm pvc pipe 6 meter length |
| 44 | SITC of 25 mm pvc pipe 6 meter length |
| 45 | (A) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft,mechanical seal conforming to IS 1520. (C) Suitable HP Squirrel cage induction Motor ,TEFC, synchronous speed 1500 RPM suitable for operation on 415 V , 3 Phase 50 Hz AC supply with IP 55 protection for enclosure , horizontal foot mounted type with class F insulation , conforming to IS 325 (D) MS Fabricated common base plate ,coupling, coupling gaurd, foundation bolts etc required. (E) Suitable cement concrete foundation dully plastered with anti vibration pads. |
| 46 | 1620 Ipm at 58 m Head |
| 47 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto startingmechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thickaluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required (D) MS fabricated , common base plate , coupling, coupling gaurd , foundation bolts etc as required (E) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 48 | 1620 lpm at 56 m Head |
| 49 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required (D) MS fabricated ,common base plate , coupling, coupling gaurd , foundation bolts etc as required. (E) Suitable cement concrete foundation dully plastered with anti vibration pads. |
| 50 | 180 lpm at 56 m Head |
| 51 | control panel fabrication supply installation and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 02 mm thick CRCA sheet compartmentalised with hinged lockable doors dust and vermin proof powder coated of approved shade after 7 tank treatment process cabel alley inter connection with suitable size copper conductor cbale /solid copper strip having switchgears and accessories mounting and inernal wiring earth terminals numbering etc complete in all respect suitable for main fire pump pressurisation pump and diesel pump set complete as CPWD specification with following in coming and outgoings suitable for operation on 415V,03 Phase,50 Hz AC supply with enclosure protection class IP 42 AS required MAIN FIRE PUMP Fully automatic star/delta starter suitable for 60 hp pump with overload protection current sensing type single phase preventor complete witha all asscessries and internal wiring required for auotmatic operation, selector switc for local/remote,auto/manual/off operation. JOCKEY PUMP Suitable hp fully automatic Fully automatic star/delta starter suitable with overload protection current sensing type single phase preventor complete witha all asscessries and internal wiring required for auotmatic operation, selector switc for local/remote,auto/manual/off operation. DIESEL ENGINE CONTROL Automatic/manual selctor switch and 03 attempts strarting device timer and relays as required push bottoms,start/stop in manual mode indicating lamp for hight /low lub oil pressure high water temp and engine on indication batter charger suitable for 12v /24 v DC with Boost and trickle selectior switch |
| 52 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 3589/ IS 1239 including welding , fittings, like elbow , tees, flanges, tapers, nuts bolts, gaskets etc and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enameal paint of requred shade complete as required. |
| 53 | 150 mm dia |
| 54 | 100 mm dia |
| 55 | 80 mm dia |
| 56 | 50 mm dia |
| 57 | 25 mm dia |
| 58 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 59 | Single Headed Stainless Steel |
| 60 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes asrequired : |
| 61 | 80 mm dia |
| 62 | 100 mm dia |
| 63 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber washers etc.as required : gasket, GI bolts, nuts |
| 64 | 100 mm dia |
| 65 | 80 mm dia |
| 66 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valvewith required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 67 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 68 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636(type-A) as required |
| 69 | Stainless Steel ( Grade 304) |
| 70 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : |
| 71 | Stainless Steel ( Grade 304) |
| 72 | providing ,installation,testing and commissioning of stainless steel Y-Strainer fabricated out of 1.6 mm thick stainless steel grade 304.sheet with 03 mm dia holes with stailess steel flange |
| 73 | 100 mm dia |
| 74 | Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators (rubber bellow) suitable, Working pressure required PN 16. with nuts .bolts ,washer,gaskets |
| 75 | 50 mm dia |
| 76 | 80 mm dia |
| 77 | suppling and fixing of fire brigade connection of cast iron body iwht gun metal male instantaneous inlet coupling complete with cap and chain as reqd. for suitable dia ms pipe connection conforming to IS 904 as Required |
| 78 | 04 way - 100 mm dia M.S. Pipe |
| 79 | providing fixing testing and commissioning of 15 mm dia quartzoid bulb type sprinklers of rating 68 degree centtigrade with required accessories |
| 80 | pendent sprinkler |
| 81 | suppling installation testing and commissioning of sprinkler flexible pipe UL Listed of stainless steel complete with 15 NPT on reducer thread with maximum working pressure 175 psi test pressure of 875 PSI Burst with branch line inlet 25 mm NPT male thread to sprinkler head oulet 15 mm NPT Female thread with reducer nipple 2 side brackets center bracket stockbar of following sizes complete as required |
| 82 | 1200 mm |
| 83 | providing installation testing and commissioning of adjustabe rosette plate for 15 mm dia in white finish UL Listed or FM approved complete as required |
| 84 | Providing fixing testing & commissioning of Draw Out Connection for fire fighting systems comprising of gun metal connectior with 80 mm outlet and 100 mm flange flat faced outlet (PCD 185 mm Holes 08 Nos x 20 mm dia flg:220 mm OD X12 mm Thikc |
| 85 | Supply,Testing after excavation and refilling of trench along with providing 4mm thick coating for underground pipe after applying wrapping coating primer as required as per direction of Engineer-in- charge |
| 86 | ABC Powder Type (Stored Pressure) Fire Extinguisher 9 Kg. Capacity ISI MarkIS:15683 operating temperature (+5)°C to (+55)°C for Class 4A type of fire filled with MAP Powder Complete in all respect |
| 87 | CO2 Type Fire Extinguisher 4.5 Kg Capacity ISI Mark IS:15683 operating temperature (-30)°C to (55)°C for Class 13B type of fire fitted with 1 Mt. Hose & PVC Horn Complete in all respect. |
| 88 | Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-incharge. |
| 89 | Providing & fixing (100 mm dia) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI cost shall be of inclusive of providing any short pieces, nipples, elbows etc as required. having calibration of 0-20 Kg/cm2. |
| 90 | Providing ,Fixing and Installation M/Foam (Cartridge Type) Fire Extinguisher 9 Lt Capacity ISI Mark IS:15683 operatingtemperature (5)°C to (+55)°C for Class 4A & 34B type of fire complete , Complete in all respect. |
| 91 | Providing , fixing and Instalaltion ABC Modular Type Fire Extinguisher 10 Kg. Capacity filled with MAP 70% ABC PowderComplete in all respect |
| 92 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 93 | supplying ,fixing First -Aid Hose Reel With MS Contruction spray painted in post office Red, Conforming to IS 884 Complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type-2 as per IS:1285 20 mm Nominal Internal dia gun metal globe valve and nozzle drum and brackets for fixing the equipment on wall connections from riser with 25 mm dia stop gun metal valve and M.S.Pipe and Socket |
| 94 | suppling installation testing and commissioning of heat detector operating at 54 c / 57 c with rate of rise cum fixed temperature dual thermistor type with mounting base complete with all connection etc as required |
| 95 | Suppling installation testing and commissioning of smoke detector with builtin LED and Mounting base complete with all connections etc as required |
| 96 | suppling installation testing and commissioning fire alarm sounder with facility to make annoucement mounted in A.B.S. Box iwht hinged cover plate and suitabel for operation with amplifier i/c line matching transformer etc complete as required |
| 97 | Suppling Instalaltion testing and commissioning of manual call box of ABS type in surface/Recess with stainless steel chain and hammer assembly complete with glas and push button etc. as required |
| 98 | suppling installation testing and commissioning sector panel suitable for following zones. Complete with visual indications for short cruit fault open circuit fault fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered complete with all connections,interconnections as required |
| 99 | 04 zone |
| 100 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/Recess including cutting the wall and making good the same in case of recessed conduit as required |
| 101 | 25 mm |
| 102 | supplying and drawing following sizes of FRLS PVC Insulated copper conductor single core cable in the existing surface/recessed stee; /PVC Conduit as required |
| 103 | 1 x 1.5 sq mm |
| 104 | Supply,Installation,Testing and Commissioning of ongrid Solar complete as required:- a)Solar Photovoltaic Module of capacity 330W porabove,manufactured in India,conforming to IS14286/IEC61215, IS/IEC61730-Part-1.IS /IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be lessthan16.5%. PV modules used in solar power plants/systems must be warranted for their output peak watt capacity,which should not be less than 90% at the end of 10years and 80% at the end of 25 years. b)Power Conditioning Unit (PCU) of 350-800V DC Input voltage range and 400VAC, threephase, 4wire,50Hz+/-2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion lessthan 3% and suitable for ambient temperature from 0to50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.c) Data Monitoring System complete with accessories. d)Fixing of Array junction box & Main junction box with IP65 protectionan dtermination arrangement for incoming and outgoing cable along with glands,lugsand other accessories etc. as required.e) Lightning and surge voltage protection. f)Connections & Interconnections bysupplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main powercable to grid supply PCU unit alongwith supplying & fixing of necessary channel/conduit lugs and other accessories etc. asrequired. Please Enable Macros to View BoQ information |
