|
| 1 | Electrical Items : |
| 2 | Wooden PartitionProviding and fixing of 75mm thick Wooden Partition comprising of 50 X 25mm aluminum studs, spaced at 600mm C/C both horizontally and vertically and clad 12mm plywood board for inner layer for above partition match to the existing wooden partition including all accessories complete as per ADA instructions. |
| 3 | Glass DoorProviding and Installing of Toughened Glass Door fitted on Existing fittings, glass panes shall be formed out of 12mm thick toughened glass. Cost including Frosted film, wastage, patch cut out, glass hole, Transportation, shifting. Size: 2090mm (H) x 1045mm (W) x 1nos. (Approx. 24 sqft) Providing and Installing of Floor spring, Top and Bottom Patch, Pivot Set, Lock with handle set etc complete as per ADA instructions. |
| 4 | False Ceiling TilesProviding and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non-combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and L- sections suitably fixed according to tile size as per direction of Engineer-in-charge. |
| 5 | PaintingWall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour of two coats (if required) |
| 6 | Anti-Static FlooringSupply and laying of 2 MM thick homogeneous Antistatic PVC flooring, fixed using suitable SR solution and edges/joints welding, after surface preparation of exist tile flooring, all as per OEM specifications. The flooring should meet the properties of control generation, accumulation and dissipation of static discharges. The work shall be carried out as per the site conditions inclusive of wastage. |
| 7 | Aluminum PartitionProviding, fabricating & Installation of Full height Aluminum Partition including 02 Nos of doors. All the Vertical & Horizontal members shall be powder coated AL Sections of size 65 x 40 x 1.2 mm heavy gauge forming a grid as per drawing enclosed. The partition shall be rigidly fixed to wall / Ceiling / floor, etc for stability, the filler material shall be 05 mm thick clear glass or pin head glass fixed using AL snap fit clips, rubber gaskets, etc complete as per samples available at ADA. |
| 8 | FURNITURE TABLE WITH ERU+PED (Table for Sc-F)Supply & Installation of Desking -Premium suite of size 180*210*75 cm (Main Table +ELU+PED). Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top soft closing access flap with in-build power box are provided on work surface for wire managementSecondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestals are provided with lock for security. |
| 9 | HIGH BACK CHAIR WITH COAT HANGER (High Chair for SC-F)SEAT/BACK ASSEMBLY: The seat is made up of 1.2 * 0 fern thick hot-pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area.* SEAT SIZE (Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D)* SEAT SIZE (Standard Seat Depth) 47 0 cm. (W) x 49.5 cm. (D) ” BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (M)HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m\\"\\" and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS: The adjustable armrest is designed with the following features» Up-Down adjustment— 8 steps (8. 0+0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in height. FRONT PIVOT SY!’JCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. |
| 10 | MB Chair for Sc FSupply of MID BACK CHAIR of Overall Dimensions shall be Chair-Seat Height - min 43.3cm to max 54.3cm. Height - min 89.5cm to max 100.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3cm and Depth- 76.3cm Seat assembly: The seat assembly shall be made up of 1.2 ±0.1cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. Seat size: 47.0 cm. (w) x 48.0 cm. (d) Back assembly: The back assembly. shall be made of powder coated (oft 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2±0.016cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using double layer spacer mesh fabric with high tenacity yarn. Back size : 46.5 cm (w) x 60.5 cm (h).High Resilience (HR) polyurethane foam: The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. Armrests: The one-piece armrests shall be injection moulded from black co-polymer polypropylene. Centre-Tilt mechanism: The mechanism shall be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • upright position locking. tilt tension adjustment. Pneumatic height adjustment: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.Telescopic bellow assy: The bellow shall be 3 piece telescopic type and injection moulded in black polypropylene. Pedestal assembly: The pedestal shall be injection moulded in black 33% glass-filled nylon 66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. Pitch-center dia. (76.3 ±1.0cm with castors.)Twin wheel castors: The twin wheel castors shall be injection moulded in black nylon etc. |
| 11 | MID BACK CHAIR (PA/CA)Supply of Mid Back Chair of size shall be: SEAT SIZE (Larger Seat Depth): 47.00cm (W) x 51.50cm (D), SEAT SIZE (Standard Seat Depth) 47.00cm. (W) x 49.50cm.(D), BACK SIZE: 45.00 cm(W) x 65.3cm(H). The seat shall be made up of 1.2 + 0.1cm thick hot pressed plywood. The Back shall be made up of injection moulded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam shall be moulded with density 45+/-2 kg/cum and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest shall be designed with the following features: Up-Down adjustment— 8 steps (8 0+0.Scm range). Height adjustable armrest structure which shall be powder coated & fitted with an armrest top. Fixed Armrest Top shall be PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side. Lumbar pad shall be an adjustment of 8.0 + 0.5 cm in height. |
| 12 | CUSTOMISED WORKSTATION Providing, fabrication and installation of computer table of size approximately 1200/1000 x 600 x 750 mm, made out of 18mm thick MDF Board and edges finish with 0.5 mm thick solid edge banding, exposed edges finished with 02 mm thick PVC edge banding including keyboard tray, handle, 02 nos wire manager, Foot rest etc including transportation, loading and unloading. |
| 13 | PEDESTALProviding and fixing of 2 box + 1file: minimum Size-390wx435dx645H Construction & Material of Drawer Unit: Welded Assembled of 0.8 mm thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2 mm thick CRCA Top Stiffener & Bottom stiffener. Drawer Fronts & Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking: 10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism (Godrej)/ Hafele/ Hettich make lock. Castors: Swiveling nonlockable Castors mounted below the body shell. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).\\" |
| 14 | CPU trolleySupply & Installation of Metallic CPU Trolley of Dimensions - Adjustable Width (150 - 225 mm) Weight - 1.5 Kg Material - CRCA Steel Finish: Powder Coating Thickness-0.8 mm Please Enable Macros to View BoQ information |
