|
| 1 | Jungle clearance |
| 2 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines,grades and cross sections,including all lifts and combined lead upto 30m. |
| 3 | Dressing bed and preparation of sub grade for lining. |
| 4 | 1.8 meter high G.I. barbed wire fencing with 2.4 meter angle iron posts 50x50x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 12 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications |
| 5 | Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing :-allowances, lead and dressing : depth 0 upto 1.5 meter |
| 6 | Brick lining 75 mm thick in 1:3 cement, sand morta rover LDPE over dressed sub-grade with 15mm thick sand cushion in bed for trapezoidal On side slopes. |
| 7 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m. Depth for All classes of soil except rocky |
| 8 | Providing,Laying, fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications160mm o/d PVC pipe of 2.5Kgf./ sqcm |
| 9 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1 as per ISI 150mm i/d Sluice Valves flanged |
| 10 | LED Based SPV Street Lightening System 12 watt, 75 watt SPV module 12.8v- 30 ah, lithium ferro phosphate battery (>2000 cycle) 6 mtr hot dipped GI pole 76.1 mm od, 3.6 mm thick & 38 kg weight (+10) 70 Micron Zinc coated |
| 11 | Supply and fixing of MECHANICAL TYPE Flow meter 150mm dia with fitting assembly complete in all respect as per design and PWD Specification and instruction of engineer in charge. |
| 12 | Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.Size 0.9 m. x 0.9 m. |
| 13 | Supplying and Fixing PVC Repair/service saddle for repair of PVC pipe line excluding the cost of excavation complete in all respects.160 mm i/d |
| 14 | Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. 50mm internal diameter |
| 15 | Place Identification sign board 900x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67 2012 |
| 16 | Any Other Item (CSR + SP) Please Enable Macros to View BoQ information |
