|
| 1 | Earth work Excavation in ordinary soil in F&P within intial lead and lift including rough dressing and levelling the ground etc. complete. |
| 2 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead |
| 3 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m |
| 4 | Supplying and filling F&P with river sand with well watering and ramming etc. complete. |
| 5 | Supplying all materials, labour, T&P and providing Cement Concrete (1:3:6) using 4 cm size CBHG metal etc. complete. |
| 6 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in F&P etc. complete. |
| 7 | Supplying all materials, labour, T&P and providing RCC M(25)using 12mm size CBHG chips etc. complete. |
| 8 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) inSuperstructure etc. complete. |
| 9 | Providing 12 mm thick CP(1:6) to out side smooth surface etc. complete. |
| 10 | Providing 16 mm thick CP(1:6) to in side smmoth surface etc. complete. |
| 11 | Providing 6 mm thick CP(1:4) to smooth surface etc. complete. |
| 12 | one coat cement wash to inside and out side smooth surface with all cost of labour, T&P , materials etc. complete. |
| 13 | Supplying all materials, labour, T&P for applying two coats of weather coat seal coat with primer over the out side and inside wall with well, watering and curing etc. complete. |
| 14 | G.I. Grill gate,Door , shutter made out of G.I.flat angle, square bar painted with red oxide primer as per the design approved . |
| 15 | Supplying all materials, labour, T&P and providing Reinforced Cement Concrete (1:1.5:3) using 12mm size BHGCB chips including centering and shuttering etc. complete. |
| 16 | Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges, etc., complete. |
| 17 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.Col base/ GB |
| 18 | Lintel |
| 19 | Col/Beam |
| 20 | Supplying ,fitting & fixing of Orissa pan ,100mm.dia. H.C.I.,P-trap & jointing materials etc all complete as per the direction of Engineer-in-charge. |
| 21 | Supplying all materials, labour, T&P and cutting grooves in pucca floor or Brick wall and mending good the damages for taking G.I. pipes complete as per P.H. specification. |
| 22 | Supplying all materials, labour, T&P and cutting holes in brick or stone masonry wall for taking G.I. pipes, HCI pipes, and mending good the damages 375mm thick wall. |
| 23 | Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. 20mm dia UPVC pipe |
| 24 | 25mm dia UPVC pipe |
| 25 | 32mm dia UPVC |
| 26 | Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma)15mm dia C.P. concealed stop cock (plazza / Zigma / Mousami) |
| 27 | C.P. soap disc. |
| 28 | 15mm dia C.P. short body Bib cock (plazza / Zigma / Mousami) |
| 29 | 15mm dia C.P. long body Bib cock (plazza / Zigma / Mousami) |
| 30 | C.P. Towel ring |
| 31 | C.P. Towel rail 450mm x 25mm |
| 32 | Bevelled edge mirror(600mmx450mm) |
| 33 | 12.50ltrs/10ltrs. Capacity L.L.flushing cistern with complete fittings |
| 34 | Flat back standing Urinal (Medium) |
| 35 | SKY LIGHT |
| 36 | Supplying all material T&P for fitting and fixing of PVC water tank of 1000 lits with all lead , lift, taxes, and royalties etc complete. |
| 37 | Supplying all materials labour & T&P for constructing of brick masonry inspection chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of 80mm thick R.C.C. pre cast slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (750mm x 750mm x 450mm deep) |
| 38 | Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. 110mm dia PVC SWR pipe S/S |
| 39 | 110mm dia PVC single junction |
| 40 | 110 mm Plain Bend 45 degree |
| 41 | 110mm dia P.V.C. SWR Cowl |
| 42 | Labour for drilling and perfectly vertical bore hole of specified dia for specified depth below ground level through consolidated and consolidated roack with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of rig with its accessories T&P and consumables etc to lowering of 125mm x 100mm dia GI/PVC/MS Pipe for housing fitted with socket with or without well screen and as per the necessary for soft medium, hard and boulders formation (GI/PVC/MS casing pipes if required to prevent collapse of over burden is to loweing and with drawing after compeltion of the tube well) |
| 43 | Lowering the following size of PVC ASTM Sch-80 housing pipe with or without slotted from ground level upto 45.00 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes T&P etc all complete and keeping the top of casing pipe threaded including plugging tubewell to prevent entry of foreign materials.Lowering of 125mm dia PVC pipe=50.0m |
| 44 | Supply of 125mm dia PVC ASTM Sch--80 pipe includign all cost complete |
| 45 | Cleaning and developing the tube well with their own compressor continuous wored till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per direction of Engineer-in-charge. |
| 46 | Supply of 1.0 HP, 7ST 4\\" dia ISI mark single phase submersible pumpset with pannel box etc. complete. (To be paid as per actual)1.0HP submersible pump 1 set |
| 47 | Cost of 32mm HDPE Pipe |
| 48 | Cost stainless steel nipple |
| 49 | Cost of 1.5sqmm electric Cable |
| 50 | Cost of Bore Cover |
| 51 | Cost of clamp |
| 52 | Cost of steel rope . |
| 53 | Cost of installation of pump including accessories etc. complete. |
| 54 | Fixing Vertified tiles in floors, treads or steps and landing over 20mm bed of C:M (1:4) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete |
| 55 | Fixingvetrified tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete |
| 56 | Supplying fitting and fixing of PVC framed with shutter for Doors etc. complete. |
| 57 | Supplying all materials, labour, T&P for applying two coats of plastic paint inside wall etc. complete. |
| 58 | Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.) |
| 59 | Supply of Aluminium coloured Ridge for fixing at middle of roofing etc complete. |
| 60 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks 80mm thick ness of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required |
| 61 | Supplying fitting and fixing of PVC framed with shutter for Doors etc. complete. |
| 62 | Supplying fitting fixing of Turbine roof top ventilater |
| 63 | Supplying ,Fitting ,fixing of stainless steel gate of 316 grade including buffling ,polishing etc |
| 64 | Painting Two coats of weather coat over one coat of primer including painting charges of painter for decorative painting as per direction of Department |
| 65 | Enamel painting two coats over one coat of primer |
| 66 | supplying , fitting , fixing of WPC door with frame including cost of all materials etc complete Please Enable Macros to View BoQ information |
