|
| 1 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 2 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). (DSR 13.111.2) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 4 | One or more coats on old work (DSR 13.99.1) |
| 5 | 12 mm cement plaster of mix : |
| 6 | 1:4 (1 cement: 4 coarse sand) (DSR 13.4.1) |
| 7 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) |
| 8 | Providing and applying cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge. (NS) |
| 9 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
| 10 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR 9.21.1) |
| 11 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. up to the height of 15m with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness. (NS) |
| 12 | Dashing Cement Concrete 1:11/2 :3 in R.C.C. beams, Stairs, Facias etc. of average thickness 1\\" excluding steel reinforcement, centering and shuttering but including curing of the concrete complete in all respect and to entire statisfaction of the Engineer-in-charge. (NS) |
| 13 | Removing rust from exposed reinforcement bars upto 15m height in RCC walls, columns, beams, shelves etc to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles afer 24hrs of its application with wire brush and thouroughly washing witgh water and allowing it to dry all complete as per directions of engineer in charge. (NS) |
| 14 | Providing and Fixing chicken mesh of size ½\\"x½\\" and 26 gauge up to 15m height on RCC beams, facias, brick work etc. wherever required with wooden gutties, nails and screws including drilling holes etc complete as per directions of the Engineer-in-charge. (NS) Please Enable Macros to View BoQ information |
