|
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : DAY TO DAY MAINTENANCE OF PLUMBING, SANITARY ITEMS, BATH FITTINGS, FALSE CEILING, TILING WORKS, JOINERY WORKS AND OTHER B/R WORKS AT ZONE 9 OTM & OP WKS AT NAA UNDER GE (N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (8237) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed. |
| 3 | Taking down chowkats and shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4Sqm each complete in all respect as specified and directed. |
| 4 | Dismantling asbestos cement sheet, ridge (corrugated, semicorrugated, plain etc.) in roof covering,wall etc or of similar types complete all as specified and directed. |
| 5 | S&F coloured 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws with bitumen washer to truss members of any material, including taking down existing sheet complete all as specified and directed. |
| 6 | S&F coloured 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strenght of 550 Mpa as in ridge, valley gutter or of similar type, fixed with self tapping screws with bitumen washer to truss members of any material, including taking down existing sheet complete all as specified and directed. (The measurement shall be carried out as in a plain sheet). |
| 7 | S&F coloured 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet having tensile strenght of 550 Mpa as in eves covering or of similar type, fixed with self tapping screws with bitumen washer over mild steel flats, angles etc. and screws for fixing with framed structure including taking down existing sheet complete all as specified and directed.. (Note:- MS work shall be measured and paid separately). |
| 8 | S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type including dismantling of existing false ceiling boards, complete in all respect as specified and directed. |
| 9 | S&F in repairs in for mild steel sections (Beam, tee, angle, channel or flat sections) in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, independent fixing with welding etc. including distance pieces, cleats etc. using Fe 410-W (Gde E-250) quality A complete in all respect as specifified and directed. |
| 10 | S&F plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads using second class wrought HW sec area exc 13 Sqcm but not exc 25 Sqcm including taking down of framed work complete in all respect as specifified and directed. |
| 11 | M&L for rendering/plastering 10mm thick in cement mortar 1:3 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra with water proofing compound over chajja, coping including taking down existing surface complete all as specified and directed.. (Water proofing compound shall be measured and paid under supply item only) |
| 12 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torched application including taking down existing surface complete all as specified and directed. |
| 13 | M&L for preparation of APP roof treatment surface of any description and apply two coats of aluminium paint over it including taking down existing surface complete all as specified and directed. |
| 14 | M&L in repair for second class HW scantalling, wrought, in any position for framed work , jointing with necessary nails, nut bolts etc including necessary supports for truss structure complete all as specified and directed. |
| 15 | Supply and fixed in repair for 150mm size, aluminium handle cast type anodised complete in all respect as specifified and directed. |
| 16 | Supply and fixed in repair for 200mm length of bolt, aluminium anodised, barrel tower bolt of extruded section and fixed complete in all respect as specifified and directed. |
| 17 | Supply and fixed in repair for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring heavy duty fixed to shutter complete in all respect as specifified and directed. |
| 18 | Supply and fixed in repair 12mm dia bolt 250mm long, aluminium anodised sliding door bolt with hasp and staple (bolt type) complete in all respect as specifified and directed. |
| 19 | Supply and fixed in repair 125 mm size, aluminium handle cast type anodised complete in all respect as specifified and directed. |
| 20 | Supply and fixed in repair 200mm length of bolt, aluminium anodised, barrel tower bolt of extruded section and fixed complete in all respect as specifified and directed. |
| 21 | Supply and fixed in repair 300 mm long, mild steel ordinary rat tail rod pattern springs, including roller and roller plate including necessary welding if required, complete in all respect as specified and directed. |
| 22 | Supply and fixed 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete in all respect as specified and directed. |
| 23 | Supply and fixed to frames/chowkhats, second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete in all respect as specified and directed. |
| 24 | Supply and fixed in repair plain sheet glass 4 mm thick, ordinary quality and glazing with oil putty or in wooden/steel sections including necessary new second class hard wood wooden beadings of existing shape and size including painting or welding/ new nut and bolt required not exc. 0.5 sqm in each pane etc. including hacking out old glasses complete in all respect as specified and directed. |
| 25 | Supply and fixed in repair figured glass 4mm thick, pin head type and glazing with oil putty or in wooden/steel sections including necessary new second class hard wood wooden beadings of existing shape and size including painting or welding/ new nut and bolt required not exc. 0.5 sqm in each pane etc. including hacking out old glasses complete in all respect as specified and directed. |
| 26 | Supply and fixed in repair for GI wire cloth 0.43mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized staples in wooden/steel sections complete in all respect as specified and directed. |
| 27 | Supply and fixed Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete in all respect as specified and directed. |
| 28 | Supply and fixed Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening at site as per specification & drawing complete in all respect as specified and directed. |
| 29 | Supply and fixed in repair for 100mm size of butt hinges mild steel complete in all respect as specified and directed. |
| 30 | Supply and fixed in repair for 75mm size of butt hinges stainless steel complete in all respect as specified and directed. |
| 31 | Supply and fixed in repair 20mm dia coloured designer PVC coated over mild steel tubing including end brackets, stops, rollers etc. used for curtain rod complete in all respect as specified and directed. |
| 32 | S&F in repair for anodized aluminium sliding windows shutters without sash bars, aluminium sections weighing (side and top section not less than @ 0.634Kg/m, bottom @ 0.606 Kg/m, locking section @ 0.734 Kg/m) including necessary jointing cleats, galzing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings like locking arrangments and suitable handles for sliding purpose, 4mm thick plain glass and stainless steel wire mesh of dia 0.32mm and average width of aperature 1.80mm, wheels etc. including cost of anodized aluminium frame/chowkhat complete in all respect as specified and directed. |
| 33 | M&Lin repair for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete in all respect as specified and directed. |
| 34 | S&F in repair for Anodised aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed. |
| 35 | M&L in repair for anodised aluminium grill for doors, windows, ventilators including joining cleat for fixing etc. complete in all respect as specified and directed. |
| 36 | S&F in repair for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete in all respect as specified and directed. |
| 37 | S&F in repair for powder coated (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type/sliding without sash bars, aluminium sections weighing over 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. |
| 38 | M&L in repair for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete in all respect as specified and directed. |
| 39 | S&F in repair for powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed. |
| 40 | S&F in repair for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category withproperty of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 41 | S&F in repair for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 42 | M&L in repair for Solid PVC Wall Lining consisting of 5mm thick but single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 43 | M&L in repair for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 44 | M&L for PCC (1:2:4) Type B-2 (40mm graded aggregate) as foundation filling and mass concrete for post including dismantling of existing surface complete all as specified and directed. |
| 45 | S&F for 55-60mm thick coloured, glazed pre coated interlocking or without interlocking paver block of any shape and size confirming to IS 15658/1237 with upto date amendments, M-35 Grade with grey cement with pigment laid over fine river bed sand complete in all respect as specified and directed.(Note:- River bed sand shall be measured and paid separately). Sample as approved by GE. |
| 46 | M&L for river bed fine sand filling under floor or below paver blocks incl. watering and consolidation complete in all respect as specified and directed. |
| 47 | M&L for 18-20mm thick machine cut kota stone slab flooring of size not less than 500X500mm over 20mm thick cement mortar (1:6) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing surface complete all as specified and directed. |
| 48 | M&L for 18-20mm thick machine cut kota stone slab of size not less than 500X500mm in riser of steps, skirting , dado and pillar over 15mm thick cement mortar (1:4) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 49 | M&L for granite work (of any type) 18-20mm thick machine cut, over 15mm thick cement mortar (1:4)screed base laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 50 | M&L for 18-20mm thick granite work (of any type) machine cut, in skirting/dado laid over 15mm thick cement screed (1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grindingand polishing complete all as specified and as directed. |
| 51 | M&L for rounding to edges of granite slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and as directed. |
| 52 | Providing and laying 75mm thick cement concrete type C-2, 1:3:6 (using 40mm nominal size crushed and graded stone aggregate) and finished even and fair in base concrete including dismantling of existing surface complete all as specified and directed. |
| 53 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate as in flooring including dismantling of existing surface complete all as specified and directed. |
| 54 | Providing and laying light coloured vitrified ceramic tiles 8 to 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, including dismantling of existing surface complete all as specified and directed. |
| 55 | Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, including dismantling of existing surface complete all as specified and directed. |
| 56 | Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.15 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick rendering in cement mortar (CM) 1:4, including dismantling of existing surface complete all as specified and directed. |
| 57 | M&L for Cement concrete chequered tiles with grey cement and pigment 30cm x 30cm x 20-25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors over 15mm screed bed in CM 1:6 including dismantling of existing surface complete all as specified and directed. |
| 58 | Attending day to day complaints for petty repairs to leakage of bib taps, pillar cock, stop cock, waste pipes, float valves, angle valve, concealed valve, GI union, joints of GI pipe, re-fixing of bottle trap, wash hand basin, wall mixer, WHB mixer etc, by changing the PVC washers/,Sheet washers, cistern leaking/adjustments or any other minor accessories etc complete in all respect as specified and directed. NOTE:-Minimun two plumbers alongwith with two helpers with necessary tool and plant shall be provided by contractor per day to attend the complaint, and the complaint for the attended qtr is valid for one month, if complaint re-registred the same will be carried out without any extra cost to the deapartment , the printed complaint book duly serially numbered for this will be provided by the contractor, if complaints are registered more, the men power will be increased by the contractor, the rates for these are deemed to include in the quoted rates.Failure to complete the job within 24 hrs, penality of Rs 200 per day per complaint will be recovered from the contractor till the date of completion) |
| 59 | Attending day to day complaints for petty repairs to door, window, cup board, such as adjusting to tower bolt, handle, sliding door bolt, easy to door/window/ventilators complete in all respect as specified and directed. NOTE:-Minimun two carpenters alongwith with two helpers with necessary tool and plant shall be provided by contractor per day to attend the complaint, and the complaint for the attended qtr is valid for two months, if complaint re-registred the same will be carried out without any extra cost to the deapartment , the printed complaint book duly serial numbered for this will be provided by the contractor, if complaints are registered more, the more tradesmen will be increased by the contractor, the rates for these are deemed to include in the quoted rates. Failure to complete the job within 24 hrs, penality of Rs 200 per day per complaint will be recovered from the contractor till the date of completion) |
| 60 | M&L for seven stage cleaning and sterilization of inside and outside of overhead PVC service tank of exc 250 but n. exc 500 liters capacity through bacteriological treatmentby using TERBAC GS, TERBAC-G-65 and ultra violet ray. First stage: Drain out the water by using exist valve or high capacity dewatering system without disturbing the other material/item. Second stage: Claen th all algae formation inside the tank by using TERBAC G 10, a laboratory tested branded chemical of the company and scrubbing the walls of the tank. Third stage : Clean the tank with fresh water by high speed jet pump.. Fourth Stage: Bacteria screening by decertification using TERBAC-G5, a Govt laboratotory certified branded halogen compound. Fifth stage: Cleaning the floor of water tank by industrial vaccum cleaner. Sixth stage: Second bacteria screening and sterilizing method by using ultra violet ray within the tank and kills all suspended bacteria. Seventh stage: Cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65. Note: Cost of staging and necessary working platform shall deemed to be included in quoted rate. Contracor shall ensure necessary safety precaution and insurance of workers during execution. The quoted rates shall deemed to be included the cost of writing date of cleaning, due date and capacity of tank shall be mentioned over tank. |
| 61 | M&L for seven stage cleaning and sterilization of inside and outside of overhead PVC service tank of exc 500 but n. exc 1000 liters capacity through bacteriological treatmentby using TERBAC GS, TERBAC-G-65 and ultra violet ray. First stage: Drain out the water by using exist valve or high capacity dewatering system without disturbing the other material/item. Second stage: Claen th all algae formation inside the tank by using TERBAC G 10, a laboratory tested branded chemical of the company and scrubbing the walls of the tank. Third stage : Clean the tank with fresh water by high speed jet pump.. Fourth Stage: Bacteria screening by decertification using TERBAC-G5, a Govt laboratotory certified branded halogen compound. Fifth stage: Cleaning the floor of water tank by industrial vaccum cleaner. Sixth stage: Second bacteria screening and sterilizing method by using ultra violet ray within the tank and kills all suspended bacteria. Seventh stage: Cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65. Note: Cost of staging and necessary working platform shall deemed to be included in quoted rate. Contracor shall ensure necessary safety precaution and insurance of workers during execution. The quoted rates shall deemed to be included the cost of writing date of cleaning, due date and capacity of tank shall be mentioned over tank. |
| 62 | M&L in repairs in for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete in all respect as specifified and directed. |
| 63 | M&L 15mm thick plastering on wall in cement mortar (1:4) finished even and smooth without using extra cement on one side of lathing or stone masonary surface other than fair face including taking down existing surface complete all as specified and directed. |
| 64 | M&L 15mm thick plastering on wall in cement mortar (1:6) finished even and smooth without using extra cement on other side of lathing or stone masonary surface other than fair face on other side of lathing including taking down existing surface complete all as specified and directed. |
| 65 | Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 part of bitument and 3 part of sand) complete in all respect as specifified and directed. |
| 66 | M&L for rendering/plastering 15 mm thick in cement mortar 1:4 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra cement including taking down existing surface complete all as specified and directed. |
| 67 | M&L for rendering/plastering 15 mm thick in cement mortar 1:6 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra cement including taking down existing surface complete all as specified and directed. |
| 68 | M&L for brick work with sub-class \\"B\\" old size bricks of class designation (CD) 75, straight or curved on plan exc 6m mean radius, built in cement mortar (CM) 1:6, including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 69 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) including dismantalling of brick work built in cement mortar in any position, including dismantling of existing surface complete all as specified and directed. |
| 70 | Material & labour for preparation of new un-decorated plastered surface of wall and applying two coats of white wash including necessary filling with wall care putty complete in all respect as specifified and directed. |
| 71 | Material & labour for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper including one coat finished with spunge roller over a coat of alkali resistant priming paint over 2mm thick (in two layers), wall care putty complete in all respect as specifified and directed. |
| 72 | Material & labour for preparation of new plastered surface of ceiling and applying three coat of white wash complete in all respect as specifified and directed. |
| 73 | Material & labour for preparation of old decorated plastered surface of ceiling and applying one coat of white wash including necessary filling with wall care putty complete in all respect as specifified and directed. |
| 74 | Material & labour for preparation of old decorated plastered surface of wall and applying two coats of white wash including necessary filling with wall care putty complete in all respect as specifified and directed. |
| 75 | Material & labour for complete removal of old decorated plastered surface of wall and applying two coats of oil bound distemper and one coat finished with spunge roller over a coat of alkali resistant priming paint over 2mm thick wall care putty complete in all respect as specifified and directed. |
| 76 | M&L for preparation of old decorated surfaces including washing, rubbing down and stopping of white wash surfaces of walls (Plastered or un-plastered) including cormices pilasters etc and using wall care putty to fill the voids and applying two coats of oil bound distemper and finished another one coat with spunge roller including one coat of alkali resistant priming paint before distempering complete all as specified and directed. |
| 77 | Material and labour for preparation of old wooden surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint including filling of knotting and stopping etc. with filling material complete in all respect as specified and directed. |
| 78 | Material and labour for preparation of old decorated steel surface of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint including filling of knotting and stopping etc. with filling material complete in all respect as specified and directed. |
| 79 | Material and labour for complete removal of existing treatment of plastered surface of walls and applying two coats of weather coat including filling with 2mm thick wall care putty over a coat of primer including rubbing and all necessary preperation complete in all respect as specified and directed. |
| 80 | M&L for preparation of old decorated surfaces of wall after complete scrapping down and using wall care putty to fill the voids and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 81 | S&F in three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia hoisted and fixed in position including dismantling/ taking down all as specified in SSR part I, complete in all respect as specified and directed. |
| 82 | S&F three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia hoisted and fixed in position including dismantling/ taking down all as specified in SSR part I, complete in all respect as specified and directed. |
| 83 | Supply and fixed in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete in all respect as specified and directed. |
| 84 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size not less than 600mm length and width not lessthan 500mm and depth not less than 200mm all as specified and as directed. |
| 85 | Taking up or down 20mm dia bore pipe steel tubing and connections and supply and fix Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting , chasing , in concealed conduiting complete in all respect as specified and directed. |
| 86 | Taking up or down 15mm dia bore pipe steel tubing and connections and supply and fix Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting , chauging , in concealed conduiting complete in all respect as specified and directed. |
| 87 | Supply and fixed in repair PTMT ball valve high pressure 20mm bore dia with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe/fittings complete in all respect as specified and directed. |
| 88 | Supply & fixed in repair 15 mm dia bore, Pillar taps of CP fancy type high pressure screwed for iron pipe complete all as specified and directed. |
| 89 | Supply & fixed in repair 15mm bore dia stop valve of PTMT any colour high pressure screwed for iron pipe & fixed (min wt 15mm - 90gms) complete all as specified and directed. |
| 90 | S&F 15mm bore GI tubes medium grade, galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting chauging in concealed nature and taking down of existing pipe line complete in all respect as specified and directed |
| 91 | S&F 20mm bore GI tubes medium grade, galvanished with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting chauging in concealed nature and taking down of existing pipe line complete in all respect as specified and directed |
| 92 | S&F in repairs in for PVC (SWR) nahani trap of 75mm outlet dia fixed with PVC 150X150mm size openable at center grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 93 | Supply & fixed in repair 15mm dia PVC Connection with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 94 | Supply & fixed in repair 15mm dia PVC Connection with PTMT nuts of length 600 mm long complete all as specified and directed. |
| 95 | Supply & fixed in repair 15mm bore Angle valves CP fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 96 | S&F in repair 20mm dia bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete in all respect as specified and directed. |
| 97 | S&F in repair PVC cover for 500liter capacity water storage tanks of any description and any shape including PVC locking arragement complete in all respect as specified and directed. |
| 98 | S&F in repair PVC cover for 1000liter capacity water storage tanks of any description and any shape including PVC locking arragement complete in all respect as specified and directed. |
| 99 | Supply and fixed in repairs short body bib taps with wall flange of 15mm bore, fancy type CP finish cast copper alloy with crutch handle screwed down for iron pipes complete in all respect as specified and directed. (Note:- if small piece of pipe required for connection with fitting beyond socket/elbow etc. CP finish copper alloy extension nipple will be used without any extra cost) |
| 100 | Supply and fixed in repairs long body bib taps with wall flange of 15mm bore, fancy type CP finish cast copper alloy with crutch handle screwed down for iron pipes complete in all respect as specified and directed. (Note:- if small piece of pipe required for connection with fitting beyond socket/elbow etc. CP finish copper alloy extension nipple will be used without any extra cost) |
| 101 | Supply and fixed in repairs Health Faucet cast copper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00m complete in all respect as specified and directed. |
| 102 | Supply and fixed in repairs CP finish cast copper alloy, two way bib cock complete in all respect as specified and directed. |
| 103 | Supply and fixed in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity low level, white, including inlet ball valve, float valve and handle including bracketS&Flush pipe of polyethylene of high density complete in all respect as specified and directed. |
| 104 | S&F in repair wash hand basins, vitreous China of size 550 x400mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed. |
| 105 | Supply and fixed in repair cast copper alloy CP finished, central hole basin mixer with extended casted spout with 450mm long braided hoses complete in all respect as specifified and directed. |
| 106 | Supply and fixed in repair, 32 mm dia bore of pipe waste fittings, brass, chromimum plated for glazed ware sinks, wash hand basin, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement including 32 mm bore dia PVC waste pipe complete in all respect as specified and directed. |
| 107 | Supply and fixed in repair 32mm dia bore PVC waste flexible pipe suitable for kitchen sink, wash hand basin complete in all respect as specified and directed. |
| 108 | Supply and fixed in repairs in for PVC (SWR) grating for floor/nahani trap of size 150mmX150mm (with or without waste hole) including jointing with cement and necessary cutting for size complete in all respect as specified and directed. |
| 109 | Supply and fixed in repair 4mm thick, 600 mm x 450 mm bevelled edge mirror of selected quality decorative type mounted on 6 mm commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete in all respect as specified and directed. |
| 110 | Supply and fixed in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with brass chromium plated bracket guard and railing 60 cm long complete in all respect as specified and directed. |
| 111 | Supply and fixed in repairs in for PVC soap dish complete in all respect as specified and directed. |
| 112 | Supply and fixed in repair cast copper alloy, CP finish tubular towel rail, D type,60 cm long between flanges complete in all respect as specified and directed. |
| 113 | Supply and fixed in repairs in for towel ring of copper alloy CP finished complete in all respect as specified and directed. |
| 114 | Supply and fixed PVC (SWR) pipes single socketed in any length with rubber ring joints laying in trenches 110mm bore including dismantling and breaking up drain pipes complete in all respect as specified and directed. |
| 115 | Supply and fixed PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including mild steel pipe clamps and dismantling and breaking up drain pipes complete in all respect as specified and directed. |
| 116 | Supply and fixed PVC (SWR) pipes single socketed in any length with rubber ring joints laying in trenches 75mm bore including dismantling and breaking up drain pipes complete in all respect as specified and directed. |
| 117 | Supply and fixed PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including mild steel pipe clamps and dismantling and breaking up drain pipes complete in all respect as specified and directed. |
| 118 | Supply and fixed in repairs in for PVC (SWR) bends of any radius 110mm bore complete in all respect as specified and directed. |
| 119 | Supply and fixed in repairs in for PVC (SWR) bends any radius 75mm bore complete in all respect as specified and directed. |
| 120 | Supply and fixed in repairs in for PVC (SWR) junction angle (single Tee) equal or unequal 110mm bore pipe with access door complete in all respect as specified and directed. |
| 121 | Supply and fixed in repairs in for PVC (SWR) junction angle (single Tee) equal or unequal 75mm bore pipe with access door complete in all respect as specified and directed. |
| 122 | Supply and fixed in repair 15mm bore, cast ABS body, CP finish, shower rose of size 100 mm dia and shower arm of cast copper alloy CP finished, fixed to iron pipe/fiitings complete in all respect as specified and directed. |
| 123 | Supply and fixed in repairs 15 mm bore male/female threaded fancy type CP finished angle valves, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions including CP finish cup washer/wall flange complete in all respect as specified and directed. (Note:- if small piece of pipe required for connection with fittings beyond socket/elbow etc. CP finish copper alloy nipple will be used without any extra cost) |
| 124 | Supply and fixed in repair toilet paper holder of cast copper alloy chromium plated fixed to walls with chromium plated (CP) brass screws complete in all respect as specified and directed. |
| 125 | Supply and fixed in repair PVC seat cover for EWC of any make and size, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete in all respect as specified and directed. |
| 126 | Taking down existing damaged EWC alongwith complete PCC and cement concrete from sunken floor and providing new EWC and seat cover and water proofing treatment to sunken floor as per following stages:- (a) 15 mm thick plastering in CM (1:3) with WPC at all around wall and base of sunken floor with proper slope. (b) Applying a coat of 85/25 gde hot bitumen @ 1.2Kg/ Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 50 micron, natural colour with cold cut back adhessive. (c) Fixing of 25mm dia GI pipe (medium grade) spout of length 45 cm. (d) Supply & fixing of vitreous china wash down water closet pan (pedestal pattern), white, seat cover and P or S type bend etc complete including providing cement concrete and cement filling (1:5:10) and 25 mm thick PCC 1:2:4 at top surface.. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
