|
| 1 | Jungle Clearance |
| 2 | Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads Disposal/carraige from 0 to 450 m |
| 3 | Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing :- 0 to 1.5 m depth |
| 4 | (Brick lining 75 mm thick in 1:3 cement, sand mortar over LDPE over dressed sub-grade with 15 mm thick sand cushion in bed for trapezoidal section only including, laying trenching and jointing of LDPE. On side slopes |
| 5 | 1.8 meter high G.I.barbed wire fencing with 2.4meter angle iron posts 50x50x6mm placed every 3meters centre to centre 0.6meter below ground level,every 15th post, end post,corner post suitably struttedand provided with 12horizontal lines and twodiagonals interwoven with horizontal wires fixed with GIstaples, turn buckles etc.including foundation concrete1:2:4 of size0.30x0.30x0.75m for eachpost complete as per technicalclause 808 of MORT&H specifications |
| 6 | Place Identification sign board 900x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .Using high intensity Microprismatic grade retro reflective Sheeting Type XIas per ASTM D 4956 09 andas per IRC 67 2012 |
| 7 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling ofbeds of trenches to correctgrade, cutting joint holes,refillingconsolidation,watering ,including the cost ofdewatering of rain water,diversion for traffic, nightsignals. providing & fixingcaution boards, crossing over trenches for access to thehouses, watching, fencing,etc. and removal of surplussoil out side/inside the towninvolving lead upto 15 metercomplete in all respect.((a)) Earth work upto 1.5 m.Depth for(i) All classes of soil except rocky |
| 8 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 160mm o/d PVC pipe |
| 9 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (A) Class PN-1 as per ISI (c) 150mm i/d Sluice Valves |
| 10 | Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (b) Size 0.9 m. x 0.9 m |
| 11 | Supplying and Fixing PVC Repair/service saddle forrepair of PVC pipe lineexcluding the cost ofexcavation complete in allrespects.(c) 160 mm i/d |
| 12 | Providing, laying, fixing, testing and commissioning of C Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. 50mm internal diameter |
| 13 | Supply and fixing of mechanical type Flow meter 150mm dia with fitting assembly complete in all respect as per design and PWD Specification and instruction of engineer in charge. |
| 14 | LED Based SPV Street Lightening System 12 watt, 75 watt SPV module 12.8v- 30 ah, lithium ferro phosphate battery (>2000 cycle) 6 mtr hot dipped GI pole 76.1 mm od, 3.6 mm thick & 38 kg weight (+10) 70 Micron Zinc coated |
| 15 | Dressing of earth work. New work or remodeling work. Unit |
| 16 | Any Other Item (CSR + SP) Please Enable Macros to View BoQ information |
