|
| 1 | Dismanteling of Pole/Street Light standard/ strut embedded in cement concrete foundation etc. as required. |
| 2 | Dismanteling of Overhead lines comprising of copper/aluminium head conductor,G.I. wire,cross arm,insulators,etc. as required. |
| 3 | Carraige of STP-23/33 pole from road site ( STORE ) To erection site |
| 4 | Erection of mateallic pole ( above 8.0 mtr to 10 mtr length in cement concrete 1:3:6( 1 cement:3 coarse sand: 6 graded stone 10 mm nominal size ) foundation including excavation, refilling etc. As required. |
| 5 | Providing and making steel pole collar with cement concrete (1 cement: 3 coarse sand: 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted) |
| 6 | Painting of electric pole with 2 coats of aluminium paint over red oxide primer complete in all respects . |
| 7 | Supply and erection of stay set complete ( galvanised) with 19/20mm diax1.8 mtr long stay rod ,anchor plate of size 45cmx45cmx7.5mm thimble stay clamps turn buckle ( 20mmx60mm)7/4.00mm dia GI stay wire and strain insulator etc in cement cconcrete 1:3:6( 1 cement:3 coarse sand: 6 graded stone agreegate 40mm nominal size) fondation including excavation and refilling etc. as required |
| 8 | Supplying and fixing of G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 9 | Supply & erection of junction box having one no.06 Amp MCB & one no. neutral link with door & locking arrangement on street lighting pole including all accessories for termination. |
| 10 | Supply of LT Aerial Bunched cable of size 3cx35+1x35+1x16 Sqmm ( phase conductor cable +bare messenger wire + Phase street light ) of XLPE aluminium standrad circular compacted messanger wire . |
| 11 | Stringing of LT Aerial bunched cable of size 3cx35+1x35+1x16 Sqmm ( phase conductor cable +bare messenger wire + Phase street light ) of XLPE aluminium standard circular compacted messanger wire . |
| 12 | Supply & Erection of flat Eye hook with clamp and suspension,dead end clamp suitable for 35 sqmm to 50 sqmm cable |
| 13 | supply & fixing of 30 watt LED street light fixture (Reputated make with ISI ) and making connection of led street light in STP33 to STP23 pole with connection of 2.5 SQMM copper wire complete in all respect as per direction of Engineer-IN -Charge . |
| 14 | Earthing with GI earth plate 600mmx600mmx6mm thick including acessories and providng mansonry enclousre with cover plate having locking arrengement and watering pipe of 2.7 mtr long etc . With charkol and salt required |
| 15 | Provinding and fixing 25MMX5MM G.I strip on surface or recess for connection etc as required |
| 16 | Supply of connector for aerial bunch cable complete in all respect for 35 Sqmm |
| 17 | Erection of connector for aerial bunch cable complete in all respect for 35 Sqmm |
| 18 | supply and erection of aluminium lugs suitable for 35sqmm LT PVC CLPE Armoured cable complete in all respects as per site requirements and direction of Enginner- in- charge |
| 19 | Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting Outdoor type M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only Cat A )Incoming 400 Amp MCCB-1 NOS , OUTGOING 200 Amp MCCB - 02 NOS , 100 Amp MCCB-01 NO, 63 Amp MCCB-01 NO (Cat B.) Pannel Cubicle Type |
| 20 | EPF & ESI amount Please Enable Macros to View BoQ information |
