Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of wall tiles, removing of OPD G.I. pipes, HCI pipes, sanitary works, CP fittings i/c dispose off the dismantled material in any lead complete in all respect as per satisfaction of EIC. |
| 2 | P/F of paris false ceiling with GI suspenders using fasteners and frame work with GI members using best quality wire meh (23 guage with 12 square per inch) with 12 mm POP plaster approved quality sakarni odhar shri make cornice, beading if any including two coats of plastic emulsion after preparation of surface, priming coat to the full satisfaction of the EIC i0 main member will be of 20 guage@ 2`0` ii) secondary member will be of 24 guage 3`0` iii) cutting of holes for electric fitting as per design and drawing iv) work will be executed as per drawing and design v0 floor area of false will be measured, no extra area will be paid of offsets and dome etc) complete in all respect as per satisfaction of EIC. |
| 3 | P/F SS bearing hinges Dorset make of SB Art. No. HG 1151 (102x76x3.5x12) comp. in all respects as per satisfaction of EIC. |
| 4 | P/F Dorset make Nika Model-handle on rose of SS comp. in all respects, P/F mortice latch of SS Dorset make Art.No.ML 103 comp. in all respect as per satisfaction of EIC. |
| 5 | P/F Door closer Doorset make DC 80 Ext.complete in all respect as per satisfaction of EIC. |
| 6 | P/F door stopper Dorset make DSHT-door mounted hanging type complete in all respect as per satisfaction of EIC. |
| 7 | P/F door back rubber complete in all respect as per satisfaction of EIC. As per door set |
| 8 | P/F Jet spray set for regular constellation cascade multi jet Art. No-7016 size 15x900mm of Viking complete in all respect as per satisfaction of EIC. |
| 9 | P/F coat double hook cat.No. AKB 35761 (jaquar make KUBIX F series) complete in all respect as per satisfaction of EIC. |
| 10 | Providing and fixing Corner glass self (With bracket) (ACN-CHR-1173) Jaquar make complete in all respect as per satisfaction of EIC. |
| 11 | S/E of Fan with existing fan point complete in all respect as per satisfaction of E.I.C. (Make Havells, Crompton, Bajaj, Orient) complete in all respect as per satisfaction of EIC.Ceiling decorative fan 1400 mm |
| 12 | P/F DRP bronze ball valve screwed comp. in all respect . 15mm dia |
| 13 | P/F DRP bronze ball valve screwed comp. in all respect . 20 mm dia |
| 14 | P/F DRP bronze ball valve screwed comp. in all respect . 25 mm dia |
| 15 | P/F 15mm dia CP brass 2 way bib cock Jaquar make continental series comp Cat No-Con-041KN (NS) |
| 16 | P/F tower bolt of SS round dia-10 (TBR 8”) comp. in all respects (Dorset make) |
| 17 | P/F door stopper Dorset make DSHT-door mounted hanging type comp. in all respects. |
| 18 | P/F 1” dia GI tank Nipple Unik make complete tested O.K. complete in all respect |
| 19 | P/F 12mm thick clear toughened glass fixed in aluminium frame complete in all respects fitting on Silicon and making Tape etc. complete in respect as per satisfaction of Engineer-in-charge |
| 20 | Pdg. and fixing gate ball valve DRP or zoloto make as per NS20mm dia |
| 21 | Pdg. and fixing gate ball valve DRP or zoloto make as per NS25 mm dia |
| 22 | Pdg. and applying texture as per approved finish i.e. pattinotto/Drape/Jute/ Fillipose of Oikkos make over one coat of multidecor over one coat of acrylic primer i/c preparation of base etc. complete |
| 23 | P/F soap dish holder (Jaquar make cont .series) Cat. No-ACN1131N comp. NScent |
| 24 | P/F CP brass wall mixer 3 in 1 system provision for both hand shower and over head shower Complete with 115mm long bene pipe connecting legs and wall flange (without hand andover head shower) Jaquar make Continental Series Cat. No-CON-281KN comp. |
| 25 | P/F DRP bronze ball valve screwed comp. in all respect.50mm dia |
| 26 | P/F 1” dia Ball Cock set DRP make complete in all respect |
| 27 | Pdg. and fixing 300x450 mm wall tiles of kajaria Lyptus Marfil with Lyptus Highlighterof Kajaria Make , shine stone dark and off colouur of of Kajaria Make on Dado wall facing over over base of 12 mm CCS mortar 1:3 Complete in all respect. as per drg. approved. (basic rate of tile Rs.40/-P.Sft.) |
| 28 | P/F floor tile size 400x400mm Creama floor tiles of Kajaria over base of 20 mm cement coarse sand mortar 1:3 and jointed with white cement and matching pigment complete in all respect. |
| 29 | Pdg. and fixing Hand shower/Telephone shower (100 mm Round.shape single flow (ABS body Chrome plated withRubit cleaning system HSH-1937 and SHA 549D8 and Wall bracket Cat No-SHA555 comp. in all respect |
| 30 | P/F 35mm thick Century Green Flush door shutters |
| 31 | P/F Double arm Magnifying Mirror Jaguar Make Make 1193N as per drg. and design. |
| 32 | P/F CP overhead shower 200mm x200mm Jaquar make 35497 complete as per approved drawing. |
| 33 | Making Half Round Moulding i/c Polishing Complete (N.S.) |
| 34 | P/F 1 ¼’’ waste pipe comp. in all respect as per satsifaction of EIC. |
| 35 | `P/F 75mm dia PVC pipe polypack or equivalent 6kg/ cm2. i/c sple like socket elbono Prince makecomplete in all respects.` |
| 36 | P/F C.P. Brass Pillar Cock ( CON-021KN) of Continental Series Jaquar Make Complete in all respect |
| 37 | P/F CP brass central hole basin mixer without POP up waste system with 450mm long braided hoses Cat No-CON-167 KNB (Jaquar make Continental series) comp. NS |
| 38 | P/F MIFARE RFID card lock system Japanse lock motor ( HSN Code-8301409,8523599 and 85235100 ) as per satisfaction of EIC complete in all respect with mechanical key Silver Finish. |
| 39 | `P/F vitrified floor tiles 600’mm x600’mm double charged Kajaria, Johnson,Nitco Make or equivalent as approvedby the engineer. premium quality double charged scratch and strain free with adhesive of approved brand make such as Piditlite, Laticreto, Ferrouscrete and elendure as per IS specification 15477 – 2004 using 5 KG adhesive per SQM area of tiles and jointed with white cement slurry mixed with pigment to match the shade of tiles provided in corridor, portion beyond agreement complete in all respect as per satisfaction of the Engineer in Charge (basic rate of tile Rs.65 P.Sft.) ` |
| 40 | S/E of mini bar refrigerator 42L capacity with required labour and material complete in all respect as per satisfaction of EIC (Make: Haier, Kelvinator, Godrej). |
| 41 | S/E of Air purifier DAIKIN electro static HEPA air purifier MC 55xVM6 required labour and material complete in all respect as per satisfaction of EIC. |
| 42 | S/E of mirror light with lamp required labour and material complete in all respect as per satisfaction of EIC (Basic cost:Rs. 2500/- as approved by architect). |
| 43 | S/E of 43` QLED UHD Smart TV with required labour and material complete in all respect as per satisfaction of EIC (Make: Samsung, Blue star, Daikin). |
| 44 | S/I/T/C of 9 Fin. 2000 watt PTC room oil based heater with fan including making connection with fan including making connection with required labour and material complete in all respect as per satisfaction of EIC. (Make: Havells, Bajaj, Usha). |
| 45 | S/E of decorative Double wall braket light with lamp required labour and material complete in all respect as per satisfaction of EIC. (Basic cost: Rs. 2000/- as approved by architect). |
| 46 | S/Eof strip/rope light IP65 including driver etc. required labour and material complete in all respect as per satisfaction of EIC (Make: Havells, polycab, RR cable). |
| 47 | P/F Shower arm 20mm dia and 300mm long round shape with 900 bend for wall mounted showers with stainless steel flange (SHA-479L300s) Complete in all respect (N.S) Jaquar make |
| 48 | P/F Over head shower 120 mm Round shape Single Flow (ABS Body Chrome Plated with Grey Face Plate) with Rubit Cleaning System(OHS-CHR-1789) Complete in all respect (N.S) Jaquar make |
| 49 | P/F Towel Rack 600mm long with lower hangers, Stainless steel (AKP-CHR-35781PS)Complete in all respect (N.S). Jaquar make. |
| 50 | P/F Corner glass self with bracket (ACN-CHR-1173) Complete in all respect (N.S) Jaquar make. |
| 51 | P/F Rimless, Blind Installation Wall Hung WC in white Matt With UF Soft Close Slim seat cover, Hinges and Accessories Set,(SLS-WHM-6953 BIUFSM) Size-375x520x400 mm Complete in all respect (N.S) Jaquar make |
| 52 | P/F 2 way Bib Cock with wall flange (OPP-CHR-15041PM) Complete in all respect.(Jaquar make) |
| 53 | P/F Hand Shower (Health Faucet) with 8mm dia, 1.2 meter long flexible tube and wall hook (ALD-573) Complete in all respect.(Jaquar make) |
| 54 | P/F Toilet roll holder with stainless steel Flap (ACN-CHR- 1153S) Complete in all respect (N.S) Jaquar make |
| 55 | P/F Exposed part kit of concealed stop cock (OPP-CHR-15083KPM) and Flush cock with fitting Sleeve, Operating Level and Adjustable wall Flange with Seal(Compatible with (ALD-083, ALD- 089 or ALD-081) Complete in all respect (N.S) Jaquar make |
| 56 | P/F Table top basin Size 485x370x150mm (SLS-WHT-6901) Complete in all respect (N.S) Jaquar make |
| 57 | P/F Bottle Trap 32 mm size with 300mm and 190mm Long Wall -connection Pipes and wall flange (ALD-CHR-769L300X190) Complete in all respect (N.S) Jaquar make |
| 58 | P/F Towel ring square with Round Flange (ACN-CHR-1121N) Complete in all respect (N.S) (Jaquar make) |
| 59 | Pdg. and fixing of fancy looking mirror (modiguard or equivalent) beveled edges fixed directly on Granite with S.S studs |
| 60 | P/F C.P. brass extension piece 15 mm (heavy) i/c cutting and wastage etc. complete in all respect as per satisfaction of EIC. |
| 61 | S/E of CATA exhaust fan with existing fan point complete in all respect as per satisfaction of E.I.C. (Make Havells vento jet , Crompton, Bajaj, Orient). |
| 62 | P/F tower bolt of SS round dia-10 (TBR 4”) comp. in all respects (Dorset make) |
| 63 | P/F of Mixie Juicer Grinder of minimum 950 Watt motor with all the accessories, 2 jars, copper motor, rust resistant with warranty of 2 years . complete in all respect as per satisfaction of EIC (Make - Havells, Sujata Model- Hexo GHFJMDHK095) |
| 64 | P/F of wall mounted Instant water heater of 3L capacity, 3 kW with copper heating element, corrosion resistance durability, 5 level safety protection with 2 year product warranty and 5 year tank warranty. complete in all respect as per satisfaction of EIC (Make - Haier, Havells, Jaquar Model- EI3VC1WIP) |
| 65 | P/F of Stainless Steel plain (food grade SS-304) water cooler, having cooling capacity of 40 litres per hour and storage capacity of 80 L. voltage overload protection, silent operation and comprehensive warranty of 1 year. complete in all respect as per satisfaction of EIC (Make - Blue Star, Model- 4080B) |
| 66 | P/F Elena prime vertical (manual)251tr.(EPM-WHT-V025) Geyser `Jaquar make `complete in all respect as per satisfaction of EIC. |
| 67 | S/I/T/C of 1.5 Ton Split AC 5 Star BEE rating with Auto Start Copper, condenser rotary, Stablizer free operation, outdoor unit stand , self diagnosis, Dust Filter and 3 Meter installation kit having 1 year warranty on product, 10 year warranty on compressor and 5 year warranty on PCB with required labour and material complete in all respect as per satisfaction of EIC ( Make : Blue Star, Daikin, Loyd ). |
| 68 | Providing and laying vitrified floor tiles of size (6` × 4`) of approved make, colour, and shade, laid over a 20 mm thick cement mortar (1:4) bed (1 part cement : 4 parts coarse sand). The tiles shall be jointed with grey cement slurry @ 3.3 kg/sqm, including grouting the joints with white cement and matching pigments to achieve a uniform finish complete in all respects as per specifications and the direction of the Engineer-in-Charge. |
| 69 | Providing and laying vitrified wall tiles of size (4` × 2`) of approved make, colour, and shade, laid over a 12 mm thick cement mortar (1:4) bed (1 part cement : 4 parts coarse sand). The tiles shall be jointed with grey cement slurry @ 3.3 kg/sqm, including grouting the joints with white cement and matching pigments to achieve a uniform finish complete in all respects as per specifications and the direction of the Engineer-in-Charge. |
| 70 | P/F CP Jali chilli or jaquar make 5` complete in all respect as per satisfaction of E.I.C. |
| 71 | P/F CP brass odonil container with wall flange high life make KUBIX F Series complete in all respect as per satisfaction of E.I.C |
| 72 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction ofEngineer-in-charge. (DSR 16.70.2)16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 73 | Supply of LED pendent light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% (minimum 2 Year warranty)complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge. make havells, Phillips, Crompton.(Ref Model: Havells UNECOPENDDLP8WLED830S24BLK-G2)8 W |
| 74 | Supply of LED pendent light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% (minimum 2 Year warranty)complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge. make havells, Phillips, Crompton.(Ref Model: Havells UNECOPENDDLP8WLED830S24BLK-G2)20 W |
| 75 | Supply of LED Surface COB Downlighter surface light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% ((minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, Phillips, Crompton,halonix. (REF MODEL: UNECOSURFDLS8WLED830S24BLK-G2)8 Watt |
| 76 | Supply of LED Surface COB Downlighter surface light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% ((minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, Phillips, Crompton,halonix. (REF MODEL: UNECOSURFDLS8WLED830S24BLK-G2)15 Watt |
| 77 | Supply of LED Surface COB Downlighter surface light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% ((minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, Phillips, Crompton,halonix. (REF MODEL: UNECOSURFDLS8WLED830S24BLK-G2)30 Watt |
| 78 | Supply of LED Recessed COB Downlighter energy saving, aesthetically designed, recessed mounted down light with 15° tilt pressure die-cast aluminum heat sink and high efficiency long life COB LED mounted on MCPCB with high efficacy for enhanced lumen output. THD (10% (minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, Phillips, Crompton, halonix. (REF MODEL: UNECOSURFDLS8WLED830S24BLK-G2)15 Watt |
| 79 | Supply of LED Surface/Recessed panel Downlighter polycarbonate housing with integral driver (minimum 2 Year warranty), complete in all respect as per satisfaction of Engineer-in-Charge make havells, Phillips, Crompton, Halonix.12W |
| 80 | Supply of LED Flood light and street light energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. Having Lumen output)= 120 Lumen/per watt and efficiency of 0.9 make havells, Phillips, Crompton, Halonix.100 W street Light |
| 81 | Supply of LED Flood light and street light energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. Having Lumen output)= 120 Lumen/per watt and efficiency of 0.9 make havells, Phillips, Crompton, Halonix.100 W Flood Light |
| 82 | S/E of heavy duty 380mm exhuast fan (minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, bajaj, crompton (ref model : havells Turbo force 1P) |
| 83 | Supply of POST TOP Luminare of 40 W energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution, die-cast aluminium landscape luminaire with high power LED as light source. Unique ring shape LED Engine ensuring soothing, glare free light distribution complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, bajaj, crompton (Equilant to model : havells IMBOLPT40WLED730SYMPCGRYCMP) |
| 84 | P/F Hotel DND sign panel -Dimensions ( L*W* H*) 150*215*15mm millimeter complete in all respect. |
| 85 | Double Bed with Bed Head plus bed platform with footrest.(mattress size 36”x75”) 9’-8”x3”x4’-6” (bed head size) 6`-2`x6`-3`x1`-2` (Bed platform size) 5 mm th. Teak Ply as per approved colour scheme over ¾ ” thick HDHMR Board with melamine polish in semi mat finish and teak wood lipping on edges. Finish as/approved.Upholstery as approved on the Bed Head over 1” th. foam over Ply/Board finish as/approved. Foot rest made of ¾” th. HDHMR board with 5 mm th. teak ply as per approved colour scheme plus teak wood lipping on edges with melamine polish in semi mat finish as/app.Platform to have 12mm thick HDHMR ply of with 1 mm th. laminate on it over Hollock wood frame out of section 3`x1 ¾” finish as/approved shade. Side members 11”x ¾” made of Board with teak ply finish with teak wood beading on edges and Teak wood leg support out of 3” X3” finish as/app melamine polish in semi mat as /app shade and finish.HDHMR Board should be of Action tessa/ Green / Century. |
| 86 | Bed side table1’-6”x1’-4”x1’-9”Made of ¾” th. of HDHMR Board of century/green/Action Tessa make with teakwood beading on edges fixed over as/app design teak ply on all exposed faces and 1 mm laminate on internal faces. Table to have two drawer with soft touch channels of Hafele, Hattic and Dorset make.With with quartz G7 top Front facia of drawers in Teak ply polish as/approved with S.S Handle on the board.Teak wood leg supports out of 2”x 1 ½”finish as/app. Design to match the bed as per approved.Polish melamine in semi mat as /app shade and finish. |
| 87 | Easy Chair With arms and with round back. 2’-6”x2’-5”x2’-9” seat height should be 1’-5”. Upholstery as per approved colour scheme. 4” thick foam of 40 density on seat and 2 ½” thick of 32 density on back over required spring base for seat and back over frame work made of soft wood leg as per design using teak wood sections for outer/exposed members required to give proper shape and strength. Polish as per approved complete in all respect. |
| 88 | Center Table with quartz Top Size:- 2`x2’x1½” T.W. frame of required section out of 2 ½”x1 ½” all around and duly polished as/app colour scheme. Leg as per design using teak wood sections out of 3”x3” as required to give proper shape and strength. Melamine Polish in semi matt finish as per approved colour scheme.Teak wood frame out of 3”x1 ½” fixed with legs on four side finish as/app. complete in all respect . |
| 89 | Wooden Cabinet below LED With Quartz top6’-0”x 1’-3”x2’-6” as/drg.Teak wood leg support out of 3”x1 ½” finish as/app.Wooden cabinet made in ¾” th. HDHMR Board finish with 5 mm th. teak ply with teak wood lipping on edges. Open shelf and block area to be made in ¾” Th. HDHMR Board on sides and front finish with 5 mm th. teak ply with melamine polish in semi mat finish. Shade as approved. |
| 90 | Study Table with quartz top 3’-6”x2’-0”x2’-6”Made in ¾” th. Commercial double Board with 5 mm th. teak ply as approved with teak wood lipping on edges plus drawer with sides and bottom made of 12 mm thick Commercial Board and front facia of the drawer is to be finish with Teak Ply. Drawer Channels should be of soft touch of Hafele, Hattic and Dorset make. 5 mm frosted glass on the center of the study table above drawer. Polish should be melamine in semi mat finish. |
| 91 | Wooden Study Chair Made of Teak wood member of required section finish as approved. 3`th foam of 40 density over 1/2`th ply on seat and 1 plus 1/2`th foam of 32 density with necessary required material. Teak wood frame members below the seat should be out of 3`x1/2` with triangular corners inside.Teak wood legs, arms and back supports as required to given proper shape as per drawing. Framework to be furnished with melamine/semi matt polish. |
| 92 | New Long Mirror (Size 2’-3”x5`-0` ht.) Teak wood frame out of 2 ½” x 1 ½” section duly polished in melamine / semi matt finish cornice, 4 mm thick mirror, over 12 mm thick HDHMR Ply duly fixed on wall as shown in the layout plan. |
| 93 | P/Fixing Cupboard with lugage rack plus fridge unit plus Tea Kettle Shelf. As/Drg. Size:8’-4½” x2’-0”x6’-9”.½” HDHMR board for back, top and bottom finish with 1 mm th. laminate as/app on all exposed area.1 mm Th. laminated top on luggage rack and fridge unit as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions/Shelves to be finished with 1 mm laminate. All necessary hardware of Hafele, Hattic and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg.One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. Above 6’-9” ht. HDHMR board should be of century/green/ Action Tess. |
| 94 | P/F Channel for curtains of high standard quality approved by authorities. complete in all respect.(Channel for main Curtains and Sheer Curtain).... |
| 95 | Curtains as per approved colour scheme. PLEATED Curtain cloth as per approved colour scheme (fixed with channel) Lining cloth of superior quality . Width of the curtain should be 1’-6”after pleating and finished height 8’-6” ht. complete in all respect. |
| 96 | Double quilted Bed Cover App. Size 100” x 108” with foam quilting. Cloth as/app. Colour scheme. Lining cloth of superior quality. Stitching lines as approved. Rate of cloth Rs.350/- per meter. complete in all respect. |
| 97 | New Runner above Bed CoverApp. Size 98” x 30” with foam quilting. Cloth as/app. Colour scheme. Lining cloth of superior quality. Stitching lines as approved. |
| 98 | 6” Th. pocketed Spring Mattress of size 36”x75” Sleepwell/Spring fit, Kurl on and Peps foam make.complete in all respect . |
| 99 | Cushions as/app. Colour scheme with polyfill fillers of superior quality make Recron Certified Microfibre and Ultra Fine Polycot.16”x16” size Cushion cloth As/app. Colour scheme. |
| 100 | P/F Table lamp. Readymade to be selected as per the décor of the room. |
| 101 | P/F Wall Painting with framing (Modern art/Nature theme prints with frame as/selected design and concept. Size: 1’-6”x2’-0” |
| 102 | Persian Carpat for bed side 2`-6`x5`-0` |
| 103 | P/F of Visi Cooler of capacity 380 L with single glassdoor opening, commercial vertical automatic refrigerator, adjustable shelves, wheels/legs (roller), bottle opener with crown holder with 5 star BEE Rating complete in all respect as per satisfaction of EIC (Make - Western, Blue Star, Haier Model- SRC-380-GL) |
| 104 | P/F of Advanced R.O with RO plus UF plus TDS control plus UV LED Tank of capacity 8 L and 20 LPH flow with 1 year complete warranty. complete in all respect as per satisfaction of EIC (Make - Kent, Aquaguard, LG) |
| 105 | P/F of Advanced 5 stage filter R.O for water cooler with 1 year complete warranty. complete in all respect as per satisfaction of EIC (Make - OEM) |
| 106 | P/F of Hard Top Deep Freezer (500 Litres) BEE 5 star rating, double door, convertible deep freezer, dual heavy duty condensor, 70mm PUF thickness, 4 years comprehensive warranty . complete in all respect as per satisfaction of EIC (Make - Haier, Blue Star, Western Model- HFC-500DM5 |
| 107 | P/F of Hard Top Deep Freezer (588 Litres) BEE 5 star rating, double door, convertible deep freezer, dual heavy duty condensor, 70 mm PUF thickness, 4 years comprehensive warranty . complete in all respect as per satisfaction of EIC (Make - Haier, Blue Star, Western Model- HFC-588DM5 |
| 108 | P/F of Hand Blender for kitchen use with stainless steel blades, 2 metre cord length, 1500 watt silent DC motor and 1 year product warranty. complete in all respect as per satisfaction of EIC (Make - Sujata, Phillips, Havells) |
| 109 | P and F of Flying Insect Killer Mild Steel Body high-Voltage Fly Insect Killer Machine, Machine Body:Mild Steel, Fitting: Wall/Ceiling, Power used: 55W U.V Tubes: 2 Nos. 2Feetx 18w, Open Area: 300 SQ.FT Closed Area:600 SQ.FT, Dimension: 630 x 120 x 360 MM complete in all respect as per satisfaction of EIC Make: PESTOP |
| 110 | P/F of wall mounted water heater of 25L capacity, glass coasted anti rust tank and heavy duty heating element with warranty of 5 years on tank. complete in all respect as per satisfaction of EIC (Make - Haier, Havells, Jaquar Model- Monza).... |
| 111 | S/I/T/C of Air Curtain with Sensor and Remote - 410 W (Size 3 Feet) Capacity 0.9 cubic metres, Special Feature Remote Controlled, Product Dimensions 23D x 90W x 22H Centimeters BEE Star Rating 3 Star complete in all respect as per satisfaction of EIC Make: DOLPHY, Eureka, Mitsubishi... |
| 112 | S/I/T/C of Air Curtain with Sensor and Remote - 700 W (5 Feet) Capacity 1520 litres, Cooling Power 700 Watts, Special Feature Remote Controlled, Product Dimensions 22D x 150W x 23H Centimeters complete in all respect as per satisfaction of EIC Make: DOLPHY, Eureka, Mitsubishi... |
| 113 | S/E of Fan with existing fan point complete in all respect as per satisfaction of E.I.C. (Make Havells, Crompton, Bajaj, Orient) complete in all respect as per satisfaction of EIC.Ceiling decorative Fan 1400 mm |
| 114 | [10.4]Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. [Through Rate] |
| 115 | [10.50.1]Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. [Through Rate] |
| 116 | [10.7]Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 [Through Rate] |
| 117 | [10.77]Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. [Through Rate] |
| 118 | [10.8]Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 [Through Rate] |
| 119 | [10.9]Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling. [Through Rate] |
| 120 | [11.2]6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. [Through Rate] |
| 121 | [11.26.1]Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): 1. Flush/ Ruled/ Struck or weathered pointing [Through Rate] |
| 122 | [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [Through Rate] |
| 123 | [11.57]Providing and laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc. complete in all respects as approved by the Engineer-In-Charge. [Through Rate] |
| 124 | [11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [Through Rate] |
| 125 | [11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) [Through Rate] |
| 126 | [11.60]Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. [Through Rate] |
| 127 | [11.68.3]Applying priming coat: 3. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works [Through Rate] |
| 128 | [11.70]`Extra for using White Cement based primer modified with high performance polymers, applied as an undercoat for exterior/interior cementitious surfaces before paint Technical Specifications: i) Degree of whiteness (in terms of reflectance) )93% ii) Fineness (Residue on 63 Micron Sieve) - Minimum 4.0 iii) Bulk Density - 0.8 to 0.9 kg/litreiv) Viscosity by Brookfield, 50rpm, Spindle no RV 05 at 25 - 300cP to 600cP v) Pot Life - Min. 180 minutes vi) Coverage after 1st coat - 80-100 sqft/kg vii) Adhesion cross-cut on 2 coat application after 48 hours - Min. 3B` [Through Rate] |
| 129 | [11.71.1]Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work [Through Rate] |
| 130 | [11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. [Through Rate] |
| 131 | [11.83.1]Painting over the wooden surface with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture [Through Rate] |
| 132 | [11.87.1]French spirit polishing : 1. Two or more coats on new works including a coat of wood filler [Through Rate] |
| 133 | [11.91]Melamine polishing on wood work (one or more coat). [Through Rate] |
| 134 | [11.96.1]Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 1. New work (Two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) [Through Rate] |
| 135 | [12.1.1.1]Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid separately). 1.1. Second class teak wood [Through Rate] |
| 136 | [12.102.1]Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 1. 125 mm [Through Rate] |
| 137 | [12.116]Providing and fixing Bamboo Jaffri/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. [Through Rate] |
| 138 | [12.12.1]Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1. 1.5 mm thick [Through Rate] |
| 139 | [12.157.1.2]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.2. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) [Through Rate] |
| 140 | [12.157.2.3]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.3. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) [Through Rate] |
| 141 | [12.159.1]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 1. With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) [Through Rate] |
| 142 | [12.159.3]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 3. With float glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [Through Rate] |
| 143 | [12.170]Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). [Through Rate] |
| 144 | [12.171]Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). [Through Rate] |
| 145 | [12.172.1]Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F and ISO 11600 1. Up to 5 mm depth and 5 mm width [Through Rate] |
| 146 | [12.172.2]Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F and ISO 11600 2. Up to 10 mm depth and 10 mm width [Through Rate] |
| 147 | [12.3.3.1.1]Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 3.1.1. 2nd class teak wood 50x12 mm [Through Rate] |
| 148 | [12.3.3.1.2]Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 3.1.2. 2nd class teak wood 50 x 20 mm [Through Rate] |
| 149 | [12.32.1.1.1]Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 1.1.1. 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood [Through Rate] |
| 150 | [12.33.1]Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 1. With 2nd class teak wood beading 62X19 mm [Through Rate] |
| 151 | [12.39]Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). [Through Rate] |
| 152 | [12.42]Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). [Through Rate] |
| 153 | [12.59.1]Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 1. 300 mm weighing not less than 330 gms [Through Rate] |
| 154 | [12.97.1]Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 1. 125x75x4 mm [Through Rate] |
| 155 | [12.99.4]Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 4. 150x10 mm [Through Rate] |
| 156 | [13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [Through Rate] |
| 157 | [13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate] |
| 158 | [13.41]Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). [Through Rate] |
| 159 | [21.84.3]Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 3. Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab) [Through Rate] |
| 160 | [22.10.1.2]Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 1.2. Kitchen sink with drain board 510x1040 mm bowl depth 225 mm [Through Rate] |
| 161 | [22.10.2.1]Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 2.1. Kitchen sink without drain board 610x510 mm bowl depth 200 mm [Through Rate] |
| 162 | [22.163.4]Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 4. 250 mm diameter [Through Rate] |
| 163 | [22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. [Through Rate] |
| 164 | [22.182]Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet and over flow pipes. The base support i/c fittings and fixtures for tank shall be paid separately. [Through Rate] |
| 165 | [22.20.2]Providing and fixing in position C.I. plain Nahani Trap conforming to I.S.I. specifications and of self cleaning design with C.P. brass hinged grating with frame complete 2. With 75 mm internal diameter outlet [Through Rate] |
| 166 | [22.202]Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg [Through Rate] |
| 167 | [22.205.1]Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 1. With common burnt clay non-modular bricks of class designation 7.5 [Through Rate] |
| 168 | [22.210.4]Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 4. Rectangular shape 1500x450 mm [Through Rate] |
| 169 | [22.216.1]Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-in-charge. 1. 25 Litres capacity [Through Rate] |
| 170 | [22.216.2]Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-in-charge. 2. 30 Litres capacity [Through Rate] |
| 171 | [22.8.1]Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge). 1. One way [Through Rate] |
| 172 | [22.80.1.1]Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 1.1. 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 [Through Rate] |
| 173 | [22.80.2.1]Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 2.1. 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989 [Through Rate] |
| 174 | [22.81.1]Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 1. 100 mm dia [Through Rate] |
| 175 | [22.82.1]Cutting holes up to 30x30 cm in walls including making good the same: 1. With common burnt clay non-modular bricks [Through Rate] |
| 176 | [22.83]Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. [Through Rate] |
| 177 | [22.87.1]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 1. 15 mm nominal outer dia Pipes [Through Rate] |
| 178 | [22.88.1]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 1. 15 mm dia nominal bore [Through Rate] |
| 179 | [22.88.2]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 2. 20 mm dia nominal bore [Through Rate] |
| 180 | [22.88.3]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 3. 25 mm dia nominal bore [Through Rate] |
| 181 | [22.88.4]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 4. 32 mm dia nominal bore [Through Rate] |
| 182 | [22.88.5]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 5. 40 mm dia nominal bore [Through Rate] |
| 183 | [22.88.6]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 6. 50 mm dia nominal bore [Through Rate] |
| 184 | [22.91.1]Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.External work 1. 15 mm dia nominal bore [Through Rate] |
| 185 | [22.91.2]Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.External work 2. 20 mm dia nominal bore [Through Rate] |
| 186 | [22.91.3]Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.External work 3. 25 mm dia nominal bore [Through Rate] |
| 187 | [22.91.4]Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.External work 4. 32 mm dia nominal bore [Through Rate] |
| 188 | [22.92.1]Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 1. 25 to 40 mm nominal bore [Through Rate] |
| 189 | [22.93.1]Providing and filling sand envelope of grading zone IV or coarser grade,100mm all-round the G.I. pipes in external work : 1. 15 mm diameter pipe [Through Rate] |
| 190 | [22.93.2]Providing and filling sand envelope of grading zone IV or coarser grade,100mm all-round the G.I. pipes in external work : 2. 20 mm diameter pipe [Through Rate] |
| 191 | [22.93.3]Providing and filling sand envelope of grading zone IV or coarser grade,100mm all-round the G.I. pipes in external work : 3. 25 mm diameter pipe [Through Rate] |
| 192 | [22.94.1]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 1. 15 mm nominal bore [Through Rate] |
| 193 | [22.94.2]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 2. 20 mm nominal bore [Through Rate] |
| 194 | [22.94.3]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 3. 25 mm nominal bore [Through Rate] |
| 195 | [22.94.4]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 4. 32 mm nominal bore [Through Rate] |
| 196 | [22.94.6]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 6. 50 mm nominal bore [Through Rate] |
| 197 | [23.21]Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required [Through Rate] |
| 198 | [23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA [Through Rate] |
| 199 | [23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA [Through Rate] |
| 200 | [23.22.2.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.1. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP [Through Rate] |
| 201 | [23.22.2.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.2. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 250 A FP [Through Rate] |
| 202 | [23.22.4.11]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.11. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 8 way ( 8 incoming 3phase*8 outgoing) [Through Rate] |
| 203 | [23.22.4.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing) [Through Rate] |
| 204 | [23.22.4.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.3. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 12 way ( 2 incoming and 10 outgoing) [Through Rate] |
| 205 | [23.22.4.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.4. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 16 way ( 2 incoming and 14 outgoing) [Through Rate] |
| 206 | [23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) [Through Rate] |
| 207 | [23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate] |
| 208 | [23.22.5.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE [Through Rate] |
| 209 | [23.22.5.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.4. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Double pole [Through Rate] |
| 210 | [23.22.5.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.6. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs TRIPLE POLE [Through Rate] |
| 211 | [23.22.5.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.7. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp MCBs FOUR POLE [Through Rate] |
| 212 | [23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE [Through Rate] |
| 213 | [23.22.8.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 8.2. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 100 amp 415 volts [Through Rate] |
| 214 | [23.22.8.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 8.3. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 200 amp 415 volts [Through Rate] |
| 215 | [23.23.1.3]MISCELLANEOUS 1.3. Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- Size 25 mm dia [Through Rate] |
| 216 | [23.23.6.1]MISCELLANEOUS 6.1. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 100 X 50 X 2 mm [Through Rate] |
| 217 | [23.23.8.1]MISCELLANEOUS 8.1. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 2 pair telephone wire [Through Rate] |
| 218 | [23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate] |
| 219 | [23.24.3.3]MS STAND, BUS BAR CHAMBER AND PANELS 3.3. Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S. sheet and fixing with rag bolts on wall or on existing pedestal/angle iron frame including bonding, detachable top and bottom including painting and necessary connection etc. (Aluminium bars). 100 amp 4 bars of 100 cm each (cross section 25 mm x 6 mm) chamber over all size 1.10 m x 45 cm x 18cm [Through Rate] |
| 220 | [23.27.5]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 5. M.S. pedestal of size 1200 mm wide ,1500 mm high ,450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1350 mm x 600 mm x 200 mm above ground level , having a base of size 1500 mm x 750 mm x 250 mm below ground level . 0 0 [Through Rate] |
| 221 | [23.4.1.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A [Through Rate] |
| 222 | [23.4.2.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 2.1. Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A [Through Rate] |
| 223 | [23.4.3.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 3.1. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch Group A [Through Rate] |
| 224 | [23.4.4.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.1. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group A [Through Rate] |
| 225 | [23.4.5.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.1. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A [Through Rate] |
| 226 | [23.5.6.2]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.2. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 2.50 Sqmm(1.1.80mm) [Through Rate] |
| 227 | [23.5.6.3]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) [Through Rate] |
| 228 | [23.5.6.4]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.4. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 6 Sqmm(1/2.80mm) [Through Rate] |
| 229 | [23.5.6.5]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.5. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) [Through Rate] |
| 230 | [23.8.1.6]FITTING AND ACCESSORIES 1.6. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Call bell 220/230 volts musical type [Through Rate] |
| 231 | [23.8.10.1]FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data [Through Rate] |
| 232 | [23.8.10.3]FITTING AND ACCESSORIES 10.3. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 4 Modules [Through Rate] |
| 233 | [23.8.10.6]FITTING AND ACCESSORIES 10.6. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 12 Modules [Through Rate] |
| 234 | [23.8.11.1]FITTING AND ACCESSORIES 11.1. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch [Through Rate] |
| 235 | [23.8.11.11]FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type [Through Rate] |
| 236 | [23.8.11.3]FITTING AND ACCESSORIES 11.3. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 1 way switch [Through Rate] |
| 237 | [23.8.11.4]FITTING AND ACCESSORIES 11.4. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp Socket [Through Rate] |
| 238 | [23.8.11.5]FITTING AND ACCESSORIES 11.5. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket [Through Rate] |
| 239 | [23.8.9]FITTING AND ACCESSORIES 9. Supply and erection direct reading LCD Display Digital Ammetre/Voltmetre ( without CT or PT ) on wall/existing penal complete in all respect with necessary connections [Through Rate] |
| 240 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate] |
| 241 | [24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate] |
| 242 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate] |
| 243 | [24.11.18]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 18. 10 Sq mm 4 core (Arm.) [Through Rate] |
| 244 | [24.11.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 24. 16 Sq mm 4 core (Arm.) [Through Rate] |
| 245 | [24.11.32]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 32. 25 Sq mm 4 core (Arm.) [Through Rate] |
| 246 | [24.11.40]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 40. 35 Sq mm 4 core (Arm.) [Through Rate] |
| 247 | [24.12.48]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITHOUT SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 48. 50 Sq mm 4 core (Arm.) [Through Rate] |
| 248 | [24.14.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) [Through Rate] |
| 249 | [24.14.32]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 32. 25 Sq mm 4 core (Arm.) [Through Rate] |
| 250 | [24.14.46]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 46. 50 Sq mm 3.5core (Arm.) [Through Rate] |
| 251 | [24.2.2.2]LT CABLE 2.2. Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- 16 Sq mm to 35 sqmm 2 to 4 Core [Through Rate] |
| 252 | [24.4.1.2]STREET LIGHT 1.2. 3 metres long 50 mm dia pole duly embedded 0.6 m below ground level. 4.5metres long 50 mm dia pole duly embedded 0.75 m below ground level. [Through Rate] |
| 253 | [24.4.11.1]STREET LIGHT 11.1. Erection of MS/GI/Swaged ( excluding Octagonal ) metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 2.5 metre and up to 4 metre [Through Rate] |
| 254 | [24.4.2.3]STREET LIGHT 2.3. Supply and erection of GI bracket made of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal, suitable for fixing on top of Street Light pole 120 cm long, with 30 cm high suitable size pole cap [Through Rate] |
| 255 | [24.4.4.1]STREET LIGHT 4.1. Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole up to the height of 4.5 metres [Through Rate] |
| 256 | [24.4.4.3]STREET LIGHT 4.3. Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole above 7 metres but up to the height of 9 metres. [Through Rate] |
| 257 | [24.4.5]STREET LIGHT 5. Supply and erection of Single Phase weather proof M.S. box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A Bakelite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on Bakelite sheet in the M.S. box including painting and necessary connections. [Through Rate] |
| 258 | [24.4.6]STREET LIGHT 6. Supply and erection of Three Phase weather proof M.S. box of size 30 cm x 20 cm x 15 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A Bakelite connector, 1 no. 16 amp TP MCB and 4 Nos. 16 amp. neutral links fixed on Bakelite sheet in the M.S. box and necessary connections. [Through Rate] |
| 259 | [24.4.7.2]STREET LIGHT 7.2. Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm dia [Through Rate] |
| 260 | [24.4.8.7]STREET LIGHT 8.7. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 9 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm. [Through Rate] |
| 261 | [30.21]Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete [Through Rate] |
| 262 | [30.22]Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. [Through Rate] |
| 263 | [4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate] |
| 264 | [4.13.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge 1. Ordinary rock [Through Rate] |
| 265 | [5.11]Demolishing mud phaska in terracing and disposal of material within 50 metres lead. [Through Rate] |
| 266 | [5.14]Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. [Through Rate] |
| 267 | [5.2.2]Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 2. In cement mortar [Through Rate] |
| 268 | [5.25]Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. [Through Rate] |
| 269 | [5.29.2]Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2. Of area beyond 3 sq. metres [Through Rate] |
| 270 | [5.43.1]Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1. For thickness of tiles 10 mm to 25 mm [Through Rate] |
| 271 | [5.43.2]Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 2. For thickness of tiles above 25 mm and up to 40 mm [Through Rate] |
| 272 | [5.45]Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. [Through Rate] |
| 273 | [5.7.4]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar [Through Rate] |
| 274 | [6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate] |
| 275 | [6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) [Through Rate] |
| 276 | [6.1.7]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 7. 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) [Through Rate] |
| 277 | [6.1.8]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 8. 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) [Through Rate] |
| 278 | [6.14.1]Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) [Through Rate] |
| 279 | [6.15.1]Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate] |
| 280 | [6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate] |
| 281 | [6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform [Through Rate] |
| 282 | [6.30.4]Centering and shuttering including strutting, propping etc. and removal of form for 4. Shelves (Cast in situ) [Through Rate] |
| 283 | [6.30.5]Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers [Through Rate] |
| 284 | [6.30.6]Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts [Through Rate] |
| 285 | [6.33.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more [Through Rate] |
| 286 | [6.34.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. [Through Rate] |
| 287 | [6.38.1]Providing and fixing up to floor four level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) [Through Rate] |
| 288 | [7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) [Through Rate] |
| 289 | [7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate] |
| 290 | [7.28.2]Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. 2. Cement mortar 1:4 (1 cement :4 coarse sand) [Through Rate] |
| 291 | [9.10.1]Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 1. With residual type petroleum bitumen of grade VG -10 [Through Rate] |
| 292 | [9.11.1]10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 1. With common burnt clay non-modular brick tile of class designation 10 [Through Rate] |
| 293 | [9.17.1]Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase [Through Rate] |
| 294 | [9.18]Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. [Through Rate] |
| 295 | [9.57.2]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameter [Through Rate] |
| 296 | [9.57.3]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3. 150 mm diameter [Through Rate] |
| 297 | [9.58.5.2]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.2. Bend 87.5° 110 mm bend [Through Rate] |
| 298 | [9.58.5.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.3. Bend 87.5° 150 mm bend [Through Rate] |
| 299 | [9.62.2]Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 2. 150 mm diameter [Through Rate] Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
