|
| 1 | KASTURBA GANDHI BALIKA VIDYALAY UNDER LATHIKATA BLOCK |
| 2 | Providing , lifting hoisting laying Reinforced cement concrete of M20 grade in column footings , as per approved designs and drawings having a munimum compressive strength (in work test) 200 Kg./ Square cm in 15cm. Cubes at 28 days after mixing and tests conducted in accordance with I.S. 416 using 12mm to 20 mm size black hard crusher broken granite stone ships of approved quality from approved quarry washed and cleaned (20mm size not to exceeds 25%) to be mixed in concrete mixture with ordinary protland cement (OPC) including noisting, lowering lying an dcompacting concrete by susing vibrators, watering and curing for 28 days centering and shuttering and finishing the exposed surface smooth proving grooves or beads wherever necessary including cost conveyance, loading and unloading royalities and taxes of all materials and cost of all labours sunones , T & P required fo rthe work ect complete in all respect excluding cost and conveyance of HYSD/MS steel and binding wires , and labour charges for straightaining, cutting , bending etc of M.S. rods of for steel and binding |
| 3 | 2ND floor |
| 4 | Column up to Roof level |
| 5 | Window sill Band |
| 6 | CHHAJJA |
| 7 | Roof beam |
| 8 | Stair case |
| 9 | 3RD Floor |
| 10 | Column up to Roof level |
| 11 | CHHAJJA |
| 12 | Roof beam (RB4) |
| 13 | Flyash brick masonay in cemnet mortar of (1.6) with portland slag cement , watering and curing etc. including cost, conveyance, loading and unloading, royalities and taxes of all materials and cost of all lbaour sundries T& P required for the works etc complete in all respect as directed by the Enginner -in-charge. |
| 14 | 2nd floor |
| 15 | 3rd floor |
| 16 | Cold twisted steel reinforcemtn for RCC work including cutting bendingstragntening and binding with 18swg black annealed wire and placing in posting complete. |
| 17 | 2nd floor |
| 18 | 3rd floor |
| 19 | Providing and laying 12 mm cement plaster 1.6 to out side on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction of Engineer incharge |
| 20 | 2nd FLOOR |
| 21 | 3rd FLOOR |
| 22 | Providing and laying 16 mm cement plaster 1.6 to out side on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge |
| 23 | 2nd Floor |
| 24 | 3rd floor |
| 25 | Providing and laying 6 mm cement plaster 1.4 to out side on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge |
| 26 | 2nd floor |
| 27 | 6mm CP(1:4) |
| 28 | Weather Coat two coats to walls with paint of approved shade on new work to give an even shade excluding cost of distemper. Per 1sqm. Data for 10sqm. |
| 29 | 2nd Floor |
| 30 | 3rd floor |
| 31 | Finishing wall surfaces of walls with Plastic Emulsion Paint of approved make and shed , finished smooth and even surface including cost of scafolding , staging charges with cost of all materials , taxes, labour T&P etc complete as per direction of Engineer-in-Charge. (Data for 10 sqm) |
| 32 | 2nd Floor |
| 33 | 3rd floor |
| 34 | Finishing wall surfaces of walls with Acrylic wall putty (Water Based) of approved make and finished smooth and even surface to receive painting including cost of scafolding , staging charges with cost of all materials , taxes, labour T&P etc complete as per direction of Engineer-in-Charge. (Data for 10 sqm) |
| 35 | 2nd Floor |
| 36 | 3rd floor |
| 37 | Providing and painting two coats of synthetic enamel paints over a coat of primer to steel work including sand papering, scaffolding , cost of conveyance, taxes of all materials. T & P labour required to complete the work as per design/ drawing & instruction of Architect/ Engineer-in- charge. |
| 38 | 2nd floor |
| 39 | 3rd floor |
| 40 | Providng and fixing of FRP (PVC)door including frame and all necessary accessories such as tower blot, handles, hinges etc complete in all respects. |
| 41 | Doors /Window frame made out of M.S. angle I.S.A 40mm x 40 mm x 6 mm with integrated frill of M.S. Flat 6mm x 18 mm @ 100 mm c/c spacing horizontally. The frame with be embedded to the wall with M.S. clamps including shutter made out of 18 gauge sheet property welded / embedded with ISA 25mm x 25 mm x 6 mm & provided with 25 mm x 6 mm flat placing diagonally completed in all respect as per the diraction of EIC.The item is inclusive of all fitting fixures such as handle tower bolt stay, hinges , knob , screws, etc with all materials labour T & P etc. |
| 42 | 2nd floor |
| 43 | 3rd FLOOR |
| 44 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. Data for 3.26 sqm. |
| 45 | Fixing vertified tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete excluding cost of precast. |
| 46 | 2nd Floor |
| 47 | Fixing wall tiles in dados skrting on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tile. |
| 48 | 2nd Floor |
| 49 | Fixing chequred tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete excluding cost of precast. |
| 50 | 2nd Floor |
| 51 | Fixing of Granite floor for kitchen platform on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment of match the shades of the tiles including rubbing and polishing complete excluding cost of precast Granite . |
| 52 | Supplying and fixing of UPVC of three track and three pannel sliding windows 50 series duly manufacturedusing UPVC reinforced profilesof 108 mm x 45 mm x 2.5 mm for outer frames and window sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system,structurally reinforced with hot dip galvanised up to 50 micronsof minimum thicknessof 1.5 mm pre fabricatedand welded through fusion weldingthe window frame shall be fitted with 6 mm thickclear toughenedglass of SAINT GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using reinforced large couplerat the site using anchor fasteners,silicon rubber sealant,easy glazing/deglazing at siteetc including cost & conveyance of all materials,accessories,labour charges,materials andproduct confirmingto ASTM D 638-14,EN-477-95 and other applicable codes and standards |
| 53 | GROUND FLOOR |
| 54 | REPAIRING WORK |
| 55 | Providing & laying plain cement concrete 1:3:6 ( 1 cement 3 coarse and 6 graded stone aggregate fo 25 mm nominal size) in foundation and pinth including cost of hoisting, lowering laying concrete, ramming , watering and curing etc. complete to required levels laid in layers not exceeding 15cm thick including cost. Conveyance, loading and unloading, royalties and taxes all materials and cost of all labours, sundnes, T & P required for the work complete including dewatering if required as epr instruciton of Engineer-in- charge. |
| 56 | Providing and laying 12 mm cement plaster 1.6 to out side on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge |
| 57 | Ground floor |
| 58 | 1ST FLOOR |
| 59 | 2nd FLOOR |
| 60 | Providing and laying 16 mm cement plaster 1.6 to out side on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge |
| 61 | Ground floor |
| 62 | 1st Floor |
| 63 | 2nd floor |
| 64 | Providing and laying 6 mm cement plaster 1.4 to out side on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge |
| 65 | Ground floor |
| 66 | 1st floor |
| 67 | CONSIDER 10% OF ABOVE |
| 68 | Weather Coat two coats to walls withapproved shade on new work to give an even shade excluding cost of distemper. Per 1sqm. Data for 10sqm. |
| 69 | Ground Floor |
| 70 | 1st Floor |
| 71 | 2nd floor |
| 72 | Finishing wall surfaces of walls with Acrylic wall putty (Water Based) of approved make and finished smooth and even surface to receive painting including cost of scafolding , staging charges with cost of all materials , taxes, labour T&P etc complete as per direction of Engineer-in-Charge. (Data for 10 sqm) |
| 73 | Ground Floor |
| 74 | 1st Floor |
| 75 | 2nd floor |
| 76 | Finishing wall surfaces of walls with Plastic Emulsion Paint of approved make and shed , finished smooth and even surface including cost of scafolding , staging charges with cost of all materials , taxes, labour T&P etc complete as per direction of Engineer-in-Charge. (Data for 10 sqm) |
| 77 | Ground Floor |
| 78 | 1st Floor |
| 79 | 2nd floor |
| 80 | Providing and painting two coats of synthetic enamel paints over a coat of primer to steel work including sand papering, scaffolding , cost of conveyance, taxes of all materials. T & P labour required to complete the work as per design/ drawing & instruction of Architect/ Engineer-in- charge. |
| 81 | Ground Floor |
| 82 | 1st floor |
| 83 | 2nd floor |
| 84 | Providng and fixing of FRP (PVC)door including frame and all necessary accessories such as tower blot, handles, hinges etc complete in all respects. |
| 85 | Doors /Window frame made out of M.S. angle I.S.A 40mm x 40 mm x 6 mm with integrated frill of M.S. Flat 6mm x 18 mm @ 100 mm c/c spacing horizontally. The frame with be embedded to the wall with M.S. clamps including shutter made out of 18 gauge sheet property welded / embedded with ISA 25mm x 25 mm x 6 mm & provided with 25 mm x 6 mm flat placing diagonally completed in all respect as per the diraction of EIC.The item is inclusive of all fitting fixures such as handle tower bolt stay, hinges , knob , screws, etc with all materials labour T & P etc. |
| 86 | Fixing vertified tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete excluding cost of precast TILES. |
| 87 | Ground Floor |
| 88 | 1st Floor |
| 89 | Fixing wall tiles in dados skrting on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tile. |
| 90 | Gound Floor |
| 91 | 1st Floor |
| 92 | 2.5 cm thick grading concrete (1:2:2) on old roof slab with 6mm down grade size HGCB including cost of hoisting, lowering laying concrete, ramming , watering and curing etc. complete to required levels laid in layers not exceeding 15cm thick including cost. Conveyance, loading and unloading, royalties and taxes all materials and cost of all labours, sundnes, T & P required for the work complete including dewatering if required as epr instruciton of Engineer-in- charge. (Appropiate water prrofing material to be used) |
| 93 | ELECTRICAL WORK |
| 94 | Recessed wiring to Light Point / Fan Point / Exhaust Fan Point / Call Bell Point with 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.0 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked as earth wire including all accesories and connection as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard) |
| 95 | a) Light point |
| 96 | Midium |
| 97 | Short |
| 98 | b) Celling fan point |
| 99 | Midium |
| 100 | Short |
| 101 | c) 5 A plug point |
| 102 | Recessed wiring for 15 / 16 Amp socket outlet with 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked, Phenolic laminated sheet of suitable size ISI marked MS box and earthing point with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor for loop earthing etc. as required, as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard) |
| 103 | Recessed wiring to Sub-Main in 2 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard) |
| 104 | Recessed wiring to Sub-Main in 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard) |
| 105 | Recessed wiring to Sub-Main in 2 X 10 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 4 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard) |
| 106 | Earthing with G.I earth pipe 3 mtr long 40 mm dia ISI mark including accessories and providing machinary enclosure with cover plate having locking arrengement and watering pipe etc. with charcol and salt etc. |
| 107 | Providing and fixing G.I tape 20 mm X 3 mm thick on parapet of surface of wall for lightning conductor complete as per direction of Engineer-in-charge. |
| 108 | Providing and fixing Copper tape 32 mm X 6 mm from earth electrode directly in ground as required. |
| 109 | Supply , fixing and fitting of 11 watt LED light ( make Philips / Bajaj/ Cromption or Equivalent) |
| 110 | Supply & fixing of single spot light of 18 watts complete with 1 no. 18 watt of approved make complete with all necessary fixing materials including termination & labour ( make:- Philips/ Bajaj/ Crompton of Equivalent) |
| 111 | Supply, installation, Testting and commissioni of celling fan 1200 mm sweep 230/250 volts , 50 Hz, complete with suitable, clamp, downrod, blades, connections with 1.5 sq. mm PVC insulated copper conductor cable et as required and fan hook made of 16mm M.S. rod in R.C.C roof complete with all accessories. |
| 112 | Providing and fixing Single Pole MCB with sheet steel enclosure, distribution board on surface / recess complete with tinned copper bus bar , neutral bus bar, earth bar, din bar, detachable gland plate inter connection phospate and powder painted including earthing etc. as per direction of Engineer-in-charge. |
| 113 | ELECTRICAL WORK REPAIRING |
| 114 | Resessed wiring to light point in 18 mm dia nommetalic flexible polythere conduct, confiming to IS-694/1973with 1 sq mm PVC insulated, single core multistard copper wire of ISI marked conforming to IS-694/1990 and earth continuity in 1.22 mm dia HDBC wire with matallic swich board & MS sheet including provision of earth screw, painted with one coat of red oxide and two coats of DA gray enamel paint , conforming to IS -1533 PART-1 1963 with 3mm baklite / Phenolic laminated front cover fixed with sheet steel screws including supply cover fixed with sheet steel screws including supply and fixing of 5A, 250V, flush type switch of IS-3854/1999mounted on C.I circular box having front bakelite cover complete with all accessories and connections |
| 115 | a) Light point |
| 116 | b) Celling fan point |
| 117 | c) SA plug on same board |
| 118 | Recessed wiring to sub main with 2 x 1.5 sq mm 1.1 kv PVC insulated single core multistrand copper wire fo ISI marked conforming to IS-694/1990in 20/25 mm dia non metallic PVC conduit heavy duty conforming to IS-6946/1973 & earth continuity with 2.24mm dia HDBC wire from lighting distribution board to swith board complete with all accessories and connections. |
| 119 | Recessed wiring to sub main with 2 x 2.5 Sq. mm PVC insulated single core multistard copper wire of ISI marked conforming to IS-694/1990 in 20/25 mm dia non metallic PVC conduit heavy duty conforming to IS-6946/1973 & earth continuity with 1.22 mm dia HDBC wire from 16 A DP MCB of main panel board to 1 HP motor and power plug complete with all accessories and connections . |
| 120 | Surface wiring to sub main with 3 x 10 sq mm 1.1. Kv PVC insulated single core multistrand copper wire of ISI marked core multist and copper wire of ISI marked conforming to IS-694/1990 in 32 mm dia 1.63 mm thick rigid m.s. conduit .ISI marked conforming to IS-1653/1972/1973 and earth continuity with 2.03 mm dia HDBC wire complete with all acessories and connection( from LT pole to main panel board & also to BDB) |
| 121 | Supply , fixing an dfitting of 1 x 40 watt 4' long flouroscent tube light fitting ( Patti Type) on wall surface complete with 1 no of 40 watt tube of approved makde complete with all necessary fixing materials including termination and labour ( make Philips / Bajaj/ Cromption or Equivalent) |
| 122 | Supply & fixing of single spot light of 18 watts complete with 1 no. 18 watt of approved make complete with all necessary fixing materials including termination & labour ( make:- Philips/ Bajaj/ Crompton of Equivalent) |
| 123 | Supply, installation, Testting and commissioni of celling fan 1200 mm sweep 230/250 volts , 50 Hz, complete with suitable, clamp, downrod, blades, connections with 1.5 sq. mm PVC insulated copper conductor cable et as required and fan hook made of 16mm M.S. rod in R.C.C roof complete with all accessories. |
| 124 | Supply & fixing of 8 way 1 phase Distribution board conforming toIS -5133/Part-1/1969 with 1 no. 40 amp DP MCB incoming & 6 nos of Miniature 6//10/16 Amp Circuit Breaker of ISI market conforming to IS- 13032/1991 in sheet steel enclosure along with busbar, neutral link, earth bar, din-rall and metalic board coplete with all accessories and connections |
| 125 | P.H WORK |
| 126 | Supplying , fitting , fixing of water closet of CERA make 2073 Orissa Pan(Cello) of size 510 x 400 mm or equivalent of Parryware/ Hindware , duly embedded in cement concrete(1:3:6) using 12mm size b.h.g chips all complete with materials , albour and T& P etc. |
| 127 | Supplying , fitting , fixing of porcelein wash hand basin of size 450mm x 350 mm of CERA make, catalogue no Canon 1012 Wash Basin of Equivalent of Parryware/ Hindware with rog bolts, CI brackets, hole for pillar cock with cast iron/ M.S. brackets painted while including cutting holes in wall and making good to the damages etc. all complete with materials , labour and T& P etc. |
| 128 | Supply , fitting , fixing of ( 500 x 450 mm) bevelled edge mirror of superior glass mounted on 6 mm thk A.C. sheet or ply-wood sheet and fixed to wooden plugs with cromium plated brass screws and washers etc. all complete with materials , labour and T & P etc. |
| 129 | Providing and fixing PVC soil waste and vent pipes |
| 130 | (i) 110 mm dia . |
| 131 | Supplying fitting , fixing of PVC floor traps of the following norminal diameter of outlet of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting holes in walls and making good to the damages etc. all complete with materials, labour and T& P etc. |
| 132 | Providing and fixing PVC plain bend of required degree |
| 133 | (i) 100 mm |
| 134 | Providing and fixing PVC single equal plain junction of required degee with access door, insertion rubber washer 3mm thick, bolts and nuts complete . |
| 135 | (i) 1000x100x100mm |
| 136 | Providing and fixing door piece, insertion rubber washer 3mm thick , bolts & nuts complete . |
| 137 | (i) 110mm |
| 138 | Providing & fixing PVC terminal guard (i) 110 mm |
| 139 | Supplying, fitting, fixing to walls, ceiling and floor upplasticized PVC pipes conforming to I.S. 4985 of class IV ( 10 kg/ cm 2) th efollowing nominal diameter with fittings and clamps includings testing all complete with materials labour and T & P etc. |
| 140 | a) 15mm dia nominal bore |
| 141 | b) 20mm dia nominal bore |
| 142 | c) 25 mm dia nominal bore |
| 143 | d) 32 mm dia nominal bore |
| 144 | e) 40 mm dia nominal bore. |
| 145 | Providing and fioxing brass bib cock of approved quality . |
| 146 | (i) 15 mm nominal bore short body |
| 147 | (ii) 15mm nominal bore long body |
| 148 | Providing and fixing brass stop cock with wall flush of approved quality . |
| 149 | (i) 15 mm nominal bore. |
| 150 | Providing and fixing gun metal gate valve with C.I. wheel of approved qualioty ( screwed end) |
| 151 | (i) 25 mm dia Nominal bore |
| 152 | (ii) 32 mm dia Nominal bore |
| 153 | Supplying fiting , fixing of S.W. Gully trap Grade-A complete with cast iron grating, brick masonry chamber( 250 mm x 250 mm) with R.C.C cover slab as per P.H. specificaiton and design all complete with materials labour and T & P etc. (Excluding cost of gully trap and grating) |
| 154 | Supply all labour , materials and T & P and laying to level and slope and jointing with cement mortar(1:1) for PVC pipes . (Grade-A) of the following diametersas per specification al complete (excluding earth work in trenches)(data for 30 mtr.) (per mtr) S.W. Pipe 150mm dia. |
| 155 | Supplying all materials, labour and T & P for construction of inspection chamber as per P.H. specification and design all ocmplete ( per each) |
| 156 | Supplying, fitting fixing or constructing of 1.20 mtr dia x 2.55 mtr.Deepsoak-way pit with dry brick walling up to2.10mtr. Height and brick work with cment mortar(1:6) for 0.45mtr height of wall at top, cement plaste(1:3)inside and ouside, inside filled with dry brick khoa of 50mm to 100 mm size to a height of 2.00 mtr form bottom. covered by means of 40mm thick R.C.C perforated slat 50 mm thick RCC. Well cover in pieces fitted with iron rings including earth work in excavation and refiling of cavity around the pit etc all complete as per approved design and drawing ( Per each) |
| 157 | Supplying all materials , labour and T & P for construction of inspection chamber as per P.H. specification and design all complete |
| 158 | Providing and placing on terrance (at all floor levels) per liter polyethylene water storage tank ISI:12701 marked capacite indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank ( sintex, Electroplast, star Lots of equivalent having valid ISI license) |
| 159 | Provision of drinking water with source |
| 160 | SPECTIC TANK |
| 161 | Earth work in all kinds of hard soil within 50mtrs initial lead and 1.5 mtrs intial lift including rough dressing and leveling the bed and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.3mtrs depth and as per the direction of the Engineer -in-charge. |
| 162 | Providing and laying plain cement concrete 1:4:8 in foundation and bottom layers of the lank using 40mm size black hare crusher broken ganite metal of conveyance , royality , all taxes complete and providing to proper thickness. Watering and curing for the requied period as per direction fo Engineer- in Charge. |
| 163 | Providing plain cement concrete 1:3:6 with 25 mm size hard black granite crusher broken metal of approved quality from the approved quarry including all labour and T& P for mixing, lifting, lowering, laying and compacting to proper shape & size and finishing the exposed surface smooth with neat cement punning including the cost of scaffolding watering and curing for the required period as per the direction fo Enginer-in charge including cost, conveyance royality, taxes etc of all the materials and labour complete |
| 164 | Brick (230 mm size) masonary work using CB. Bricks having crushing strength between 75 kg to 99 kg/ sqcm. In cement mortar(1:6) duly immersing the bricks for minimum period of six hours in water before use in foundaiton and plinth including cost, conveyance taxes, royalitites, laoding and unloading of all materials and labour and scaffolding , wateirng, curing T& P etc. complete as per the direction fo the Engineer - in charge. |
| 165 | Providign , lifting hoisting and laying reinforced cement concrete (1:1.5:3) with 20 mm crusher broken black H.g. graded chips of approved quality from approved quarry including mixing and compacting to proper shape & size and finishing th eexposed surface smooth with scaffolding , watering and curing for the required period as per the direction of the Engineer- in- charge including all materials cos,t conveyancy, taxes royalities, loading unloading, labour T & P etc. all complete but excluding the cost of steel and centering / shuttering etc. |
| 166 | Providing fixing HYSD reinforcement bars for R.C.C. works of required diameter and approved qualioty with straightening, cutting to sizes bendign & binding, typing the grills and placing in position using binding wire( 18 to 20 gauge) including cost of all labour, material sunderes T & P scaffolding etc. all complete as per specificaiton and the direction of Engineer - in charge. |
| 167 | Providing thick cement plaster with cement mortar( 1:4) including cement punning finishing smooth over brick work of the septic tank with waterproofing cemen tbased compound of approved quality including laying finishign smooth to proper slope and plane as per the direction fo Engineer- in charge. including cost of all materials with conveyance, royality , taxes watering and curing all labour and T& P etc. complete. |
| 168 | a. 16mm thick |
| 169 | Providing lifting and fixing of 450 mm dia C.I. man hole cover with suitable frome with finished cost of all materisl, labours and T& P etc. complete as per the direction fo the Engineer- in charge. |
| 170 | Providing fitting and fioxing of 250 mm S.W tee with 250 mm dia RCC pipe at inlet and outlet of the septic tank inclusive of all labour , T& P sundries, fittings etc as per the direction fo the Engineer- in charge complete |
| 171 | Providing fixing and fitting CL step iron of approved qualty and size with three coats of anticorrosive paint at regular intervals inside the tank incuding cost, conveyance, taxes all comlete and as per the direction of the Engineer - in charge. |
| 172 | Providing and fixing of 50 mm dia HCL pipe and cowl form vent on the two part of the eptic tank including painting three coats with anticorrosive paint all cost, coveyance, taxes etc all complete as per the direction of the Engineer- in charge. |
| 173 | P.H WORK REPARING |
| 174 | Supplying , fitting , fixing of water closet of CERA make 2073 Orissa Pan(Cello) of size 510 x 400 mm or equivalent of Parryware/ Hindware , duly embedded in cement concrete(1:3:6) using 12mm size b.h.g chips all complete with materials , albour and T& P etc. |
| 175 | Supplying , fitting , fixing of porcelein wash hand basin of size 450mm x 350 mm of CERA make, catalogue no Canon 1012 Wash Basin of Equivalent of Parryware/ Hindware with rog bolts, CI brackets, hole for pillar cock with cast iron/ M.S. brackets painted while including cutting holes in wall and making good to the damages etc. all complete with materials , labour and T& P etc. |
| 176 | Supply , fitting , fixing of ( 500 x 450 mm) bevelled edge mirror of superior glass mounted on 6 mm thk A.C. sheet or ply-wood sheet and fixed to wooden plugs with cromium plated brass screws and washers etc. all complete with materials , labour and T & P etc. |
| 177 | Supply, fitting , fixing of Kaddaph Kitchen sink with cast iron/ M.S brackets painted while including cutting holes in walls and making good to the damages etc. all complete wit materials labour and T& P etc. |
| 178 | Providing and fixing PVC soil waste and vent pipes |
| 179 | (i) 110 mm dia . |
| 180 | Supplying fitting , fixing of cost ( Spun) iron floor traps of the following norminal diameter of outlet of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting holes in walls and making good to the damages etc. all complete with materials, labour and T& P etc. |
| 181 | Providing and fixing PVC plain bend of required degree |
| 182 | (i) 100 mm |
| 183 | Providing and fixing PVC single equal plain junction of required degee with access door, insertion rubber washer 3mm thick, bolts and nuts complete . |
| 184 | (i) 1000x100x100mm |
| 185 | Providing and fixing door piece, insertion rubber washer 3mm thick , bolts & nuts complete . |
| 186 | (i) 100mm |
| 187 | Providing & fixing PVC terminal guard (i) 100 mm |
| 188 | Supplying, fitting, fixing to walls, ceiling and floor upplasticized PVC pipes conforming to I.S. 4985 of class IV ( 10 kg/ cm 2) th efollowing nominal diameter with fittings and clamps includings testing all complete with materials labour and T & P etc. |
| 189 | a) 15mm dia nominal bore |
| 190 | b) 20mm dia nominal bore |
| 191 | c) 25 mm dia nominal bore |
| 192 | d) 32 mm dia nominal bore |
| 193 | e) 40 mm dia nominal bore. |
| 194 | Providing and fioxing brass bib cock of approved quality . |
| 195 | (i) 15 mm nominal bore short body |
| 196 | (ii) 15mm nominal bore long body |
| 197 | Providing and fixing brass stop cock with wall flush of approved quality . |
| 198 | (i) 15 mm nominal bore. |
| 199 | Providing and fixing gun metal gate valve with C.I. wheel of approved qualioty ( screwed end) |
| 200 | (i) 25 mm dia Nominal bore |
| 201 | (ii) 32 mm dia Nominal bore |
| 202 | Supplying fiting , fixing of S.W. Gully trap Grade-A complete with cast iron grating, brick masonry chamber( 250 mm x 250 mm) with R.C.C cover slab as per P.H. specificaiton and design all complete with materials labour and T & P etc. (Excluding cost of gully trap and grating) |
| 203 | Supply all labour , materials and T & P and laying to level and slope and jointing with cement mortar(1:1) for salt glazed stone were pipes . (Grade-A) of the following diametersas per specification al complete (excluding earth work in trenches)(data for 30 mtr.) (per mtr) S.W. Pipe 150mm dia. |
| 204 | Supplying all materials, labour and T & P for construction of inspection chamber as per P.H. specification and design all ocmplete ( per each) |
| 205 | Supplying, fitting fixing or constructing of 1.20 mtr dia x 2.55 mtr.Deepsoak-way pit with dry brick walling up to2.10mtr. Height and brick work with cment mortar(1:6) for 0.45mtr height of wall at top, cement plaste(1:3)inside and ouside, inside filled with dry brick khoa of 50mm to 100 mm size to a height of 2.00 mtr form bottom. covered by means of 40mm thick R.C.C perforated slat 50 mm thick RCC. Well cover in pieces fitted with iron rings including earth work in excavation and refiling of cavity around the pit etc all complete as per approved design and drawing ( Per each) |
| 206 | providing and placing on terrance (at all floor levels) per liter polyethylene water storage tank ISI:12701 marked capacite indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank ( sintex, Electroplast, star Lots of equivalent having valid ISI license) Please Enable Macros to View BoQ information |
