|
| 1 | Demolition above G.L. upto two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. works . |
| 2 | Excavation in earth work and disposal of excavated earth upto a lead of 20 metres lift upto 1.50 metres, disposed earth to be levelled and neatly dressed in pick-jumper work. |
| 3 | Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) excluding cost of centring & shuttering |
| 4 | Providing and laying cement concrete 1:2:4 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) including curing complete excluding cost of form work and reinforcement . |
| 5 | Foundation, footings, bases of columns and the like . |
| 6 | Walls (any thickness but not less than 0.1 m) including attached pilasters, buttresses, plinth and string courses etc. |
| 7 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give fair finish including centring, shuttering, strutting and propping etc. |
| 8 | Flat surfaces such as soffits of suspended floors, roofs, landings & the like. |
| 9 | Vertical surfaces such as walls (any thickness). |
| 10 | Providing and laying cement concrete 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) including curing complete excluding cost of form work and reinforcement. |
| 11 | Suspended floor roofs landing and shelves and their support balconies beams gridebressumers and cantilever up to floor to level. |
| 12 | Providing mild steel/Tor steel reinforcement for RCC work including bending, binding and placing in position |
| 13 | Manufacturing, supplying & fixing of MS frame 35x35x5mm with MS sheet 1.6mm thick, complete with locking arrangement etc. |
| 14 | Providing and laying in trenches galvanized mild steel tubes (light grade) including fittings |
| 15 | 80 mm dia |
| 16 | Manufacturing and supplying of wheel valve chamber of size 450x450x450 mm with MS angle iron of size 35x35x4mm && MS sheet 1.66mm thick and also providing extra length of 150 mm of same angie (as tee in the bottom of all four legs for embedding in cement concrete and top opening will provide with hings with locking arrangements also providing hole on three side of chamber for crossing on different size of pipes. Height of the vertival angle not less than 600 ının and as per satisfaction of Engineer in charge. |
| 17 | Making of junction for connection i/e cutting welding, union, nipple for old Main storage tank and distribution pipe line. |
| 18 | 80x32 mm dia. |
| 19 | Providing and fixing C.I sluice valve(with hand wheell as per IS:14846 with upto date ammendments complete of Kilburn, Kirloskar, Leader, KSB, Kartar make with bolts nuis, rubber insertion etc.the tail piece if reqired shall be measured & paid for seperataly including entire carriage of materials with in all leads and lifts complete in all respects. |
| 20 | 1 80 mm dia (Class PN 1.6). Please Enable Macros to View BoQ information |
