|
| 1 | Dismantling of wrought iron or mild steel work of any decription not otherwise provided for, complete all as specified and directed. |
| 2 | Demolition of cement concrete reinforced of any description and in any position, not otherwise specifically provided for, complete all as specified and directed. |
| 3 | Demolition of brick work or stone boulder masonery, built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed. |
| 4 | Demolition of cement concrete un-reinforced of any description and in any position, not otherwise specifically provided for, complete all as specified and directed. |
| 5 | Taking down cement plaster of any description on bricks, PCC block or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 6 | M&L for half brick work with sub class 'B' brick, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1:4, complete all as specified and directed. |
| 7 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 8 | All as per serial item No. 7.00 here-in-above but except bricks. |
| 9 | M&L for 15mm thick rendering on fair faces or brick work or concrete surfaces in cement mortar 1:4 with using water proofing compund and finishing the surface even and smooth without using extra cement, complete all as specified and directed.Note :- WPC shall be measured and paid separately under respective item of this BOQ. |
| 10 | Supply only integeral water proofing compound. |
| 11 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping, kneelers, bed block etc. including necessary from work, complete all as specified and directed. |
| 12 | M&L for two coats of cement base paint over newly plastered surfaces of wall including one coat of primer and preparing the surfaces, complete all as specified and directed. |
| 13 | M&L for waling of random rubble stone masonry, built in cement motar 1:6, uncoursed, well bounded, bedded and solidly hearted, complete all as specified and directed. |
| 14 | All as per serial item No. 13.00 here-in-above but except stones. |
| 15 | M&L for raised pointing to RR masonry in CM 1:4, complete all as specified and directed. |
| 16 | Providing precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in PCC bonders, set in CM 1:6, complete all as specified and directed. |
| 17 | M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains etc, complete all as specified and directed. |
| 18 | M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth with using extra cement, complete all as specified and directed. |
| 19 | M&L for RCC (Nominal Mix) 1:1.5:3 type A-1 (using 20mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 mtr span, complete all as specified and directed. |
| 20 | M&L for RCC (Nominal Mix) 1:1.5:3 type A-1 (using 20mm graded crushed stone aggregates) as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like, complete all as specified and directed. |
| 21 | Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 22 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 23 | M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 24 | M&L for rolled mild steel angle iron/ flat iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc. and similar work, conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed. |
| 25 | S&F in repair/ replacement of galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed. |
| 26 | S&F in repair/ replacement of concertina coil punched type (including spike and handle) with 50/51 turns and dia 600mm, having a 2.6mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electrogalvanized to provide protection against out door exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil steel clips cannect the individule turns of the coil to each other so that it opens up like an accordion. The weight of each coil will be 9 Kgs (+/- 5%) without packing material and coil length 7 to 8 mtr when opened up. Each coil wound with bituminized Hession cloth for providing protective coating, complete all as specified and directed. |
| 27 | Excavation in post holes (or similar holes) each not exceeding 0.50 Cum in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil, complete all as specified and directed. |
| 28 | M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foudation for fencing post, filling in and mass concrete, complete all as specified and directed. |
| 29 | M&L for mild steel bolts, purpose made with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long and dia of neck exceeding 12mm but not exceeding 20mm, complete all as specified and directed. |
| 30 | S&F in repair/ replacement of chain link MS galvanised fencing of mesh size 50mm x 50mm size, complete all as specified and directed. |
| 31 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in cover slabs (for manholes etc), culvert on drain and similar articles with plain faces, set in cement mortar 1:6, complete all as specified and directed. |
| 32 | M&L for two coats of synthetic enamel paint on steel surface over one coat of priming with red oxide zinc chrome of any description over 10cm in width or girth, not otherwise described including preparation of surfaces, complete all as specified and directed. |
| 33 | M&L for preparation of old steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete with spray machine, complete all as specified and directed. |
| 34 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, sub base etc, complete all as specified and directed. |
| 35 | M&L for machine pressed concrete interlocking paver block, glossy finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment, complete all as specified and directed. |
| 36 | M&L for coloured chequred cement concrete tiles of size 30cm x 30cm x 25mm thick each, set, jointed and pointed in neat cement slurry as in floors with grey cement and pigment, laid/ fixed over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 37 | M&L for sand cushoning bed, filling under floors or under paver blocks including spreading, levelling, watering if required, complete all as specified and directed. |
| 38 | Providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) louvers & jallies, 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings and shuttering, complete all as specified and directed. |
| 39 | Dismantling of asbestos cement (corrugated or semi corrugated etc.) sheet as in roof covering including ridges, complete all as specified and directed. |
| 40 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 41 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 42 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets, stuctural steel frame etc, complete all as specified and directed. |
| 43 | S&F 4mm thick non asbestos fibre cement building boards, fixed or laid/ inserted to timber/ GI/ Aluminium grid/ framework with screws, complete all as specified and directed. |
| 44 | S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed. |
| 45 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation or for shafts, wells, cesspits, manholes, pier holes etc, not exc 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in any type of soil, complete all as specified and directed. |
| 46 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed. |
| 47 | Removing excavated material (soil) to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.50 mtr from the starting point, complete all as specified and directed. |
| 48 | Cutting into exising manholes for connecting new drains (internal dia of pipe not exc 200mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregates) smooth finished and reforming benching, complete all as specified and directed. |
| 49 | M&L for concrete bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) including necessary shuttering and supports, complete all as specified and directed.Notes :- (i) Thickness of bed belew barrel of pipe - 10cm. (ii) Width of bed - outer dia of pipe plus 30cm. |
| 50 | All as per serial item No. 49.00 here-in-above, but 200mm bore of pipe. |
| 51 | M&L for reinforced cement concrete pipes, Class NP3, laid and jointed complete with collars, internal diameter 150mm, laid in trenches, complete all as specified and directed. |
| 52 | M&L for reinforced cement concrete pipes, Class NP3, laid and jointed complete with collars, internal diameter 200mm, laid in trenches, complete all as specified and directed |
| 53 | Extra for forming fair finished drain or channel upto 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc, complete all as specified and directed. |
| 54 | S&F in replacement of 110mm bore PVC (SWR) bends of any radius, fixed with rubber ring joint, complete all as specified and directed. |
| 55 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with MS clamps of suitable size, complete all as specified and directed. |
| 56 | Cleaning of PVC/ RCC water tanks of any type and any size, complete all as specified and directed. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
