|
| 1 | Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in soft/lose soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line complete all as directed. |
| 2 | Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm thick complete all as directed. |
| 3 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 4 | Taking up CI/DI water main (incl all fitting) with spigot & socket ends and lead joints incl burning out & recovering lead from pipe of 80 mm bore for relaying / rerouting of serviceable pipe after cleaning complete all as directed. |
| 5 | All as per here-in- above but 100 mm bore. |
| 6 | All as per here-in- above but 150 mm bore. |
| 7 | Relaying of DI/CI/GI pipe 80 mm bore in trenches/ over the masonry pillars after cleaning thoroughly including fittings complete all as directed. |
| 8 | All as per here-in-above but 100 mm bore. |
| 9 | All as per here-in-above but 150 mm bore. |
| 10 | M&L DI pipe of 80 mm bore with spigot and socket end rubber gas cate joint(titon) centrifugally cast class k-7 conforming to IS 8329-2000 laid in trenches/ on surface/ over masonry pillar and connection to old or new position complete all as directed. Cost of joint included in the qoted rate (Make: Electro steel/Tata/ Jindal). |
| 11 | All as per here-in-above but 100 mm bore. |
| 12 | All as per here-in-above but 150 mm bore. |
| 13 | Taking up or down 80 mm bore steel tubing and connection including cleaning for relaying or removal to store from trenches/wall surfaces complete all as directed. |
| 14 | All as per here-in-above but bore of Pipe 50 mm. |
| 15 | All as per here-in-above but bore of Pipe 40 mm. |
| 16 | All as per here-in-above but bore of Pipe 25 mm |
| 17 | All as per here-in-above but bore of Pipe 20 mm |
| 18 | Relaying/re-fixing old 80 mm bore GI tubing or in floor/pillar/wall in new or old position complete all as directed |
| 19 | All as per here-in-above but bore of Pipe 50 mm. |
| 20 | All as per here-in-above but bore of Pipe 40 mm. |
| 21 | All as per here-in-above but bore of Pipe 25 mm. |
| 22 | All as per here-in-above but bore of Pipe 20 mm. |
| 23 | M&L 80 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection in old or news position including fitting like socket /Union/Tee/Reducer Nipple etc complete required will be supplied by Contractor rate for the same is included in the item rate quoted |
| 24 | All as per here-in-above but bore 50 mm |
| 25 | All as per here-in-above but bore 40 mm |
| 26 | All as per here-in-above but bore 25 mm |
| 27 | All as per here-in-above but bore 20 mm |
| 28 | Supply and laying in repair of 3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and inner most layer white coloured with antimicrobial properly) fusion welder PP-R (Poly proplene randon Co-polymer) pipes laid in trenches incl plain PP-R and brass threaded PP-R fittings or flanged joints any type incl connecting up with existing system of grade PN 10, SDR-11 of 90 mm outer dia size complete all as specified and directed. |
| 29 | All as per here-in-above but for size 63 mm outer dia. |
| 30 | All as per here-in-above but for size 50 mm outer dia. |
| 31 | All as per here-in-above but for size 32 mm outer dia. |
| 32 | All as per here-in-above but for size 25 mm outer dia. |
| 33 | All as per here-in-above but for size 20 mm outer dia. |
| 34 | M&L DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot. All socket and flanged upto bore of 200 mm complete all as specified |
| 35 | M&L rubber gasket joint in repair for 80 mm bore CI/DI Pipe with Spigot & Socket ends after connection of old and new position complete all as directed. |
| 36 | All as per here-in-above but size 100 mm bore |
| 37 | All as per here-in-above but size 150 mm bore |
| 38 | Taking of existing US CI Sluice valve of any size, any type upto 150mm bore from 80 mm bore complete all as directed. |
| 39 | S/F 80 mm bore CI Sluice valve PN – 1.6 IS 14846-2000 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position complete all as directed. |
| 40 | All as per above item but 100 mm bore |
| 41 | All as per above item but 150 mm bore |
| 42 | Refixing of Sluice valve 150 mm bore after taking out, refacing of valve spindle,re grinding, including taking part and reassembling, as per existing and complete descaling and proper functioning at site including replacement of new nuts, bolts, washers and gasket as required at site. (New parts will be measured and paid separately under Item No-46 here-in- after reassembling, testing and re-fixing complete all as directed). |
| 43 | All as per above item but size 100 mm bore |
| 44 | M&L for 50 mm bore gate valve gum metal class-II screwed down high pressure with clutch handle screwed both ends for Iron pipe including taking out of old unserviceable gate valve complete all as directed. |
| 45 | All as per above item but size 40 mm bore |
| 46 | All as per above item but size 25 mm bore |
| 47 | All as per above item but size 20 mm bore |
| 48 | S&F in repair PP-R gate valve (Brass insert) as per requirement of site and fixed of 90 mm bore including taking down all as specified and diretected. |
| 49 | All as per above item for size 63 mm bore |
| 50 | All as per above item for size 32 mm bore |
| 51 | All as per above item for size 25 mm bore |
| 52 | M&L for in repair/rectification of leakage in existing rising/delivery CI/DI Pipe Spigot/ socketed end of 100 mm bore including necessary earth work (i.e. excavation, removal & refilling, of trench), Pumping out water from the ditch and rectify the defects by taking out of existing lead and rejoining The same by using necessary additional lead, Lead Wool, Spun Yarn & etc including testing, commissioning of CI Pipe line complete all as directed Spun yarn & other arrangement for rectification of said defects is included in the cost of item complete). |
| 53 | All as per above item but size 150 mm bore |
| 54 | S&F for straight plain brass ferrules (or connecting screws) screwed bolt ends of 20 mm bore Pipe complete all as directed |
| 55 | All as per above item but size 25 mm bore |
| 56 | Supply and Fixing in repair cast iron Non Return Sluice Valve heavy duty with flanged ends, brass spindle any pattern with Brass spindle with GM Check Nut confirming to IS including jointing and jointing material, nuts, bolts, and washer etc complete all as specified on size 100 mm. Make : Ramco, Zoloto, BIR or equivalent |
| 57 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 600x600x600 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. |
| 58 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 900x900x900 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. |
| 59 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 1200x1200x900 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 60 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 1200x1200x900 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
