|
| 1 | Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc including making good the disturbed surfaces to match with the existing complete |
| 2 | Taking down unserviceable main switches, DBs including MCBs, bus bars chambers etc from wall / existing main boards and removing from site complete |
| 3 | M&L for point wiring with single core FRLS, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) drawing through existing conduit pipe including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete for the following :- |
| 4 | One light point controlled by one switch |
| 5 | One ceiling/exhaust fan point controlled by one switch |
| 6 | One socket outlet 5 Amps controlled by one switch on same board |
| 7 | One socket outlet 5 amps controlled by one switch on independent board |
| 8 | One bell point controlled by one bell push switch |
| 9 | All as per item No 3 above but wiring with 2.5sqmm copper wire and 2.5 sqmm earth wire for socket out let 16 Amps on independent board |
| 10 | All as per item No 3 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 sqmm PVC insulated unsheathed copper cable as earth continuity conductor |
| 11 | M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- |
| 12 | One light point controlled by one switch |
| 13 | One ceiling/exhaust fan point controlled by one switch |
| 14 | One socket outlet 5 Amps controlled by one switch on same board |
| 15 | One socket outlet 5 amps controlled by one switch on independent board |
| 16 | One bell point controlled by one bell push switch |
| 17 | All as per serial item No 6 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire. |
| 18 | All as per item No.6 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 sqmm PVC insulated unsheathed copper cable as earth continuity conductor |
| 19 | S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete |
| 20 | S&F Switch piano flush type 15/16 A single pole one way 230 Volts complete |
| 21 | S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete |
| 22 | S&F Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete |
| 23 | S/F Bell push, flush type 5 Amps 230 Volts complete |
| 24 | S&F electronic fan step regulator flush switch type 100/120 watt, 230 Volt complete |
| 25 | S&F ding dong bell, AC, 230 volts, single pole complete |
| 26 | S&F lamp holder, 230 volt AC, PVC / Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb, 6500 K complete all as specified & directed |
| 27 | S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete |
| 28 | S&F modular switch 6/10 Amps, one way, one module 240 volts complete |
| 29 | S&F modular socket, 3 pin 6 Amps,240 volts, 2 module complete |
| 30 | S&F modular switch 16 A, 1 module,240 volts complete |
| 31 | S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete |
| 32 | S&F modular Bell push 6 Amps, one module 240 volts complete |
| 33 | S&F modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete |
| 34 | S&F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C' curve, 240 Volt complete |
| 35 | M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia or higher size, concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete |
| 36 | All as per the description of srl item No 25 above but with 6 sqmm and 6 sqmm as earth wire |
| 37 | S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following no of way :- |
| 38 | 4 way Make: Legrand/ABB/Sahinder |
| 39 | 8 way Make: Legrand/ABB/Sahinder |
| 40 | 12 way Make: Legrand/ABB/Sahinder |
| 41 | S&F loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB 63/100 Amps as incomer and MCB SP as out going complete all as directedMake: Legrand/ABB/Sahinder |
| 42 | S&F MCB DP/SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete of following rating :- |
| 43 | 63 Amps Make: Legrand/ABB/Sahinder |
| 44 | 40 Amps Make: Legrand/ABB/Sahinder |
| 45 | S&F MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete |
| 46 | S&F MCCB 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line DB & connection complete of following ratingMake: Legrand/ABB/Sahinder |
| 47 | 63 amps rating Make: Legrand/ABB/Sahinder |
| 48 | 100 amps rating Make: Legrand/ABB/Sahinder |
| 49 | 125 amps rating Make: Legrand/ABB/Sahinder |
| 50 | S&F in repair of switch piano, flush type, 5/6 Amp, single pole, one way, 230 volts complete |
| 51 | S&F in repair of socket outlet 2 in 1, 3 pin, 5/6 Amp, flush type, 230 volts complete |
| 52 | S&F in repair of switch piano flush type 15/16 Amp, single pole, one way, 230 volts complete |
| 53 | S&F in repair of socket outlet 2 in 1, 3/6 pin 5 and 15 Amp, flush type, 230 volts complete |
| 54 | S&F in repair of Bell Push, flush type, 6 Amp, 230 Volts |
| 55 | S&F in repair electronic fan step regulator switch fiush type 120 watt, 230 Volt complete |
| 56 | S&F in repair of modular switch 10 amps single pole one module, 230 volts |
| 57 | S&F in repair of universal moudlar socket ,10 Amps, 5 pin, 2 module, 230 volts |
| 58 | S&F in repair of modular switch 16/20 amps single pole one module, 230 volts |
| 59 | S&F in repair of modular socket 16/20 amps, 2 module, 230 volts |
| 60 | S&F in repair of modular bell push with indicator 6 amps, one module |
| 61 | S&F in repair of modular fan step regulator 120 watt 2 module , 230 volts |
| 62 | S&F in repair LED Bulkhead luminaire 10 watt of polycarbonate housing and enclosed with acrylic diffuser IP-65 protection incl connection complete all as specified & directed. Make:crompton,halonix,philips |
| 63 | S&F in repair LED Post top lantern luminaire with die cast aluminium spigot, lid cover and clear acrylic cover 40 watt, 5700 K with IP-65 protection incl connection complete. Make:polycab/crompton/havells |
| 64 | S&F in repair wall mounted LED batten with aluminium housing and integrated electronic drive 18/20 watt fixture 4 feet provided for efficient heat dissipation with polycorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete Make: Polycab/Crompton/Havells |
| 65 | S&F in repair wall mounted LED batten with aluminium housing and integrated electronic drive 20-Watt Emergency Inverter Batten| Reserve Plus 4-feet Rechargeable Inverter Batten ,Colour : Cool Day Light Provides up to 4-hour backup, Fully charges in upto 8 hours, 2600mAh long-lasting battery, Bright 100lm/watt outputand integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete Make: Phillips/Crompton/Havells |
| 66 | S&F in repair surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete Make: Phillips/Crompton/Havells |
| 67 | S&F in repair wall mounting bracket decorative luminaire powder coated housing,SS finish fixture with opal glass diffuser suitable for GLS, B-22 lamp incl connection complete all as directed.Make:as per sample |
| 68 | S&F in repair highly efficient round shape downlighter 25 watt, 240 volt, CCT 5700 K with driver suitable for ceiling cutout 225 mm dia incl connection complete. MAKE:crompton,havells,polycab |
| 69 | S&F (in replacement) LED landscape bollard light 10 watt, 230 volt, inverted pyramid tripod type with soft 360 degree distribution, IP-65 protection, incl necessary civil work for grouting & foundation work of suitable size with PCC work complete all as specified and directed. MAKE:crompton,havells,polycab |
| 70 | S&F in repair surface/ceiling mounted LED panel type of size 2ft x 2ft, 36W, 230V, 5700K complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete.MAKE:crompton,havells,philips |
| 71 | S&F in repair of LED linear surface/ suspended fittings, extruded aluminium body with opal polycarbonate diffuser, 38 watt, 4 ft long, CCT 6000 K incl connection complete. |
| 72 | M&L for LED Flood Light luminaire, energy saving & enviornmental friendly, long life diecast aluminium, IP65, with high power LED as light source incl necessary fixing arrangement with clamps of suitable size and connection using 1.5 Sqmm PVC insulated copper cable complete all as directed for following wattage.MAKE:crompton,havells,polycab |
| 73 | 70 Watt |
| 74 | 100 Watt Please Enable Macros to View BoQ information |
| 75 | 100 Watt Please Enable Macros to View BoQ information |
