|
| 1 | Excavating, supplying and filling of local earth (including royalty) bym mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.DSR 2.25(a) Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below DSR15.12.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm .DSR15.23.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 6 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,including cutting the patch in proper shape,raking out joints preparing & plastering the surface of the walls complete ,including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.As per DSR14.1.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 7 | Providing & applying white cement based putty of average thickness 1 mm, of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.As Per DSR 13.80. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior primer applied @ 2.20 kg/10 sqm.As Per DSR 13.48.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 9 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with adjustable lugs with split end tail to each jamb. Profile -B as Per DSR 10.14.1.1Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 10 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal bracesAs per DSR 10.5.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 11 | Painting with synthetic enamel paint of approved brand & manufacture to give an even shade.Two or more coats on new work.As per DSR 13.62.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).As Per DSR 5.3 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roofs, landings, balconies and access platform As Per DSR 5.9.3 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.As Per DSR 5.22.6 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 15 | Providing & laying Vitrified floor tiles of approved Make size 600x600 mm(thickness to be specified by the manufacturer),of 1st quality conforming to IS:15622,of approved make,in all colours,shades, except White,Ivory,Grey,Fume Red Brown,laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand),jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement & matching pigments etc, complete.As Per DSR11.37 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 16 | Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings.This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.As per DSR 18.9.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 17 | Providing & fixing C.P. brass long body bib cock of approved quality confirming to ISI standards of approved make & weighing not less than 690gm. 15mm nominal bore .As per DSR 18.51.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 18 | Providing & fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 of approved make.15 mm nominal bore.As per DSR18.53 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 19 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :As per DSR17.2.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 20 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.As per DSR17.4.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 21 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.As per DSR17.7A Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 22 | Providing & fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete of approved make.As per DSR 17.28.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. Please Enable Macros to View BoQ information |