|
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 2 | M-150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc required for proper completion of the work. (SI 305B) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 4 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage .for all leads; but excluding the cost of centering, shuttering, finishing and inforcement as per direction of the engineer-in-charge, for the following grades of concrete.RCC WORK IN RAFT FOUNDATION AND PLINT BEAM |
| 5 | 12mm thick cement plaster in 1:4 with cement and coarse sand mortar single coat on fair side or half brick wall upto floor two level including curing, supply of all material, labour, T&P etc complete in all respect required for proper completion of the work . (SI. No. 584) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth 1:6:12 (1 cement : 6 coarse sand (zone-III) derived from natural sources : 12 graded stone aggregate 40 mm nominal size derived from natural sources |
| 7 | Providing , laying, spreading and compacting stone aggregates etc. Grading-11 53mm to 22.4 mm (G-111) |
| 8 | Supply and fixing 80mm thick I-shaped mechanically compressed interlocking cement concrete etc. |
| 9 | Earth filling in trenches, plinth and sides of foundation etc. in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming & watering and dressing and all taxes required for proper completion of the work. |
| 10 | Brick work with common with burnt clay (non-modular) brick of class 150 brick work in super structure cement mortar 1:4 (1 cement : 4 coase sand) 305+309 |
| 11 | Sand filling in plinth and under floors including watering, ramming, consolidating and dressing complete including supply of all materials, labour and T&P etc. required for proper completion of work. . ((SI NO255+ Mat.sl no 19) |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage .for all leads; but excluding the cost of centering, shuttering, finishing and inforcement as per direction of the engineer-in-charge, for the following grades of concrete.RCC WORK IN RAFT FOUNDATION AND PLINT BEAM |
| 13 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarseaggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage .for all leads; but excluding the cost of centering, shuttering, finishing and inforcement as per direction of the engineer-in-charge, for the following grades of concrete.RCC WORK IN SLAB ALL WORK ABOVE PLINTH. |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 18 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. |
| 20 | Providing and fixing of self supported arc type roofing with colour coated imported galvalume sheet as per ASTM international standards A792, basemrtel thickness 1.00 mm and total 1.07 mm thick with tolerance +- 1.02mm of width coil 914 mm with tolirence +- 2mm, coating mass AZ150, yield strength 350 MPA including GST and all consumable anchors, fasterners washers, paint and hangers for lighting purpose and including transportation etc. complete in all respect with fixing at site as per requirement of engineer-in-charge at various loaction at mandi hath-path( work will be done by specialised co. PROFLEX of equilvanent co . at site.) including all machine T&P etc. ( Market Rate) |
| 21 | Construction cost of Toilet (Male & Female) and urinal work. Pre fabricated by TATA steel or supreme or Sintex Co. Please Enable Macros to View BoQ information |
