|
| 1 | General servicing of Split type AC machines including all routine & preventive checks/tests/maintenace, cleaning of condenser/evaporator coils with suitable detergent/chemical solution and flushing with high pressure jet of water/blower, filter replacement etc for satisfactory working of the system as per direction of the Engineer In-charge. |
| 2 | 1.5 / 2.0 TR High wall split type AC. |
| 3 | 1.5 TR window type AC. |
| 4 | 3.0 TR Vertical Type Split AC |
| 5 | Leak testing of condenser & evaporator unit for performance and pressure testing etc and repair with brazing as per direction of the Engineer-in-charge. |
| 6 | 1.5 / 2.0 High wall split and window type AC. |
| 7 | 3.0 TR Vertical Type Split AC |
| 8 | Charging / refilling of fresh refrigerant gas for 1.5/2.0/3.0 TR capacity High wall split / window / vertical AC system as per direction of the Engineer-in-charge. |
| 9 | R-410 |
| 10 | Providing and fitting fixing of hermetically sealed compressor for replacement of defective one as per direction of the Engineer-in-charge. (With one year warranty) |
| 11 | 1.5 TR capacity High wall split type AC/ window Type AC |
| 12 | 2.0 TR capacity High wall split type AC. |
| 13 | 3.0 TR capacity vertical split type AC. |
| 14 | Providing and fitting fixing of hermetically sealed copper condenser unit for replacement of defective one as per direction of the Engineer-in-charge. |
| 15 | 1.5/2.0 TR capacity High wall split AC. |
| 16 | 3.0 TR capacity vertical type AC. |
| 17 | Providing and fitting fixing of ODU blower motor of AC systems after rewinding I/C necessary replacement of bush, shaft etc with complete varnishing as per direction of the Engineer-in-charge. |
| 18 | Providing and fitting fixing of scroll motor (A.C type) of indoor unit split type AC system as per direction of the Engineer-in-charge. |
| 19 | Providing and fitting fixing of scroll motor (D.C type) of indoor unit for inverter technology split type AC system as per direction of the Engineer-in-charge. |
| 20 | Providing and fitting fixing of IDU swing motor of indoor unit split type AC system as per direction of the Engineer-in-charge. |
| 21 | Providing and fitting fixing of inverter PCB circuit of Split type AC system for Indoor Unit complete. as per direction of the Engineer-in-charge. |
| 22 | 1.5/2.0 TR split type high wall AC. |
| 23 | Providing and fitting fixing of inverter PCB circuit of Split type AC system for outdoor Unit complete. as per direction of the Engineer-in-charge. |
| 24 | 1.5/2.0 TR split type high wall AC. |
| 25 | Providing and fitting fixing of PCB circuit for non-inverter split type AC system with the same/universal PCB circuit as per direction of the Engineer-in-charge. |
| 26 | 1.5/2.0 TR split type high wall AC. |
| 27 | Repair of PCB Circuit for Successful functioning of split/window AC System as per direction of the Engineer-in-Charge. |
| 28 | Supply, installation of additional length of copper pipe of appropriate size of (5/8\\" (15.88 mm), 1/4”(6.35 mm), 3/8” (9.53 mm) and 3/4”(19.05 mm) or nearest dia. as per manufacturer design for both suction and liquid line with insulation and necessary wiring between indoor and outdoor units for 1.5 / 2.0 /3.0 TR split type high wall,vertical type ACs. |
| 29 | Providing and fabrication of M.S platform for placement of condensing unit by using M.S angel of (50x50x5) mm or (65x65x5) mm size base plate, nuts & bolts/universal bracket (GSS) for ODU of split type AC system including all accessories for on-site installation i/c painting, fitting, fixing grouting by cement mixer as per direction of the Engineer-in-charge. |
| 30 | Dismantling, Shifting and re-installation of 1.5/2.0/2.5/3.0 TR window, split and vertical type AC system as per direction of the Engineer-in-charge. |
| 31 | Providing hard/ coil UPVC pipe of good quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit to nearest disposal as per direction of the Engineer-in-charge |
| 32 | Providing and fitting fixing of accessories during maintenance work of split/window AC as per direction of the Engineer-in-charge. |
| 33 | Capacitor 2.0/2.5/4.0/5.0 µF |
| 34 | Capacitor 25 µF |
| 35 | Capacitor 36 µF |
| 36 | Capacitor 45 µF |
| 37 | Capacitor (50-60) µF |
| 38 | Capacitor (80-120) µF |
| 39 | Terminal Clip |
| 40 | PVC tape (Black tap) |
| 41 | Thermostat for split type AC system |
| 42 | Thermostat for window type AC system |
| 43 | Selector switch for window type AC system |
| 44 | Relay for split type |
| 45 | Relay for window type |
| 46 | Contactor |
| 47 | Coil sensor |
| 48 | Room sensor |
| 49 | Display with sensor |
| 50 | Capillaries/ Dryer |
| 51 | Nitral tape (Arrow tape) |
| 52 | Remote with battery |
| 53 | Connector |
| 54 | Air Filter |
| 55 | Single core copper wire 1.5/2.5 Sq.mm made of (Havels/Anchor) |
| 56 | Supply and installation of additional length of electrical copper wire 4 sq mm size with casing size 01 (One) inch including other materials to connect outdoor unit with electrical panel as per direction of the Engineer-in-charge. |
| 57 | Providing & fitting fixing of fan blade of outdoor unit of window, split, cassette and vertical type AC system as per direction of the Engineer-in-charge. |
| 58 | Providing & charging of compressor oil with capillary complete as per direction of the Engineer-in-charge. |
| 59 | Providing,Fitting, Fixing of G.C.I Shed of two parts slanting with ridge by using MS angles (30*30*5) mm size base plate as per direction of the Engineer-in-charge, Please Enable Macros to View BoQ information |
