|
| 1 | Providing and laying in position cement concrete of specifiedgrade excluding theAll work upto plinth level1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm |
| 2 | 12 mm cement plaster of mix1:6 (1 cement : 6 fine sand) |
| 3 | Providing and laying in position cement concrete of specified grade excluding thecost of centring and shuttering - All work upto plinth level1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved . |
| 5 | Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturerwith water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3), jointing .11.46.1 Size |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead. |
| 7 | Dismantling G.I. pipes (internal work) including excavation and refillingtrenches after taking out the pipes, manually/ by mechanical meansincluding stacking of pipes within 50 metres |
| 8 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)including stacking of useful materials near the site and disposal ofunserviceable materials within 50 metres lead. |
| 9 | Dismantling C.I. pipes including excavation and refilling trenchesafter taking out the pipes, manually/ by mechanical means breakinglead caulked joints, melting of lead |
| 10 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead. |
| 11 | Providing and fixing white vitreous china extended wall mountingwater closet of size 780x370x690 mm of approved shape includingproviding & fixing white vitreous china cistern with dual flush fittingof flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etc |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including |
| 13 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming |
| 14 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tubeupto 1 metre long with S.S. triangular plate to Eureopeantype W.C. of quality and make as approved by Engineer - in |
| 15 | Providing and fixing CP Brass 32mm size Bottle Trap ofapproved quality& make and as per the direction of Engineerin |
| 16 | Providing and fixing CP Brass Single lever telephonic wallmixer of quality & make as approved by Engineer in charge----15mm |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Flexible pipe32 mm dia |
| 18 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face withconcealed fittings arrangement of approved quality and colour, |
| 19 | Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing |
| 20 | Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed |
| 21 | Providing and fixing C.P. brass long nose bib cock of approved qualityconforming to IS standards and weighing not less than 810 gms |
| 22 | Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 |
| 23 | Providing and fixing plain bend of required degree |
| 24 | Providing and fixing heel rest sanitary bend |
| 25 | 75mm dia Sand cast iron S&S pipe as per IS: 1729 |
| 26 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore weighing not less than 40 gms |
| 27 | Providing and fixing PTMT soap Dish Holder having length of 138mm breadth 102mm, height of 75mm with concealed fitting arrangementsweighing not less than 106 gms |
| 28 | Providing and fixing on wall face unplasticised Rigid PVC rain pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap |
| 29 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for 110mm band |
| 30 | Supplying and fixing C.I. cover without frame for manholes 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 33 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shadeNew work with cement primer |
| 34 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface |
| 35 | Finishing walls with textured exterior paint of required shade :13.110.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm |
| 36 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10sqm of approved brand and manufacture Please Enable Macros to View BoQ information |
