|
| 1 | SUB WORK NO:- 01 PROPOSED INTERNAL PATHWAY AND NAMO WALL AT NAMO UDYAN IN RENAPUR FOR NAGAR PANCHAYAT RENAPUR Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 2 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. |
| 3 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). |
| 4 | Supplying & stocking on site 6MM CRUSHED METAL FOR BED CONCRETE sub-base etc. complete |
| 5 | Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . |
| 6 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC withOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand Artificial Sand |
| 8 | Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm.of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete |
| 9 | Providing and laying in situ/ready mix M20 RCC of trap / granite/quartzite/gneiss metal for RCC work of ballast walls, kerb sand box returns including scaffolding, compaction,formwork finishing and curing etc.complete. (excluding reinforcement,with fully automatic microprocessor based PLC with SCADA enabled concrete batch mix plant/pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 10 | Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 11 | Providing uncoursed rubble masonry of trap / granite / quartzite/ gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 12 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete.. |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 14 | Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. |
| 15 | Supplying on site garden soil well sieved 80 % to pass throughI.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma)Item includes Transporting, loading -unloading etc (.Lead charges per 35km.considered Excluding royalty.) |
| 16 | FOR OTHER MATERIALS |
| 17 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender. testing of material by Quality control and certified quality must be use by contractor. Compressive strength of C.C.Cube (Set of 3 cubes) |
| 18 | SUB WORK NO:- 02 PROPOSED CONSTRUCTION OF VIRANGULA KENDRE AT NAMO UDYAN IN RENAPUR FOR NAGAR PANCHAYAT RENAPUR Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 19 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m). |
| 20 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) |
| 21 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand |
| 22 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand |
| 23 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping,compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided andcuring etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand |
| 24 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With naturalsand/V.S.I. quality Artificial Sand |
| 25 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 26 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations,slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 27 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 28 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 29 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete. |
| 30 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.Complete |
| 31 | Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. |
| 32 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 33 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 34 | Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil,grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 35 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excludingthe primer coat.) etc. complete. |
| 36 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 37 | Providing and laying vitrified mirror / glossy finish tiles decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring |
| 38 | Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting |
| 39 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 40 | Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete. |
| 41 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. |
| 42 | Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. |
| 43 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 44 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats.(Excluding the door frame) |
| 45 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm atweight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as rollerbearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito |
| 46 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size,crossings of M.S. flats of size 18 x 5 mm T or E section for runnerof minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil paintingetc. complete. (I.S. 105211983). |
| 47 | In SSR for items of supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates. For the items of sand and crushed metal rates are inclusive of royalty charges.Prevalent Royalty charges shall be separately considered while preparing estimate and shall be part of Schedule-B of tender.Any revision in Royalty charges shall be included in the rate analysis of the respective item. If there is variation in Royalty charges the difference shall be paid extra over the items to the contractor and shall be recovered if the Royalty rates are reduced by Govt.i.e Revenue department [As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.67 Dt.15 May,2015. States that the royalty charges of Rs.141.34/Cu.M. ) are considered. SAND |
| 48 | METAL > 40MM |
| 49 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender. testing of material by Quality control and certified quality must be use by contractor. Compressive strength of C.C.Cube (Set of 3 cubes) |
| 50 | CONCRETE MIX DESIGN |
| 51 | SUB WORK NO:- 03 PROPOSED DEVELOPMENT OF NAMO UDYAN AT RENAPUR FOR NAGAR PANCHAYAT RENAPURGrass Cutting & Cleaning Removing grass, gazer grass and disposing off out of building premises including making cleanthe ground by shovel and phavaras etc. complete |
| 52 | Sand Supply & Laying Providing and filling in the foundation with sand of approved quality including watering,compacting etc.complete. (To be executed withprior approval of Superintending Engineer) |
| 53 | Double Swing With Belt Assembly ( Sr.No. 15 )ChairMGRGeneral Information: Age Group: 3–8 Yrs Product Area:-Dia 6.5Ft Material Specifications:The main frame of the animal merry goround is made up of 25NB & 50NB G.I.pipes. -The stand is made in 65NB G.I.pipes. -The whole structure is mounted on heavy- duty be aring (6309ZZ) permanently lubricated with water sealant. -Bottom rotating Hubis made of 120OD seamless pipe and 48 OD centrepin. -The chairs are made out of 15NB GI Pipes and Fiber Rein forced Plastic (FRP) seatis provided. It a ccommodates four children at a time. Painting done with yellow zinc primer coating and then PU painting.rate as per N.C.C.F.O. INDIA |
| 54 | MULTI ACTIVITY PLAY SYSTEMS-Spiral Slide 2.1Mtr.( Sr.No. 18 ) Spiral slide shall be chute made of FRP (fibre Reinforced Plastic) /LLDPE (Low linear Density Poly Ethylene) having thickness of 4mm. Slide Centre support shall be 80 mm NB „B‟ class GI pipe Landing module shall be supported by 20 mm NB „B‟ class GI pipe. Slide extension platform shall be made from FRP(fibre Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene). The railing shall bemade from 15- and 20-mm NB „B‟ class GIpipe. All pipes shall be powder coated to avoid rusting.rate as per N.C.C.F.O. INDIA |
| 55 | Four Seater Mgr ( Sr.No. 50 ) Ground Space: 2.0 Mtr Día SafePlayArea:3.5MtrDía Structure: The Bucket Seat MGR is Structure made of 40 NB B Class GI Pipe. Mounted stand is made of 80 NB B Class GI Pipe & footrest pipes is made of 20 NB B Class GI Pipe. Structure support fabricated pipe is made of 25 NB B Class GI Pipe. Seat, Base Plate &Bearings: The seats are made of FRP/LLDPE type. LLDPE material used is FOOD GRADE and meets the requirement for standard IS:10146 added with UV stabilizer and antioxidants to protect it from UV rays and oxidization, respectively. Mounted main base plate thickness is 12 mm & housing with seamless pipe Dia of 104 mm & Centre Support Base palte 16 mm thick and Center Rod 50 mm Thick. The Bearing used in this item is of dual Heavy -Duty Ball Bearing 6209 Taper Bearing 32209 of SKF, Tata & FAG Which is permanently Lubricated and is With Water Sealant. Caps , Nut Bolts: All Nut Bolts are G.I /M.S/ Stainless Steel material. Clossing Caps are made up of LLDPE / HDPE /M.S. Nylon cap to product from rain and dust.powder Coating: The Equipment.rate as per N.C.C.F.O. INDIA |
| 56 | Deluxe Slide2.1Mtr. ( Sr.No. 37 ) REC.AGE:-4-12YRS.THE AREA:-4.5MX 0.7 M SAFE PLAY AREA:-5.5M X 1.7M HEIGHT :- 2.1 M This item consists of ISI marked structure. The attractive deluxeSS slide chute shall be made in SS. The stainless steel shall be of 304 grades with 16 SWG. The structure comprises of 20 and 25 mm NB “B” Class G.I. pipe. The center support shall be made in 80mm NB “B” Class G.I. pipe. . The ladder cum railing shall be made up of 20 and25 mm NB “B” Class G.I. Pipe. The platform shall be made up of 14 SWG GI sheets with anti skid for firm foot grip. There shall be triangular steps of 16 SWG GI sheets. The chute has its end such as it causes safe landing of the child.rate as per N.C.C.F.O. INDIA |
| 57 | SHOULDER EXERCISER ( Sr.No. 89 ) rate as per N.C.C.F.O. INDIA |
| 58 | BRIDGE LADDER ( Sr.No. 129 ) rate as per N.C.C.F.O. INDIA |
| 59 | Wave Slide2.1MtrHt.(Maps) ( Sr.No. 24 ) The attractive wave slide chute shall be made up of 4 mm thick FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) materials. The structure shall comprise of 20and 25 mm NB 'B‟ Class GI Pipes. The center support shall be made in 80 mm NB 'B‟ Class GI Pipes. The ladder cum railing shall be made 20 mm and 25 mm NB 'B‟ Class GI Pipes. The platform shall be made up of 14 SWG GI sheet with anti skid for firm foot grip. There shall be triangular steps 16 SWG GI sheet. The chute shall have its end such as it causes safe landing ofthechild.The pipes shall be powder coated to prevent rusting.rate as per N.C.C.F.O. INDIA |
| 60 | OVATE STEPPER ( Sr.No. 86 ) rate as per N.C.C.F.O. INDIA |
| 61 | CHEST PRESS ( Sr.No. 87 ) rate as per N.C.C.F.O. INDIA |
| 62 | CYCLE ( Sr.No. 97 ) rate as per N.C.C.F.O. INDIA |
| 63 | LEG PRESS DOUBLE ( Sr.No. 121 ) rate as per N.C.C.F.O. INDIA |
| 64 | MULTI SEATER SEE SAW ( Sr.No.54 ) rate as per N.C.C.F.O. INDIA |
| 65 | HAND ROWER ( Sr.No.99 ) rate as per N.C.C.F.O. INDIA |
| 66 | FRP MASHROOM BUSH As per Approved Rate |
| 67 | FRP BUTTERFLY GARDEN BENCH As per Approved Rate |
| 68 | TRUNK DUSTBIN As per Approved Rate |
| 69 | PENGUIN DUSTBIN As per Approved Rate |
| 70 | DOLPHIN DUSTBIN As per Approved Rate |
| 71 | Providing & fixing25mm dia bambuas directed16 by Engineer InCharge (Old DSR 2016-17 Page No.292 It No.689 |
| 72 | Sample Estimate for Preparation of Instant Lawn in 100 Sq. mtr area (Depth 20.00 cm) Garden SSR Aurangabad Region-22-23 |
| 73 | Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center 18 including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red leadprimerandtwocoatsofpaintingetc.complete. As per SSR-22-23 Pg.No.224 It No.44.09 Please Enable Macros to View BoQ information |
