|
| 1 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. Make as per direction of the Engineer- incharge Catt. AA as per UPPWD Sch. No.1424 Cat -AA (Bajaj, crompton, Philips, Wipro Make) |
| 2 | Supply & Fixing of 32 MM Dia 1.20 Mtr long G.I Pipe Bracket For Fixing of LED lights complete in all respects with clamp etc as per sanctioned vide |
| 3 | Supply & fixing of as per Design Suitable for Fixing Shackle Insulator , Made out of size 50x6 mm M.S.flat Including all bolts with nuts and washers etc. complete in all respect as per UPSIDC Sch. No. 13.1 |
| 4 | Supply & fixing of 100 x 110 mm shackle insulator 100 x 80 mm pin insulator including GI volt spindle, nuts etc. as pre UPPWD Sch. No. 621 |
| 5 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect rate |
| 6 | Supply & wiring of submain with 2 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P required for proper complation of the work as directed as site by Engineer I/C as Per UPPWD sch No. 289 (Polycab /KEI/ Havells/ Grandley/Gloster Make ) |
| 7 | Supply, Installation & commissioning of 40A TPN Centralized Group control Monitoring/CCMS street light control Panel having communication technology of GSM/GPRS/3G/4G/5G, real time clock with battery backup, controller power consumption <10 W, operating voltage 140 to 270V AC, built in surge protection 4 kv, External surge protection 40kv , Ingress protection IP55, having self protection from short circuit, over voltage, overload, Trip /events and anti theft alert provision. The cubical of panel painted with anti-corrosive alkali and acid proof powder coated paint suitable for Pole/Wall/ Structure mounting provision complete in all respect. (Including SaaS Charges) complete in all respect as per direction of E/I. (as per UPPWD approved make list) |
| 8 | Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint upto10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work.UPSIDC Sch. No.24.20.(A) |
| 9 | Painting letters (Pole no.) 2.5 cm upto 8.0 cm size complete on street light pole/panel/other electrical properties under UPSIDA including cost of all material men and T&P complete in all respect |
| 10 | Supply and laying of aluminium conductor PVC insulated, armoured, served, sheathed level in existing HDPE/DWC/GI pipe complete in all respects (KEI/Havells/Grandley/ Gloster/ /Polycab Make) (as per PWD Sch. No. 501(k) -Sch No. 507) 35sqmm 3.5core |
| 11 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.T&P. 63 mm dia (OD- 63 mm & ID-51 mm nominal) (as per UPPWD approved make list) |
| 12 | Supply laying and Fixing 50 dia Gi pipe trench less Through manual Boggi including trenching 90 C.M. dccp and refilling etc. |
| 13 | Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheathed cable 1100 V grade at a depth of 750 mm beloow ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides ant top. On surface the cable run shall be fixed on MS clamps of suitable size or as directed by Engineer in-charge. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c) (Polycab /KEI/ Havells/ Grandlay/Gloster Make) |
| 14 | supply and fixing of cross clamp of required size fabricated from 50mm x 12mm M.S. flat complete with fan hook including painting etc. complete in all respect. |
| 15 | Supply and laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716 |
| 16 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge. as per UPPWD Sch No. 503 (c) 16sqmm 2 core |
| 17 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge. as per UPPWD Sch No. 503 (c) 35sqmm 3.5 core |
| 18 | Charges for maintenance ,proper watch and ward of entire electrical system of Street Light and High Mast Tower,cables,conductors,poles,panels etc and all other available material as per direction of engineer in charge for road lightng in IA to cover the general supervision for execution of work including dismantling and re fixing of all street light of UPSIDA during the period of AMC for 3 years (01 Electrican + 01 Helpers) as per approved rate of UPSIDA |
| 19 | Cost of all material, spares wire fuses,small accessories required for general maint.,cleaning,oiling etc.to keep the entire installation in perfect working order during AMC period complete in all respect. |
| 20 | Supply,sagging,tensioning,jointing and binding of G.I. No. 6 SWG wire as earth continuity wire complete in all respects including all materiaI labour and T&P for proper completion of work UPSIDC schedule No E11.01 |
| 21 | Supply & fixing of MCPCB with LED & Lance ( 70 to 110 watt) for suitable installed LED street light fittings complete in all respect |
| 22 | Supply & Fixing of Glass suitable for installed LED street light fittings complete with rubber gasket etc. complete in all respect |
| 23 | Supply & fixing of LDR suitable for installed LED street light fittings complete in all respect |
| 24 | Supply & fixing of special protection device (SPD) suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect |
| 25 | S/F of mounting time switch (timer clock) L&T/MDS make complete including all T&P men and material required for proper completion of work |
| 26 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16/35 sq.mm 2/3.5 core cable of 1100 v grade complete |
| 27 | Supply and fixing of 16 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3 mm. Top dia minium 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferntial weld, with accessoies for high mast such as head frame suitable for 12 limminaries & its control gear boxes 1.5 HP power tool moter 3 point suspension system with steel wire rope 6 mm. dia double drum winch including making suitable foundation as per manufature drawing/ site requirment along with foundation bolts nuts, washer, anchor plates etc complete in all respects(With three year All Type Repair & Maintenance) . as per UPPWD Sch. No.652 (Bajaj /Philips/Wipro Make) |
| 28 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 200 watt confirming to IP 66 protection complete in all respects (With 5 Year Gurantee (3+2) Three year all type (including Damge & Theft) Repair And Maintenace & Extra Two Year Gurantee) . Catt. AA as per UPPWD Sch. No.1455 (For High Mast 16 Meter)(Bajaj /Philips/Crompton/Wipro Make) |
| 29 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(e) (25 Amp. TPN) |
| 30 | Supply, installation, testing and commissioning of Chemical Earthing for panel in complete in all respect as per complete. |
| 31 | Supply and fixing of tiranga light light 18 meter roll 220V 120 LED luminaire with driver set confirming to IP 65 protection complete in all respect.(Wipro/Havells/Crompton/Bajaj) |
| 32 | Dismentaling and regrouting of street light tilt/sick bend/ STP Pole in 1:3:6 ratio cement concrete with stone pad including strenghthening of pole by providing additional 4 nos support of 65X65X65 mm angle in suitable length with the help of Welding cutting as per technical specification. |
| 33 | Lowering of 30/16.5 Mtr high mast lighting system complete in T&P men,materialrequired proper completion of work etc. |
| 34 | Less Buy Back cost of old & Defective light/conductor /spares as is whear conditions including dismantaling work as per Analaysis. |
| 35 | Supply & fixing steel tubular pole 9 Metre long designated 410 SP-29 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect.(G.I Bottom) (uppwd Item no 610) |
| 36 | Fabrication,Supply & Fixxing of work information board in M.S frame made by 50 mm dia sqaure pipe of stainless steel grade SS-304 &16 mm thick base plate with back supporting of bracing by MS flat of 25x6 mm and 2.85 Mtr. Long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green colour with white letters as required and shall be fixed at a height of 1.2 Mtr. from ground by providing 0.45x0.45x0.60 Mtr. cement concrete stone complete in all respect. Please Enable Macros to View BoQ information |
