|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (i)Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 2 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.i) 1:3:6 (1 Cement :3 coarse: 2 coarse sand ) :6 graded stone aggregate 20 mm norminal size) |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm (Thirty centimetre) in depth, 1.5 m (One point five metre) in width as well as 10 sqm (ten Square Metre) on plan) including getting out and disposal of excavated earth all lead and lift as directed by Engineer-in-charge and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ) Any loss to the public and private propriety, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. (i)All kinds of soil. |
| 4 | Disposal of excavated earth /denris/ material upto site approved by Municipal Corporation surrounding Shimla upto all leads and lifts as per directions of the Engineer-in-Charge. |
| 5 | P/F Checkerred tiles hydraulic compressed 20 mm thick of specufied size laid in floors , treads of steps and landing on a bed of 25 mm average thickness of cement mortar 1:6 ( 1 cement : 6 sand ) requires ) including rubbing and polishing complete with tiles of following shade (i) MEDIUM , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 6 | Providing and laying 40 mm thick faciory made cement concrete interlocking pave block of M - 30 grade made by block making machines with strong vibratory compaction , of approved sixe , design & shape , laid in requires colour and pattern over and includes 50 mm thick compacted bed of coarse sand , filling the joints with line and sand etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 7 | Providing and fixing vitreous china washdown , water cliset European type . W>C pan ) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1 Cement : 1 sand ) (Seat and over to be measured & paid for separately ) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 8 | Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. 1 SOLID TYPE (a) White plastic seat and cover. CERA MAKE IVORY. |
| 9 | Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 10 | Providing and fixing 8 mm dia C.P / S.S jet with flexible tube upto 1 metre long with S.S triangular plate to European type W.C of quality , including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
