|
| 1 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Up to 10 mm thick. |
| 2 | Providing and fixing 100 mm pine wood plain lining tongued and grooved, including wooden plug complete with necessary screw including priming coat on unexposed surface. 10 mm thick. |
| 3 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087marked, to frame, backing or studding with screws etc. complete (Frames,backing or studding to be paid separately): 12 mm thick. |
| 4 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., |
| 5 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30 mm thick |
| 6 | Providing & fixing upto floor five level precast cement concrete hallow blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size). |
| 7 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand). |
| 8 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 9 | Finishing walls with Acrylic Smooth exterior paint of required shade : Newwork (Twoormorecoat [email protected] ltr/10 sqmover and Including priming coat of exterior primer applied @ 2.20 kg/10 sqm |
| 10 | French spirit polishing :Two or more coats on new works including a coat of wood filler |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class Kail wood. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. (Buddha Gold Paint) |
| 13 | Steel work in built up section (round, square or rectangular hollow tubes angle chequerred sheet etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes. chequerred plate 10 mm thick. |
| 14 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic molded frame of approved make and shade with 6 mm Thick hard board backing. |
| 15 | Providing and fixing water heater (gyeser) of approved brand and quality. 25 Litre capacity. |
| 16 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 250x10 mm |
| 17 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: |
| 18 | Providing and fixing bright finished brass sliding bolts with screws etc. complete : 300 mm |
| 19 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 20 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : |
| 21 | Providing and laying in position specified grade of cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 22 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 23 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2x 1.50 sqmm + 1x 1.50 sqmm earth wire. |
| 24 | 2x 2.50 sqmm + 1x 2.50 sqmm earth wire. |
| 25 | 2x 4.00 sqmm + 1x 4.00 sqmm earth wire. |
| 26 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch |
| 27 | 3 pin 5/6 A socket outlet |
| 28 | 15/16 A SS combined |
| 29 | TV antenna socket outlet |
| 30 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 31 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 32 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 33 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4+18) Double doors. |
| 34 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6/16 amp. |
| 35 | DP 40 Amp. |
| 36 | Supplying and fixing of following sizes of medium class PVC conduit/casing along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm. |
| 37 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 38 | LED type conceal light 15 watt including cutting of hole etc as required. |
| 39 | 20 watt LED tuble light fitting equivalent make and model philips/cromption greaves. |
| 40 | Supply and fixing batten angle holder with PVC square box with LED Bulb 9 Watt including making onnection etc complete. |
| 41 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 42 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 43 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed inposition with necessary stainless steel screws etc. Budloo/Fir wood. |
| 44 | Providing and fixing flat pressed particle board with teak facing on one side including fixing with iron screw and priming coat on unexposed surface. 6mm thick. |
| 45 | Providing and fixing pre laminated 12 mm thick flooring of approved brand as per the direction of Engineer-in-charge. Complete job AC-4, including carriage. |
| 46 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (PartI) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 47 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm o fall T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mmthick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. |
| 48 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 49 | Finishing walls with DeluxeMulti surface paint system for interiors and exteriorsusing Primer as permanufacturers specifications :Two or more coats applied on walls @1.25 ltr/10sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 50 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 51 | Constructing R.C.C septic tank including associated works. a) Excavation ( in all types of soil ), back filling & disposal of surplus excavated earth as directed at site. b) 2nos. SFRC heavy duty manhole cover 600 mm dia with lifting lugs & frame. c) 150mm thick Foundation conc.1:2:4. d) 12 mm thick 1:3 plastering on inside & rough plaster on outside. e) R.C.C top slab ( 1:2:4 ) Size 3x1.5x1.2m depth. Septic tank as described above. |
| 52 | Constructing soak pit(size-1.5m dia & 1.50m depth) as per detail drawing including following associated works. a) Brick chamber 600 x 600mm with dry joints. b) Brick aggregate filling inside soak pit. c) Excavation ( in all types of soil ), back filling & disposal of surplus earth as directed at site. d) 1no. SFRC heavy duty manhole cover 600mm dia with lifting lugs & frame. Cost include all associated civil works like excavation , back filling & disposal of surplus excavated earth as directed at site. |
| 53 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 54 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.Flexible pipe 32 mm dia. |
| 55 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge |
| 56 | Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 57 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 58 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) by way of self regulating heat trap cable / K -flex wire 19 mm / tape/ rock wool / chicken mesh /black polythine/28/26 guage aluminium sheet with screws including labour charge . complete as per direction of Engineer in Charge. PN-16 pipe , 25mm OD(SDR-7.4) |
| 59 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) by way of self regulating heat trap cable / K -flex wire 19 mm / tape/ rock wool / chicken mesh /black polythine/28/26 guage aluminium sheet with screws including labour charge . complete as per direction of Engineer in Charge. PN-16 pipe , 32mm OD(SDR-7.4) |
| 60 | Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material a) 75mm |
| 61 | b) 110mm |
| 62 | Providing and fixing ball valve (PP-R) of approved quality, High or low pressure, with plastic floats complete.25 mm nominal bore. |
| 63 | Providing and fixing ball valve (PP-R) of approved quality, High or low pressure, with plastic floats complete.32 mm nominal bore.(PPR) |
| 64 | Providing and fixing 75mm PVC floor or Nahani trap. |
| 65 | Providing and fixing over head shower |
| 66 | Providing and fixing toilet paper holder c.p brass |
| 67 | Providing and fixing soap dish |
| 68 | Providing and fixing towel rail. 750 mm long. |
| 69 | Providing and fixing towel ring |
| 70 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screw and washers complete. |
| 71 | Providing and fixing CP brass basin mixer pillar tap of approved quality and make |
| 72 | Providing and fixing CP Telephonic wall mixer of standard design and approved quality and make |
| 73 | Providing and fixing CP brass bib cock of approved quality and make |
| 74 | Providing and fixing CP brass angle valve cock of approved quality and make |
| 75 | Providing and fixing floor jali (circular type) |
| 76 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 3.1 mm of 79mm length and 62mm breadth weighing not lessthan 45 gms. |
| 77 | Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm. |
| 78 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including K -flex wire 19 mm / tape/ rock wool / chicken mesh /black polythine/28/26 guage aluminium sheet with screws including labour charge . complete as per direction of Engineer in Charge |
| 79 | Providing and fixing 1 Hp water motor pump |
| 80 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 81 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Please Enable Macros to View BoQ information |
