|
| 1 | Chisel – 1”Brand: Anant or equivalent |
| 2 | Chisel – ½”Brand: Anant or equivalent |
| 3 | Chisel – ¾”Brand: Anant or equivalent |
| 4 | Hammer – 200 gm |
| 5 | Measuring Tape – 3 mtr |
| 6 | Hacksaw Frame |
| 7 | Sickle |
| 8 | Right Angle |
| 9 | PliersBrand: Taparia or equivalent |
| 10 | Screw Driver SetBrand: Taparia or equivalent |
| 11 | Vernier Caliper |
| 12 | Level Patti |
| 13 | Extension Board |
| 14 | CylinderCommercial |
| 15 | Gas Pipe |
| 16 | T-Connection |
| 17 | Heating Torch |
| 18 | Regulator |
| 19 | Bench Vise |
| 20 | Straightening Jig |
| 21 | Spray GunBrand: Captain or equivalent |
| 22 | Pipe for Polishing |
| 23 | Hand Planner – 14” |
| 24 | Spray Polish Measuring Vessels (50, 100, 200, 500 ml & 1 L each) |
| 25 | Ring Spanner 14×15 |
| 26 | Ring Spanner 16×17 |
| 27 | Patti Spanner 14×15 |
| 28 | Patti Spanner 16×17 |
| 29 | C-Clamp – 8” |
| 30 | Half Round File |
| 31 | Spade |
| 32 | Pickaxe |
| 33 | Crowbar |
| 34 | Bamboo Nail Jigs For 4 mm |
| 35 | Bamboo Nail Jigs For 8 mm |
| 36 | Bench Circular SawBrand: Garnet or equivalent |
| 37 | Electric Drill Machine (GSB 10 RE)Brand: Bosch or equivalent |
| 38 | Grinder Machine (GWS 750-100)Brand: Bosch or equivalent |
| 39 | Cut-off Machine (GCO 2000)Brand: Bosch or equivalent |
| 40 | Electric Extension Box |
| 41 | Plywood Cutter – 4”Brand: Skill Bosch or equivalent |
| 42 | Plywood Cutter – 7”Brand: Skill Bosch or equivalent |
| 43 | Digital Vernier Caliper |
| 44 | Heavy Machinery |
| 45 | Bamboo Turning MachineBamboo Turning Machine (Stand Mounted)(One set of carbide-tipped tools, Motor capacity: 2 HP,Starter included, Maximum working length: 4 feet) |
| 46 | Planning Machine9” × 48” Surface Planer with Circular Saw Attachment (Open Stand)(Surfacing capacity: 228 / 9” Length of surface table: 1220/ 48” Rebating capacity: 12.5 / ½” Cutter block diameter: 95 / 3.75” Cutter block speed: 4000 RPM Standard cutter block code: 2B Circular saw table size: 560 × 280 / 22 × 11”) Up/down movement of saw table: 75 / 3” Max circular saw diameter: 300 / 12” Power required: 2 HP, 1440 RPM Electric Motor: 2 HP AC, 415V, 3 Phase with DOL starter Approx. machine weight: 150 kg) |
| 47 | External Knot Removing MachineBamboo External Knot-Removing cum Skin-Finishing Machine (Heavy Duty)(Motor: 2 HP Starter included Carbide-tipped external knot-removing cutter) |
| 48 | Cross-Cutting MachineBamboo Cross-Cut Machine(Motor: 2 HP (Crompton Make) or equivalent Starter: L&T Make or equivalent Carbide-tipped circular saw: 400 mm Dynamically balanced spindle Germany-made tungsten carbide TCT saw Maximum cutting capacity: 140 mm) |
| 49 | Bench Drill MachinePillar Drill Machine – 1”(Wood/Bamboo drilling capacity: 1 inch One set of tools included Motor power: 1 HP, 3 Phase) |
| 50 | Belt Sanding MachineBelt & Disc Sander – Belt Sanding Machine 6 Inch(Disc diameter: 6 inch Power consumption: 370 W Rated voltage: 110–240 V No-load speed: 2850 RPM Power Source: Electric Frequency: 50 Hz Sand Pad size: 100 × 914 mm Disc paper size: 150 mm Belt Paper and Disc Paper Grit: 80# Base material: Cast Iron Weight: 16.5 kg Application: Wood, Bamboo, Jade & Plastic) |
| 51 | 130W Double Head CO₂ Laser Cutting Machine for MDF/Wood(Working Area: 1400 mm × 1000 mmLaser Type: CO₂ LaserLaser Power: 130W (Double Head)Cooling System: Water-CooledAir Requirement: Compressed AirCutting Material: Bamboo, MDF, WoodBrand: SCL or EqivalentMachine Dimensions: 1400 mm × 1000 mmPower Source: Laser TubeOperating Voltage: 240VMachine Type: MDF/Wood Laser Cutting Machine) Please Enable Macros to View BoQ information |
