|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan: In all kinds of soils |
| 2 | Ordinary rock |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) & for shafts, wells, cesspits and the like not exceeding 10 sqm on plan: In all kinds of soils |
| 4 | Ordinary rock |
| 5 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth: In all kinds of soil |
| 6 | Ordinary rock |
| 7 | Earth work in bulk excavation by mech means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge: In all kinds of soils |
| 8 | Ordinary rock |
| 9 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 10 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 11 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth. |
| 12 | Beyond 60 cm girth upto and including 120 cm girth. |
| 13 | Beyond 120 cm girth upto and including 240 cm girth. |
| 14 | Above 240 cm girth |
| 15 | P/mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 16 | Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing. |
| 17 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : |
| 18 | Second class Kail wood |
| 19 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 20 | 100 mm and 150 mm dia GI pipes |
| 21 | 65 mm and 80 mm dia GI pipes |
| 22 | 40 mm and 50 mm dia GI pipes |
| 23 | 25 mm and 32 mm dia GI pipes |
| 24 | 15 mm and 20 mm dia GI pipes |
| 25 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 26 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : |
| 27 | Above 40 mm nominal bore |
| 28 | 15 - 40 mm nominal bore |
| 29 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) |
| 30 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. |
| 31 | 100 mm dia pipes |
| 32 | 125 mm dia pipes |
| 33 | 150 mm dia pipes |
| 34 | 200 mm dia pipes |
| 35 | 250 mm dia pipes |
| 36 | 300 mm dia pipes |
| 37 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 400 mm dia sluice valve including cost of salvaged material. |
| 38 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 80 mm dia sluice valve upto 400 mm dia sluice valve including cost of salvaged material. |
| 39 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel only. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve including cost of salvaged material. |
| 40 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of Gun metal only. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve including cost of salvaged material. |
| 41 | Decamping of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing / fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc. complete job |
| 42 | Providing / fixing of M.S double collers/ arresting of leakages by way of welding including all sorts of carriages( 0.45 mtr to 0.75 mtr) complete job. |
| 43 | 80 mm dia |
| 44 | 100 mm dia |
| 45 | 150 mm dia |
| 46 | 200 mm dia |
| 47 | Providing / fixing of double collers, G.I./ M.S. for arresting of leakages by using led & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.) |
| 48 | 40 mm dia |
| 49 | 50 mm dia |
| 50 | 65 mm dia |
| 51 | 80 mm dia |
| 52 | 100 mm dia |
| 53 | 150 mm dia |
| 54 | 200 mm dia |
| 55 | Providing and fixing including testing, commissioning & fabricating at site M.S pipe Specials Etc. & all sorts of carriages upto site of work, as per requirement at site complete job. |
| 56 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. |
| 57 | Lighting points |
| 58 | Heating points |
| 59 | Supply/ fixing of pipe specials from open market, if not available in the Divisional stores of ISI marked standard make. |
| 60 | 100 mm dia G.I Union |
| 61 | 80 mm dia G.I Union |
| 62 | 65 mm dia G.I. Union |
| 63 | 50 mm dia G.I. Union |
| 64 | 40 mm dia G.I. Union |
| 65 | 25 mm dia G.I. Union |
| 66 | 20 mm dia G.I. Union |
| 67 | 80 mm dia G.I. Elbow |
| 68 | 65 mm dia G.I. Elbow |
| 69 | 50 mm dia G.I. Elbow |
| 70 | 40 mm dia G.I. Elbow |
| 71 | 25 mm dia G.I. Elbow |
| 72 | 20 mm dia G.I. Elbow |
| 73 | 80 mm dia G.I. Socket |
| 74 | 65 mm dia G.I. Socket |
| 75 | 50 mm dia G.I. Socket |
| 76 | 40 mm dia G.I. Socket |
| 77 | 25 mm dia G.I. Socket |
| 78 | 20 mm dia G.I. Socket |
| 79 | 80 mm dia G.I. Nipple upto 10\\" |
| 80 | 65 mm dia G.I. Nipple upto 10\\" |
| 81 | 50 mm dia G.I. Nipple upto 10\\" |
| 82 | 40 mm dia G.I. Nipple upto 10\\" |
| 83 | 25 mm dia G.I. Nipple upto 10\\" |
| 84 | 20 mm dia G.I. Nipple upto 10\\" |
| 85 | 15 mm dia G.I. Nipple upto 10\\" |
| 86 | 25x25x20 mm dia G.I. Equal Tee |
| 87 | 40x40x25 mm dia G.I. Equal Tee |
| 88 | 50x50x40 mm dia G.I. Equal Tee |
| 89 | 65x65x50 mm dia G.I. Equal Tee |
| 90 | 80x80x65 mm dia G.I. Equal Tee |
| 91 | 25x20 mm dia Socket/ Reducer |
| 92 | 40x25 mm dia Socket/ Reducer |
| 93 | 50x40 mm dia Socket/ Reducer |
| 94 | 65x50 mm dia Socket/ Reducer |
| 95 | 80x65 mm dia Socket/ Reducer |
| 96 | 25x20 mm dia Elbow/ Reducer |
| 97 | 40x25 mm dia Elbow/ Reducer |
| 98 | 50x40 mm dia Elbow/ Reducer |
| 99 | 65x50 mm dia Elbow/ Reducer |
| 100 | 80x65 mm dia Elbow/ Reducer |
| 101 | 100mm dia Elbow |
| 102 | 100mm dia Equal Tee |
| 103 | 100 mm dia G.I. Bend |
| 104 | 80 mm dia G.I. Bend |
| 105 | 65 mm dia G.I. Bend |
| 106 | 50 mm dia G.I. Bend |
| 107 | 40 mm dia G.I. Bend |
| 108 | Re-threading of damaged pipe ends including carriage from site to workshop and back. |
| 109 | 20 mm dia |
| 110 | 25 mm dia |
| 111 | 40 mm dia |
| 112 | 50 mm dia |
| 113 | 65 mm dia |
| 114 | 80 mm dia |
| 115 | 100 mm dia |
| 116 | Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job. |
| 117 | 5 KV to 10 KV |
| 118 | 11 KV to 20 KV |
| 119 | 21 KV to 30 KV |
| 120 | Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution complete job. |
| 121 | Using buckets, ropes etc. Manually |
| 122 | Through washout by Mix silt with water |
| 123 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete |
| 124 | 25 to 40 mm nominal bore |
| 125 | 50 to 80 mm nominal bore |
| 126 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 127 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 128 | Replacement of old damaged G.I. Gate valves/ Sluice valve by providing / fixing of new Gate valves/ Sluice valve including cost of nuts, bolts, rubber insulations of ISI marked standard make all carriages upto site of works, complete and providing of check certificate from the standard manufacturer. |
| 129 | 100 mm dia Gate valve |
| 130 | 80 mm dia Gate valve |
| 131 | 65 mm dia Gate valve |
| 132 | 50 mm dia Gate valve |
| 133 | 40 mm dia Gate valve |
| 134 | 25 mm dia Gate valve |
| 135 | 20 mm dia Gate valve |
| 136 | 300 mm dia Sluice valve |
| 137 | 250 mm dia Sluice valve |
| 138 | 200 mm dia Sluice valve |
| 139 | 150 mm dia Sluice valve |
| 140 | 100 mm dia Sluice valve |
| 141 | 65 mm dia Sluice valve |
| 142 | 50 mm dia Sluice valve |
| 143 | Welding, including transportation of plant at site complete |
| 144 | By gas plant |
| 145 | By electric plant |
| 146 | Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport below 100 mm dia. |
| 147 | G.I/C.I pipe avg. lead upto 05 KMs |
| 148 | G.I/C.I pipe avg. lead beyond 5KMs to 10KMs |
| 149 | G.I/C.I pipe avg. lead beyond 10KMs to 20KMs |
| 150 | G.I/C.I pipe avg. lead beyond 20KMs |
| 151 | Sand & Agg. 20 mm avg. lead up to 5KMs |
| 152 | Sand & Agg. 20 mm avg. lead beyond 5KMs to 10Kms |
| 153 | Sand & Agg. 20 mm avg. lead beyond 10KMs to 20KMs |
| 154 | Sand & Agg. 20 mm avg. lead beyond 20 Kms |
| 155 | 40 mm Agg. avg. lead of upto 5KMs |
| 156 | 40 mm Agg. avg. lead beyond 5Kms to 10KMs |
| 157 | 40 mm Agg. avg. lead beyond 10KMs to 20KMs |
| 158 | 40 mm Agg. avg. lead beyond 20KMs |
| 159 | Stone soiling avg. lead of upto 5KMs |
| 160 | Stone soiling avg. lead beyond 5KMs to 10 KMs |
| 161 | Stone soiling avg. lead beyond 10Kms to 20 Kms |
| 162 | Stone soiling avg. lead beyond 20Kms |
| 163 | Carriage of pipes from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport |
| 164 | 100 mm dia DI/ GI pipes upto 5 KMs |
| 165 | 100 mm dia DI/ GI pipes lead avg. beyond 5kms to 10 kms |
| 166 | 100 mm dia DI/ GI pipes lead avg. beyond 10kms to 20 kms |
| 167 | 100 mm dia DI/ GI pipes lead beyond 20 kms |
| 168 | 125 mm dia DI/ GI pipes lead upto 5Km |
| 169 | 125 mm dia DI/ GI pipes lead beyond 5kms to 10 kms |
| 170 | 125 mm dia DI/ GI pipes beyond 10 Km to 20 kms |
| 171 | 125 mm dia DI/ GI pipes beyond 20 kms |
| 172 | 150 mm dia DI pipes upto 5 kms |
| 173 | 150 mm dia DI pipes beyond 5 kms to 10 kms |
| 174 | 150 mm dia DI pipes beyond 10 kms to 20 kms |
| 175 | 150 mm dia DI pipes beyond 20kms |
| 176 | 200 mm dia DI pipes upto 5 kms |
| 177 | 200 mm dia DI pipes beyond 5 kms to 10 kms |
| 178 | 200 mm dia DI pipes beyond 10 kms to 20 kms |
| 179 | 200 mm dia DI pipes beyond 20kms |
| 180 | Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour |
| 181 | Cement for an avg. lead upto 50 mtr. |
| 182 | Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 183 | Steel for an avg. lead upto 50 Mtr |
| 184 | Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 185 | Pipe for an avg. lead upto 50 Mtr |
| 186 | Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 187 | Soiling for an avg. lead upto 50 Mtr |
| 188 | Soiling for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 189 | Sand & Agg.20mm for an avg. lead upto 50 Mtr |
| 190 | Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 191 | 40mm Agg. for an avg. lead upto 50 Mtr |
| 192 | 40mm Agg. for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 193 | Carriage of Pipes from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour |
| 194 | 100 mm dia DI/ GI pipes 50 m |
| 195 | 100 mm dia DI/ GI pipes beyond 50 m or part therof beyond first 50 m |
| 196 | 150 mm dia DI/ GI pipes 50 m |
| 197 | 150 mm dia DI/ GI pipes beyond 50 m or part therof beyond first 50 m |
| 198 | 200 mm dia DI pipes 50 m |
| 199 | 200mm dia DI pipes 50m or part therof beyond first 50m |
| 200 | Centering and shuttering including strutting, propping etc, and removal of form for. |
| 201 | Foundations, footings, bases of columns etc for mass concrete. |
| 202 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 203 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 204 | Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work including dismantling of old (in case of replacement) and carriage of same to divisional store, Complete job |
| 205 | 200 mm dia |
| 206 | 150 mm dia |
| 207 | 100mm dia |
| 208 | 80mm dia |
| 209 | 50mm dia |
| 210 | Engagement of JCB including haltage charges for all reasons |
| 211 | Opening out old wire crates those and re-binding after filling. |
| 212 | Filling empty cement bags with sand/ earth including cost of bags and earth / sand (Earth or sand to be locally excavated) including all sorts of carriages upto actual site of work |
| 213 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 214 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters. |
| 215 | Upto 150 mm diameter. |
| 216 | Above 150 mm diameter. |
| 217 | Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge |
| 218 | Upto 150 mm diameter. |
| 219 | Above 150 mm diaupto 300 mm dia. |
| 220 | Labour for cutting C.I. pipe with steel saw. |
| 221 | 80 mm diameter C.I. pipe |
| 222 | 100 mm diameter C.I. pipe |
| 223 | 125 mm diameter C.I. pipe |
| 224 | 150 mm diameter C.I. pipe |
| 225 | 200 mm diameter C.I. pipe |
| 226 | 250 mm diameter C.I. pipe |
| 227 | Hire charges for welding plant for necessary repairs of pipe network/structures etc as per requirement including C/O operator, Genrator, welding rods, wiring and carriage of man and machinary complete in all respects as per requirement at site but excluding additional materials like collar, pipe specials, steel section etc. |
| 228 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
| 229 | Supply of wire crates including all types of carriages upto site of work. |
| 230 | Supply of stones including all types of carriages upto site of work. |
| 231 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 232 | Repairment of monoblock motors of different capacities including dismembering, rewinding, refixing, testing, commissioning and all carriages complete in all respects |
| 233 | 1.00 H.P |
| 234 | 1.5 H.P |
| 235 | 2.00 H.P |
| 236 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. |
| 237 | For thickness of tiles 10 mm to 25 mm |
| 238 | For thickness of tiles above 25 mm and upto 40 mm. |
| 239 | Supply of Spun yarn |
| 240 | Supply of Pig Lead at site of work |
| 241 | P/F of PPR pipe, including all pipe fitting, carriages upto Site of work complete in all respects |
| 242 | 25 mm |
| 243 | 32 mm |
| 244 | Providing of PPR Gate valves/ Ball valves including all necessary accessories as per requirement at site complete |
| 245 | 25 mm Gate valve/ Ball valve |
| 246 | 40 mm Gate valve/ Ball valve |
| 247 | Supply of Nallah Muck including laying of same manually/ mechanically including all sorts of carriage complete |
| 248 | Fabrication of GI bends of required angle/size, Tees, tail pices etc at site using welding job including cutting of pipes, fixing of flunges, nuts, bolts, washers etc for Washout system. The job includes carriage of man , machinary, carriage of pipe material from departmental store upto site of work complete in all respects. Cost of flanges will be paid separately |
| 249 | 80mm dia |
| 250 | 100mm dia |
| 251 | 150mm dia |
| 252 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position & binding all complete upto/above plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 253 | Fixing charges of double collars of 150/100/80/65 mm dia incl cost of earthwork , refilling , wooden pegs , spun yarn and cutting of pipe wherever required and all carriages complete. |
| 254 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately) |
| 255 | 50 mm dia |
| 256 | 100mm dia |
| 257 | 150mm dia |
| 258 | Providing Steel weld mesh trash guard . |
| 259 | Providing and fixing of Green shaded construction net to cover up pcollection chambers /water tanks/PSTs. |
| 260 | Engagement of men. (Labour / Coolie) |
| 261 | Providing/ fixing of Rubber Gaskets: 80 mm dia |
| 262 | 100 mm dia |
| 263 | 150 mm dia |
| 264 | 200 mm dia |
| 265 | 250 mm dia |
| 266 | Providing/ fixing of Rubber Washers: 80 mm dia |
| 267 | 100 mm dia |
| 268 | 150 mm dia |
| 269 | 200 mm dia |
| 270 | 250 mm dia |
| 271 | Provision for monthly recharge for JIO Fibre for Divisional/Sub Divisional office. Please Enable Macros to View BoQ information |
